For the reliable monitoring of dry and moist surfaces as well as solutions in the manufacturing industry, in the food and feed sector, in patient care and nursing, in gastronomy and trade, in training and in many other areas. All the advantages at a glance: Quick and easy sampling Simple and fast measurement within seconds Sensitive and reproducible measurement Measurement of all forms - ATP, ADP and AMP Please note LuciPac ® A3 is not suitable for the detection of virus contamination. Why A3 assay (ATP+ADP+AMP)? A3 detects ATP+ADP+AMP offering higher sensitivity to find microorganisms and biofilms that others miss. Just as fast and easy to use as conventional tests, but its advanced chemistry produces superior detection to uncover contaminants that you may be missing. LuciPac ® A3 for hygiene control of surfaces Directions for use Remove the cotton swab (green holder) from the tube. Moisten the cotton swab with tap water if the surface is completely dry. Wipe the object/the surface. An area of approx. 10 x 10 cm 2 is recommended for optimum results. Put the cotton swab back into the tube. Then press the stick down to open the reaction capsule. Shake the LuciPac ® A3 horizontally several times so that all the liquid flows into the lower reaction capsule. Insert the entire LuciPac ® A3 into the measuring chamber of the Lumitester PD20/ PD30 or Smart and close the measuring chamber cover. Press the ENTER key on the control panel to start the measurement process. The measurement results are displayed after 10 seconds. Remove the sleeve of the LuciPac ® A3 from the measuring chamber.