Power Controllers

65000116, Omnilab

Electromechanical, infinitely variable control over power outlet. 1.5 m power supply (earthed) cable with plug. - Switching power max. 2990 W (13 A). - Nominal voltage 230 V AC. - Dimensions: 120 x 65 x 55 mm. Electromechanical, infinitely variable control over power outlet. 1.5 m power supply (earthed) cable with plug. - Switching power max. 2990 W (13 A). - Nominal voltage 230 V AC. - Dimensions: 120 x 65 x 55 mm.

65001004, Omnilab

Freely configurable electronical temperature regulator with two displays indicating the desired and actual values, for temperatures up to 1200 °C. 1.5 m power supply (earthed) cable with plug. - Housing with fixed support clamp. - Ramp function and USB port for external configuration. Freely configurable electronical temperature regulator with two displays indicating the desired and actual values, for temperatures up to 1200 °C. 1.5 m power supply (earthed) cable with plug. - Housing with fixed support clamp. - Ramp function and USB port for external configuration.

9007129, Omnilab

65001003, Omnilab

Freely configurable electronical temperature regulator with two displays indicating the desired and actual values, for temperatures up to 1200 °C. 1.5 m power supply (earthed) cable with plug. - Housing with fixed support clamp. - Ramp function and USB port for external configuration. Freely configurable electronical temperature regulator with two displays indicating the desired and actual values, for temperatures up to 1200 °C. 1.5 m power supply (earthed) cable with plug. - Housing with fixed support clamp. - Ramp function and USB port for external configuration.

9007226, Omnilab

TR 28-3T, Omnilab

Temperature controller TR 28-3T: This microprocessor controlled temperature regulator is suitable for the high temperature hotplate (PZ 28-3T Order No. 5645756). After adjustment of the temperature setpoint by the membrane keypad, the PlD contoller keeps it constant (control deviation 2 K or less). Programmer PR 5-3T: Offers a comprehensive time / temperature regulation for the high temperature hotplate. Pressing the start key activates a programme of up to 5 ramps. Max. 5 ramps (consisting of ramp time, constant temperature and time of constant temperature) can be programmed. 3 programme sets can be loaded into the non-volatile memory. A programmed lead time enables the activation of the start up to 99 h in advance. Every temperature and time parameter can be selected with its own key. Back-up by an EEProm. The device is equipped with a change-over switch to continuous control, buzzer signal at the end of the program. Furthermore the programmer shows the remaining time of a ramp. When the set key is pressed, the display changes to show the setpoint. On request the devices are available with a temperature limiter to avoid superheating. Temperature controller TR 28-3T: This microprocessor controlled temperature regulator is suitable for the high temperature hotplate (PZ 28-3T Order No. 5645756). After adjustment of the temperature setpoint by the membrane keypad, the PlD contoller keeps it constant (control deviation 2 K or less). Programmer PR 5-3T: Offers a comprehensive time / temperature regulation for the high temperature hotplate. Pressing the start key activates a programme of up to 5 ramps. Max. 5 ramps (consisting of ramp time, constant temperature and time of constant temperature) can be programmed. 3 programme sets can be loaded into the non-volatile memory. A programmed lead time enables the activation of the start up to 99 h in advance. Every temperature and time parameter can be selected with its own key. Back-up by an EEProm. The device is equipped with a change-over switch to continuous control, buzzer signal at the end of the program. Furthermore the programmer shows the remaining time of a ramp. When the set key is pressed, the display changes to show the setpoint. On request the devices are available with a temperature limiter to avoid superheating.

65001001, Omnilab

Freely configurable electronical temperature regulator with two displays indicating the desired and actual values, for temperatures up to 1200 °C. 1.5 m power supply (earthed) cable with plug. - Housing with fixed support clamp. - Ramp function and USB port for external configuration. Freely configurable electronical temperature regulator with two displays indicating the desired and actual values, for temperatures up to 1200 °C. 1.5 m power supply (earthed) cable with plug. - Housing with fixed support clamp. - Ramp function and USB port for external configuration.

PR 5-3T, Omnilab

Temperature controller TR 28-3T: This microprocessor controlled temperature regulator is suitable for the high temperature hotplate (PZ 28-3T Order No. 5645756). After adjustment of the temperature setpoint by the membrane keypad, the PlD contoller keeps it constant (control deviation 2 K or less). Programmer PR 5-3T: Offers a comprehensive time / temperature regulation for the high temperature hotplate. Pressing the start key activates a programme of up to 5 ramps. Max. 5 ramps (consisting of ramp time, constant temperature and time of constant temperature) can be programmed. 3 programme sets can be loaded into the non-volatile memory. A programmed lead time enables the activation of the start up to 99 h in advance. Every temperature and time parameter can be selected with its own key. Back-up by an EEProm. The device is equipped with a change-over switch to continuous control, buzzer signal at the end of the program. Furthermore the programmer shows the remaining time of a ramp. When the set key is pressed, the display changes to show the setpoint. On request the devices are available with a temperature limiter to avoid superheating. Temperature controller TR 28-3T: This microprocessor controlled temperature regulator is suitable for the high temperature hotplate (PZ 28-3T Order No. 5645756). After adjustment of the temperature setpoint by the membrane keypad, the PlD contoller keeps it constant (control deviation 2 K or less). Programmer PR 5-3T: Offers a comprehensive time / temperature regulation for the high temperature hotplate. Pressing the start key activates a programme of up to 5 ramps. Max. 5 ramps (consisting of ramp time, constant temperature and time of constant temperature) can be programmed. 3 programme sets can be loaded into the non-volatile memory. A programmed lead time enables the activation of the start up to 99 h in advance. Every temperature and time parameter can be selected with its own key. Back-up by an EEProm. The device is equipped with a change-over switch to continuous control, buzzer signal at the end of the program. Furthermore the programmer shows the remaining time of a ramp. When the set key is pressed, the display changes to show the setpoint. On request the devices are available with a temperature limiter to avoid superheating.