Magigoo Pro Glue Stick Set for all filament types Magigoo Pro adhesives are designed for professional use and work exclusively with technical filaments. These adhesives for professional use ensure that the prints adhere firmly when the print bed is hot and that the part is easy to remove once it has cooled down and the adhesive residue can also be easily removed. The kit contains: Magigoo Pro PA: designed for professional use to work exclusively with polyamide filaments. Developed and tested for use with various PA (nylon) and fibre-reinforced filament brands. Magigoo Pro PC: designed to work exclusively with polycarbonate type filaments and fibre-reinforced variants. Magigoo Pro PP: developed to work exclusively with polypropylene filaments. Magigoo Original: designed to work with a variety of filaments, including most PLA, ABS, HIPS, PETG and TPU filament types. Application: Shake the bottle vigorously. Apply to the desired area by pressing the nib onto the bed (activating the inner valve) and spreading as required. Print according to the filament/printer manufacturer’s recommendations Allow to cool and remove. Cleaning - Wipe with a damp cloth. Directions for use SAFETY:TIPS: For larger prints, a 20 mm border is recommended. In case of excessive adhesion, it is recommended to wet the print bed with a small amount of water working slowly under the part, which should facilitate the removal of the part. Delivery incl. 1 glue stick á 50 ml Magigoo Original, Magigoo Pro PA, Magigoo Pro PC, Magigoo Pro PP and 1 cleaning cloth.