Deliver to
United Kingdom
Material: borosilicate glass. For use with counting chambers and haemacytometers. Edges ground and polished. Ready for use, individually packed. Purpose: coverslips for counting chambers and haemocytometers are accessories for in vitro diagnostic examinations in optical microscopy and are used to cover cell suspension in counting chambers and to limit the volume of the cell suspension above the counting grid. Haemacytometre coverslips 0.4 mm In vitro diagnostic medical device class A
Product Detail
Material: borosilicate glass from hydrolytic class I. Applications: examinations using light and fluorescence microscopy, especially in medicine and biology. Thickness no. 1 (0,13-0,16 mm) Absolutely colourless, completely clear, suitable for fluorescence microscopy High light transmission Refractive index tailored to microscopes Low inherent fluorescence Low flatness deviation, exact compliance with thicknesses Good wettability on both glass surfaces Low alkali content encourages cell growth Ready-to-use Suitable for use in coverslippers Acc. to DIN ISO 8255 Purpose: coverslips are accessories for in vitro diagnostic examinations in optical microscopy and are used to cover specimens for archiving purposes. Coverslips thickness 1 round In vitro diagnostic medical device class A
Product Detail
Material: borosilicate glass. Thickness no. 1.5 (0.16 to 0.19 mm) Virtually free from surface defects, inclusions, streaks and bubbles and unwanted striations thanks to high optical homogeneity Highly transparent and colourless, preventing colour distortions Absorption-free within the visible spectrum Very consistent wettability High planarity Coverslips thickness 1.5 Not a medical device / Not an IVD product
Product Detail
Material: borosilicate glass from hydrolytic class I. Thickness no. 1 (0.13-0.16 mm) Colourless, absorption-free within the visible spectrum Optically pure, free from streaks, bubbles, striations Excellent chemical resistance Without disruptive autofluorescence even when stimulated in the near UV spectrum (e.g. 365 nm) Refractive index 1.5230 Acc. to ISO 8255-1 Coverslips thickness 1 In vitro diagnostic medical device class A
Product Detail
Material: borosilicate glass from hydrolytic class I. Applications: examinations using light and fluorescence microscopy, especially in medicine and biology. Thickness 1.5 (0,16-0,19 mm) Absolutely colourless, completely clear, suitable for fluorescence microscopy High light transmission Refractive index tailored to microscopes Low inherent fluorescence Low flatness deviation, exact compliance with thicknesses Good wettability on both glass surfaces Low alkali content encourages cell growth Ready-to-use Suitable for use in coverslippers Meets the requirements of DIN ISO 8255 Purpose: coverslips are accessories for in vitro diagnostic examinations in optical microscopy and are used to cover specimens for archiving purposes. Coverslips thickness 1.5 round In vitro diagnostic medical device class A
Product Detail
Material: borosilicate glass from hydrolytic class I. Thickness no. 1 (0.13-0.16 mm) Colourless, absorption-free within the visible spectrum Optically pure, free from streaks, bubbles, striations Excellent chemical resistance Without disruptive autofluorescence even when stimulated in the near UV spectrum (e.g. 365 nm) Refractive index 1.5230 Acc. to ISO 8255-1 Coverslips thickness 1 round In vitro diagnostic medical device class A
Product Detail
Material: borosilicate glass. Thickness no. 1 (0.13 to 0.16 mm) Virtually free from surface defects, inclusions, streaks and bubbles and unwanted striations thanks to high optical homogeneity Highly transparent and colourless, preventing colour distortions Absorption-free within the visible spectrum Very consistent wettability High planarity Coverslips thickness 1 Not a medical device / Not an IVD product
Product Detail
Material: vinyl. Thickness: 0.157 mm Individual coverslips are separated from each other by layers of paper Coverslips plastic Not a medical device / Not an IVD product
Product Detail
Material: borosilicate glass from hydrolytic class I. Applications: examinations using light and fluorescence microscopy, especially in medicine and biology. Thickness 1.5 (0,16-0,19 mm) Absolutely colourless, completely clear, suitable for fluorescence microscopy High light transmission Refractive index tailored to microscopes Low inherent fluorescence Low flatness deviation, exact compliance with thicknesses Good wettability on both glass surfaces Low alkali content encourages cell growth Ready-to-use Suitable for use in coverslippers Meets the requirements of DIN ISO 8255 Purpose: coverslips are accessories for in vitro diagnostic examinations in optical microscopy and are used to cover specimens for archiving purposes. Coverslips thickness 1.5 In vitro diagnostic medical device class A
Product Detail
Material: borosilicate glass from hydrolytic class I. 1.5H thickness (0.17 ±0.005 mm), specially for high-resolution precision instruments Absolutely colourless, completely clear, suitable for fluorescence microscopy Refractive index 1.524 to 1.527 at 546.07 nm Ideal for lenses with a high numeric aperture and high resolving power, e.g.: Dry lenses (air immersion): N.A. >0.7 Water immersion lenses: N.A. >1.0 Glycerine immersion lenses: N.A. >1.2 Oil immersion lenses: N.A. >1.3 Purpose: coverslips are accessories for in vitro diagnostic examinations in optical microscopy and are used to cover specimens for archiving purposes. Coverslips thickness 1.5H In vitro diagnostic medical device class A
Product Detail
Material: borosilicate glass from hydrolytic class I. 1.5H thickness (0.17 ±0.005 mm), specially for high-resolution precision instruments Absolutely colourless, completely clear, suitable for fluorescence microscopy Refractive index 1.524 to 1.527 at 546.07 nm Ideal for lenses with a high numeric aperture and high resolving power, e.g.: Dry lenses (air immersion): N.A. >0.7 Water immersion lenses: N.A. >1.0 Glycerine immersion lenses: N.A. >1.2 Oil immersion lenses: N.A. >1.3 Purpose: coverslips are accessories for in vitro diagnostic examinations in optical microscopy and are used to cover specimens for archiving purposes. Coverslips thickness 1.5H round In vitro diagnostic medical device class A
Product Detail
Material: borosilicate glass from hydrolytic class I. Thickness no. 1 (0.13-0.16 mm) Colourless, absorption-free within the visible spectrum Optically pure, free from streaks, bubbles, striations Excellent chemical resistance Without disruptive autofluorescence even when stimulated in the near UV spectrum (e.g. 365 nm) Refractive index 1.5230 Acc. to ISO 8255-1 Coverslips thickness 1 round In vitro diagnostic medical device class A
Product Detail© 2023 Copyright. All Rights Reserved. Unit 19, Euroway House, Roydsdale Way, Bradford, BD4 6SE, UK
© 2023 Copyright. All Rights Reserved. Unit 19, Euroway House, Roydsdale Way, Bradford, BD4 6SE, UK
