Magigoo Pro Original for all filament types Application Magigoo 3D glue stick. All you need for secure 3D printing adhesion, Magigoo is an easy-to-use 3D printing adhesive designed to release the “first layer that doesn’t stick”. Magigoo provides strong adhesion to the heating plate. But the magic begins when the print is finished: simply wait until the plate has cooled down and then remove your prints with just one tap! In addition, Magigoo helps prevent warping. Isn't it magical? Regardless of whether you are a hobbyist or a professional - it is extremely rewarding to have a 30-hour print completely without warping and to be able to easily remove it after cooling down. We have even had very good results with PEEK and ULTEM. Advantages: Over 100 applications ABS, PLA, PETG, HIPS, ASA, TPU Simple application Easy to remove Easy to clean No odour Non-toxic No additional tools required Easy to transport More beautiful print image Directions for use Easy to use: Using Magigoo is very easy. Shake, press, apply. Spread only on an active print area. It is not necessary to cover the entire surface. Easy to release: The adhesive properties of Magigoo are designed to release the 3D print as soon as the build plate has cooled down. Easy to clean: Magigoo is easy to clean with water. Durable: Magigoo lasts for more than 100 average prints. Odourless and safe: Magigoo is safe to use - whether in a closed room or in a training workshop with children. Important note: The applicator has an active spring valve that is activated when the applicator is pressed against the build plate. Please do not press the bottle as a “ketchup bottle”, otherwise the applicator may pop off. The bottle can be squeezed slightly, only when the spring is pressed against the bed and only if a larger flow is required. The bottle must not be squeezed if the cap is opened at any other time as this may cause adhesive to leak from the bottle.