CO2-Inkubatoren, diverse

P0628-5080, Omnilab

51033772, Omnilab

Introducing the first-to-market, certified cleanroom compatible CO2 Incubator, 3rd party validated to be appropriate for use ISO Class 5 and GMP grade A/B environments in accordance with ISO 14644-1. Featuring next-level particulate and contamination control, increased compatibility with cleaning procedures in the cleanroom, and documentation to support the validation process, this incubator sets the standard for transitioning for research to commercial settings. Certified Cleanroom and GMP Compatibility - Certified compatible for ISO Class 5 and GMP Grade A/B environments in accordance with DIN EN ISO 14644-1. - Active Particle Control System patent-pending technology controlling the number of particulates released into the cleanroom. - Brushed stainless steel exterior casing with IP54 rating for superior cleaning compatibility. - Documentation package included to support timely and rapid validation processes. Direct Heat Chamber - 165L or 250L electropolished stainless steel chamber with compact footprint, easily stackable. - Adjustable, perforated shelving. THRIVE Active Airflow - In-chamber fan gently distributes clean, humidified air throughout the chamber ensuring homogeneous conditions. - Fast recovery of all parameters ten minutes or less for stable culturing conditions. - Auto-stop function disables fan operation during door openings to minimize air exchange. ISO 5 HEPA Filtration - In-chamber HEPA continuously filters the entire chamber air volume every 60 seconds. - ISO 5 clean room air quality is achieved in the culture chamber within five minutes. - Continuous protection by minimizing ability for contaminants to settle on interior surfaces. Protected Humidity Reservoir - Directly heated water reservoir provides stable high relative humidity levels, preventing culture desiccation. - Condensation free inner chamber, prevents a breeding ground for contaminant. - 5X faster humidity recovery than traditional water pan designs. In situ sensors and probes - Dual temperature probes for over temperature protection with operational back up. - Single beam, dual wavelength infrared (IR) CO2sensor. - O2control ranges 1 to 21% (hypoxic) and 5 to 90% (hyperoxic). Steri-Run, high temperature defection cycle - Overnight cycle simplifies cleaning and eliminates the need for separate autoclaving of parts. - 180°C cycle assures uniform 6-log sterilization on all chamber surfaces. Intuitive, interactive iCAN™ Touchscreen Control - Bright, door-mounted display for easy accessibility and viewing. - Selectable languages simplify operation: English, Spanish, German, French, Italian, Japanese and Mandarin. Introducing the first-to-market, certified cleanroom compatible CO2 Incubator, 3rd party validated to be appropriate for use ISO Class 5 and GMP grade A/B environments in accordance with ISO 14644-1. Featuring next-level particulate and contamination control, increased compatibility with cleaning procedures in the cleanroom, and documentation to support the validation process, this incubator sets the standard for transitioning for research to commercial settings. Certified Cleanroom and GMP Compatibility - Certified compatible for ISO Class 5 and GMP Grade A/B environments in accordance with DIN EN ISO 14644-1. - Active Particle Control System patent-pending technology controlling the number of particulates released into the cleanroom. - Brushed stainless steel exterior casing with IP54 rating for superior cleaning compatibility. - Documentation package included to support timely and rapid validation processes. Direct Heat Chamber - 165L or 250L electropolished stainless steel chamber with compact footprint, easily stackable. - Adjustable, perforated shelving. THRIVE Active Airflow - In-chamber fan gently distributes clean, humidified air throughout the chamber ensuring homogeneous conditions. - Fast recovery of all parameters ten minutes or less for stable culturing conditions. - Auto-stop function disables fan operation during door openings to minimize air exchange. ISO 5 HEPA Filtration - In-chamber HEPA continuously filters the entire chamber air volume every 60 seconds. - ISO 5 clean room air quality is achieved in the culture chamber within five minutes. - Continuous protection by minimizing ability for contaminants to settle on interior surfaces. Protected Humidity Reservoir - Directly heated water reservoir provides stable high relative humidity levels, preventing culture desiccation. - Condensation free inner chamber, prevents a breeding ground for contaminant. - 5X faster humidity recovery than traditional water pan designs. In situ sensors and probes - Dual temperature probes for over temperature protection with operational back up. - Single beam, dual wavelength infrared (IR) CO2sensor. - O2control ranges 1 to 21% (hypoxic) and 5 to 90% (hyperoxic). Steri-Run, high temperature defection cycle - Overnight cycle simplifies cleaning and eliminates the need for separate autoclaving of parts. - 180°C cycle assures uniform 6-log sterilization on all chamber surfaces. Intuitive, interactive iCAN™ Touchscreen Control - Bright, door-mounted display for easy accessibility and viewing. - Selectable languages simplify operation: English, Spanish, German, French, Italian, Japanese and Mandarin.

51030287, Omnilab

Advanced incubator design for sensitive cultures like stem and primary cells in leading research, pharmaceutical and clinical applications. Through a holistic approach to culturing, these incubators provide everything necessary for most demanding and highly critical applications. High-temperature sterilisation with push button simplicity: the Steri-Run™ high temperature sterilisation 180 °C cycle simplifies cleaning and eliminates the need for separate autoclaving of parts. With the push of a button, the simple overnight routine provides fast disinfection of all surfaces in the incubator chamber - fully automatic. - Condensation free humidification system: integral covered humidity reservoir maximises relative humidity without condensation. - iCAN™ touchscreen interface allows for an intuitive control with complete data visibility. - HEPA air filtration for air purity. - The THRIVE™ active airflow technology delivers homogeneous growth conditions fast, avoiding unwanted sample variation. - Complete contamination control: proven protection from every direction incl. ISO class 5 HEPA filtered air, on-demand high-temperature sterilisation and easy to maintain copper. - Designed to focus on convenience. - In-chamber fan gently and evenly distributes clean, humidified air throughout the chamber ensuring all cells experience the same conditions without the threat of desiccation. - Advanced in-situ sensor technology: probes and gas sensors are positioned in the chamber to respond quickly to any deviations in desired conditions. - Dual temperature probes with PID controller provide over temperature protection by preventing overshoot during recovery; temperatures recover under 5 min. - Oxygen controlled models are equipped with advanced Zirconium oxide sensors. - Interior chamber: electropolished st. steel or 100 % solid copper. - Compact foot print, readily stackable. - Adjustable, perforated shelving. - Easy-to-clean, coved corners with convenient access port. - Reversible exterior door for added flexibility. - 2 year parts and labor warranty. IR sensor: Temperature resistant, bulb-free IR CO2 sensor with MEMS emitter technology: this sensor is ideal for labs looking for the best of both technologies for advanced, high volume or value culturing. - Internal auto-calibration eliminates drift due to changes in ambient conditions that can affect traditional IR sensors. - IR180Si CO2 measurement not affected by changes in temperature, humidity, oxygen or barometric pressure. - Highly responsive with recovery under 5 min from door openings. TC sensor: The TC180 offers the performance advantages of traditional IR technologies without the limiting lifespan of a standard incandescent bulb. This sensor is ideal for everyday cell culture applications. - Improved stability with internal humidity compensation. - CO2 values unaffected by changes in humidity. - Economical, long service life. Advanced incubator design for sensitive cultures like stem and primary cells in leading research, pharmaceutical and clinical applications. Through a holistic approach to culturing, these incubators provide everything necessary for most demanding and highly critical applications. High-temperature sterilisation with push button simplicity: the Steri-Run™ high temperature sterilisation 180 °C cycle simplifies cleaning and eliminates the need for separate autoclaving of parts. With the push of a button, the simple overnight routine provides fast disinfection of all surfaces in the incubator chamber - fully automatic. - Condensation free humidification system: integral covered humidity reservoir maximises relative humidity without condensation. - iCAN™ touchscreen interface allows for an intuitive control with complete data visibility. - HEPA air filtration for air purity. - The THRIVE™ active airflow technology delivers homogeneous growth conditions fast, avoiding unwanted sample variation. - Complete contamination control: proven protection from every direction incl. ISO class 5 HEPA filtered air, on-demand high-temperature sterilisation and easy to maintain copper. - Designed to focus on convenience. - In-chamber fan gently and evenly distributes clean, humidified air throughout the chamber ensuring all cells experience the same conditions without the threat of desiccation. - Advanced in-situ sensor technology: probes and gas sensors are positioned in the chamber to respond quickly to any deviations in desired conditions. - Dual temperature probes with PID controller provide over temperature protection by preventing overshoot during recovery; temperatures recover under 5 min. - Oxygen controlled models are equipped with advanced Zirconium oxide sensors. - Interior chamber: electropolished st. steel or 100 % solid copper. - Compact foot print, readily stackable. - Adjustable, perforated shelving. - Easy-to-clean, coved corners with convenient access port. - Reversible exterior door for added flexibility. - 2 year parts and labor warranty. IR sensor: Temperature resistant, bulb-free IR CO2 sensor with MEMS emitter technology: this sensor is ideal for labs looking for the best of both technologies for advanced, high volume or value culturing. - Internal auto-calibration eliminates drift due to changes in ambient conditions that can affect traditional IR sensors. - IR180Si CO2 measurement not affected by changes in temperature, humidity, oxygen or barometric pressure. - Highly responsive with recovery under 5 min from door openings. TC sensor: The TC180 offers the performance advantages of traditional IR technologies without the limiting lifespan of a standard incandescent bulb. This sensor is ideal for everyday cell culture applications. - Improved stability with internal humidity compensation. - CO2 values unaffected by changes in humidity. - Economical, long service life.

9038427, Omnilab

6731000351, Omnilab

W348923-F, Omnilab

51032719, Omnilab

Zum Schutz Ihrer wertvollen Proben und für optimales Zellwachstum. Thermo Scientific™ Heracell™ 150i CO2-Inkubatoren bieten die ideale In-vitro-Umgebung. Die zuverlässigen und anwenderfreundlichen Inkubatoren bieten schnelle Erholzeiten und eine intuitive Bedienung. Von Natur aus leicht zu reinigen und zu pflegen. Wärmekammer mit Direktbeheizung - Kammer mit 150 l (5,3 cu. ft.) aus 100 % elektropoliertem Edelstahl mit geringer Stellfläche, leicht stapelbar - Standard-Türanschlag rechts kann vor Ort leicht durch einen qualifizierten Servicetechniker gewechselt werden - Minimale, einfach zu reinigende Baugruppe, Innenkammer mit glatter Oberfläche und abgerundeten Ecken ermöglicht einfache Reinigung - Ein in die Kammer integrierter Lüfter verteilt saubere, befeuchtete Luft sanft in der gesamten Kammer und gewährleistet so homogene Bedingungen In-situ-Sensoren und -Sonden für eine präzise Überwachung - Wahlweise mit TC(Wärmeleitfähigkeits)-CO2-Sensor für einen langen, zuverlässigen Betrieb oder IR(Infrarot)-CO2-Sensor für die Überwachung, wenn Feuchtigkeit und Temperatur weniger vorhersehbar sind - Zwei Temperaturfühler mit Übertemperaturschutz Schnell reagierendes Befeuchtungsreservoir - Direkt beheiztes Wasserreservoir gewährleistet konstant eine hohe relative Luftfeuchtigkeit und verhindert so ein Austrocknen der Kultur - Wannenloses System bietet bis zu 5 Mal schnellere Rückgewinnungsraten als herkömmliche Systeme mit Wasserwannen - Der Wasserstandsensor zeigt an, wann eine Nachfüllung erforderlich ist. ContraCon Desinfektionszyklus mit feuchter Hitze bei 90°C - Ein bedarfsgesteuerter Zyklus vereinfacht die Reinigung und macht separates Autoklavieren von Teilen überflüssig. - Die Bedienung erfolgt einfach per Knopfdruck und erfordert kein Abnehmen von Sensoren oder anderen Komponenten. - Unabhängig validiert für die Beseitigung einer Vielzahl von Kontaminanten, darunter Bakterien, Schimmelpilze, Pilzsporen und Mykoplasmen Thermo Scientific Heracell™ i series CO2 incubators provide a very good in vitro environment: clean, reliable and easy to use, protecting samples while optimising cell growth. - Available in 2 sizes: 150 and 240 l and in non-corrosive stainless steel or 100 % pure antimicrobial copper. - ContraCon 90 °C moist heat decontamination. - Rapid Humidity Recovery. - iCAN™ touchscreen improves visibility and control of important incubator information helping to achieve culturing goals. - Optional TC- or IR-CO2-sensor. - Optional Trigas-O2-control for hypoxic and hyperoxic applications. Zum Schutz Ihrer wertvollen Proben und für optimales Zellwachstum. Thermo Scientific™ Heracell™ 150i CO2-Inkubatoren bieten die ideale In-vitro-Umgebung. Die zuverlässigen und anwenderfreundlichen Inkubatoren bieten schnelle Erholzeiten und eine intuitive Bedienung. Von Natur aus leicht zu reinigen und zu pflegen. Wärmekammer mit Direktbeheizung - Kammer mit 150 l (5,3 cu. ft.) aus 100 % elektropoliertem Edelstahl mit geringer Stellfläche, leicht stapelbar - Standard-Türanschlag rechts kann vor Ort leicht durch einen qualifizierten Servicetechniker gewechselt werden - Minimale, einfach zu reinigende Baugruppe, Innenkammer mit glatter Oberfläche und abgerundeten Ecken ermöglicht einfache Reinigung - Ein in die Kammer integrierter Lüfter verteilt saubere, befeuchtete Luft sanft in der gesamten Kammer und gewährleistet so homogene Bedingungen In-situ-Sensoren und -Sonden für eine präzise Überwachung - Wahlweise mit TC(Wärmeleitfähigkeits)-CO2-Sensor für einen langen, zuverlässigen Betrieb oder IR(Infrarot)-CO2-Sensor für die Überwachung, wenn Feuchtigkeit und Temperatur weniger vorhersehbar sind - Zwei Temperaturfühler mit Übertemperaturschutz Schnell reagierendes Befeuchtungsreservoir - Direkt beheiztes Wasserreservoir gewährleistet konstant eine hohe relative Luftfeuchtigkeit und verhindert so ein Austrocknen der Kultur - Wannenloses System bietet bis zu 5 Mal schnellere Rückgewinnungsraten als herkömmliche Systeme mit Wasserwannen - Der Wasserstandsensor zeigt an, wann eine Nachfüllung erforderlich ist. ContraCon Desinfektionszyklus mit feuchter Hitze bei 90°C - Ein bedarfsgesteuerter Zyklus vereinfacht die Reinigung und macht separates Autoklavieren von Teilen überflüssig. - Die Bedienung erfolgt einfach per Knopfdruck und erfordert kein Abnehmen von Sensoren oder anderen Komponenten. - Unabhängig validiert für die Beseitigung einer Vielzahl von Kontaminanten, darunter Bakterien, Schimmelpilze, Pilzsporen und Mykoplasmen Thermo Scientific Heracell™ i series CO2 incubators provide a very good in vitro environment: clean, reliable and easy to use, protecting samples while optimising cell growth. - Available in 2 sizes: 150 and 240 l and in non-corrosive stainless steel or 100 % pure antimicrobial copper. - ContraCon 90 °C moist heat decontamination. - Rapid Humidity Recovery. - iCAN™ touchscreen improves visibility and control of important incubator information helping to achieve culturing goals. - Optional TC- or IR-CO2-sensor. - Optional Trigas-O2-control for hypoxic and hyperoxic applications.

W348902-D, Omnilab

6731000221, Omnilab

51033775, Omnilab

Introducing the first-to-market, certified cleanroom compatible CO2 Incubator, 3rd party validated to be appropriate for use ISO Class 5 and GMP grade A/B environments in accordance with ISO 14644-1. Featuring next-level particulate and contamination control, increased compatibility with cleaning procedures in the cleanroom, and documentation to support the validation process, this incubator sets the standard for transitioning for research to commercial settings. Certified Cleanroom and GMP Compatibility - Certified compatible for ISO Class 5 and GMP Grade A/B environments in accordance with DIN EN ISO 14644-1. - Active Particle Control System patent-pending technology controlling the number of particulates released into the cleanroom. - Brushed stainless steel exterior casing with IP54 rating for superior cleaning compatibility. - Documentation package included to support timely and rapid validation processes. Direct Heat Chamber - 165L or 250L electropolished stainless steel chamber with compact footprint, easily stackable. - Adjustable, perforated shelving. THRIVE Active Airflow - In-chamber fan gently distributes clean, humidified air throughout the chamber ensuring homogeneous conditions. - Fast recovery of all parameters ten minutes or less for stable culturing conditions. - Auto-stop function disables fan operation during door openings to minimize air exchange. ISO 5 HEPA Filtration - In-chamber HEPA continuously filters the entire chamber air volume every 60 seconds. - ISO 5 clean room air quality is achieved in the culture chamber within five minutes. - Continuous protection by minimizing ability for contaminants to settle on interior surfaces. Protected Humidity Reservoir - Directly heated water reservoir provides stable high relative humidity levels, preventing culture desiccation. - Condensation free inner chamber, prevents a breeding ground for contaminant. - 5X faster humidity recovery than traditional water pan designs. In situ sensors and probes - Dual temperature probes for over temperature protection with operational back up. - Single beam, dual wavelength infrared (IR) CO2sensor. - O2control ranges 1 to 21% (hypoxic) and 5 to 90% (hyperoxic). Steri-Run, high temperature defection cycle - Overnight cycle simplifies cleaning and eliminates the need for separate autoclaving of parts. - 180°C cycle assures uniform 6-log sterilization on all chamber surfaces. Intuitive, interactive iCAN™ Touchscreen Control - Bright, door-mounted display for easy accessibility and viewing. - Selectable languages simplify operation: English, Spanish, German, French, Italian, Japanese and Mandarin. Introducing the first-to-market, certified cleanroom compatible CO2 Incubator, 3rd party validated to be appropriate for use ISO Class 5 and GMP grade A/B environments in accordance with ISO 14644-1. Featuring next-level particulate and contamination control, increased compatibility with cleaning procedures in the cleanroom, and documentation to support the validation process, this incubator sets the standard for transitioning for research to commercial settings. Certified Cleanroom and GMP Compatibility - Certified compatible for ISO Class 5 and GMP Grade A/B environments in accordance with DIN EN ISO 14644-1. - Active Particle Control System patent-pending technology controlling the number of particulates released into the cleanroom. - Brushed stainless steel exterior casing with IP54 rating for superior cleaning compatibility. - Documentation package included to support timely and rapid validation processes. Direct Heat Chamber - 165L or 250L electropolished stainless steel chamber with compact footprint, easily stackable. - Adjustable, perforated shelving. THRIVE Active Airflow - In-chamber fan gently distributes clean, humidified air throughout the chamber ensuring homogeneous conditions. - Fast recovery of all parameters ten minutes or less for stable culturing conditions. - Auto-stop function disables fan operation during door openings to minimize air exchange. ISO 5 HEPA Filtration - In-chamber HEPA continuously filters the entire chamber air volume every 60 seconds. - ISO 5 clean room air quality is achieved in the culture chamber within five minutes. - Continuous protection by minimizing ability for contaminants to settle on interior surfaces. Protected Humidity Reservoir - Directly heated water reservoir provides stable high relative humidity levels, preventing culture desiccation. - Condensation free inner chamber, prevents a breeding ground for contaminant. - 5X faster humidity recovery than traditional water pan designs. In situ sensors and probes - Dual temperature probes for over temperature protection with operational back up. - Single beam, dual wavelength infrared (IR) CO2sensor. - O2control ranges 1 to 21% (hypoxic) and 5 to 90% (hyperoxic). Steri-Run, high temperature defection cycle - Overnight cycle simplifies cleaning and eliminates the need for separate autoclaving of parts. - 180°C cycle assures uniform 6-log sterilization on all chamber surfaces. Intuitive, interactive iCAN™ Touchscreen Control - Bright, door-mounted display for easy accessibility and viewing. - Selectable languages simplify operation: English, Spanish, German, French, Italian, Japanese and Mandarin.

WRBPF5111-F, Omnilab

W753685-J-E, Omnilab