Deliver to
United Kingdom
Material: DURAN ® glass. Autoclavable: yes. NS 19/26, volume 100 ml. Total height 160 mm. Autoclavable without rubber hose. TLC atomiser with Erlenmeyer flask Delivery incl. Erlenmeyer flask, clamp for ground joint and rubber ball with 20 cm rubber hose.
Product Detail
Versatile spray unit with gas cartridge for spraying reagents and other aqueous liquids. Constant spray pressure approx. 4.4 bar. Eco-friendly propellant mixture of dimethyl ether, propane and isobutane. Sufficient for approx. 500 ml liquid. Easy to clean: unscrew the cartridge, immerse the riser in a container with cleaning liquid and spray until the spray jet contains no residue. Propellants: dimethyl ether, isobutane, propane. Spray unit Delivery incl. propellant cartridge (55 g or 94 ml), glass reservoir bottle 170 ml, suction tube and screw cap.
Product Detail
Material: DURAN ® glass. Autoclavable: yes. Autoclavable without rubber hose. TLC atomiser with test tube Delivery incl. clamp for ground joint and rubber ball.
Product Detail
Based on pure liquefied gas with low global warming potential (GWP = 7). The dry, oil-free compressed gas leaves no residue, is non-flammable acc. to Directive 2008/47/EC and can also be used on live equipment. The spray can is fitted with a special convenient spray nozzle for effective, precise blowing-out of dust and dirt. Application: for removing dust and dirt in electronics and precision mechanics. Also suitable for use on sensitive components such as lenses and sensors. Propellant: hydrofluoroolefin (HFO). Compressed air spray 67 SUPER Delivery incl. convenient spray nozzle with wide coverage area and spray tube guide
Product Detail
Silicone-based mould release agent for duromers and thermoplastic materials. With high, long-lasting release capacity. Its extremely thin spray film is easy to apply and provides improved lubricity, surface gloss and scratch resistance.Heat resistant up to approx. 150 °C, leaves no residues on hot surfaces. Propellant: butane/pentane/propane/isobutane Silicone spray KORASILON ® release agent M Spray bottle 400 ml
Product Detail
Highly purified cooling agent for the highest demands with extra-strong cooling effect down to -45 °C. Low global warming potential (GWP = 7). Non-flammable according to Directive 2008/47/EC; for use on live equipment, the ambient temperature should be below 28 °C. In combination with the Dual Action spray system, it provides an extra-strong cooling effect. The convenient Dual Action spray system has a wide coverage area and a long folding spray tube for precise application, even in hard-to-reach areas. Suitable for fast, effective cooling of surfaces and components. For thermal troubleshooting on electronic components, to avoid overheating during soldering, for checking thermostats and thermal sensors and for cold-shrinking small metal components. Propellant: hydrofluoroolefin (HFO). Cold spray 75 SUPER Delivery incl. spray tube for targeted application.
Product Detail
Material: PET (bottle), PP (spray attachment, white). Colourless, transparent reusable spray bottle with adjustable spray attachment. Stem of the spray attachment can be cut to the desired length. Spray bottle
Product Detail
Material: PP. With pistol pump level and adjustable spray jet. Spray bottle with pump atomiser
Product Detail
Material: PET (bottle), PP (spray attachment, white). Colourless, transparent reusable spray bottle with adjustable spray attachment. Stem of the spray attachment can be cut to the desired length. Spray bottle
Product Detail
Multi-purpose PTFE lubricant, slip and release agent with extremely low friction coefficient. Resistant against water, oil and aggressive media. Anti-adhesive, dirt-repellent, prevents freezing and is temperature stable up to +260 °C. Free from grease and silicone. Propellant: propane/butane. PTFE spray Sprayflon
Product Detail
Material: PP, PE, PA, FKM, stainless steel. With short spray nozzle. The hand pump is used to produce a pressure of up to 4 bar in the container. Then spraying can be effected by pressing the button. Applications: disinfection, cleaning, crop protection, thin-layer chromatography, technical and sanitary requirements. Materials in contact with the media: PP, PE, PA glass-fibre reinforced, V2A, FKM Nozzle Ø 0.6 mm, continuously adjustable Spray lance (length 30 cm) available as an option Pressurised sprayer
Product Detail© 2023 Copyright. All Rights Reserved. Unit 19, Euroway House, Roydsdale Way, Bradford, BD4 6SE, UK
© 2023 Copyright. All Rights Reserved. Unit 19, Euroway House, Roydsdale Way, Bradford, BD4 6SE, UK
