Booster pump with pressure control: Grundfos Mono CMBE 3-93; 3,7m3/h Accessories for storage tanks The Grundfos CME Booster is a compact booster system for water supply in domestic applications. The integrated speed controller enables the CME Booster to keep constant pressure in the pipe system. A pressure sensor monitoring changes in the water consumption will signal to the speed controller to change the motor speed to adapt per- formance to the new state. The CME Booster is very easy to install. When the pipework has been installed, it is all a matter of plugging the unit into a socket, and the system is operational. The CME Booster consists of: - CME pump with integrated frequency converter - 5-way valve - expansion tank - pressure gauge - pressure sensor (0-10 bar) Features - Constant pressure, integrated speed control - compact - robust, stainless steel - easy installation - dry run protection Thermal protection: CME Booster pumps require no external motor protection. The MGE motor incorporates thermal protection against slow overloading and blocking (IEC 34.11: TP 211). Technical Data: Speed for pump data: 3480 rpm Rated flow: 3.7 m³/h Rated head: 59.8 m Shaft seal: AVBE Approvals and markings: CE Start pressure: Integrated Frequency converter Materials: Pump housing: Stainless steel Pump housing: DIN W.-Nr. 1.4401 Pump housing: AISI 316 Impeller: Stainless steel Impeller: DIN W.-Nr. 1.4401 Impeller: AISI 316 Rubber: EPDM Installation: Maximum ambient temperature: 55°C Flange standard: Whitworth thread Rp Pump inlet: Rp 1-1/4'' Pump outlet: Rp 3/4'' Electrical data: Maximum current consumption: 9.10-7.60 A Rated power - P2: 1.5 kW Mains frequency: 60 Hz Rated voltage: 1 x 200-240 V Rated speed: 360-4000 rpm Enclosure class (IEC 34-5): IP55 Insulation class (IEC 85): F Type of cable plug: SCHUKO Mains cable: 1.5 m Tank volume: 2 l Others: Net weight: 19.4 kg Gross weight: 27.8 kg Booster pump with pressure control: Grundfos Mono CMBE 3-93; 3,7m3/h Accessories for storage tanks The Grundfos CME Booster is a compact booster system for water supply in domestic applications. The integrated speed controller enables the CME Booster to keep constant pressure in the pipe system. A pressure sensor monitoring changes in the water consumption will signal to the speed controller to change the motor speed to adapt per- formance to the new state. The CME Booster is very easy to install. When the pipework has been installed, it is all a matter of plugging the unit into a socket, and the system is operational. The CME Booster consists of: - CME pump with integrated frequency converter - 5-way valve - expansion tank - pressure gauge - pressure sensor (0-10 bar) Features - Constant pressure, integrated speed control - compact - robust, stainless steel - easy installation - dry run protection Thermal protection: CME Booster pumps require no external motor protection. The MGE motor incorporates thermal protection against slow overloading and blocking (IEC 34.11: TP 211). Technical Data: Speed for pump data: 3480 rpm Rated flow: 3.7 m³/h Rated head: 59.8 m Shaft seal: AVBE Approvals and markings: CE Start pressure: Integrated Frequency converter Materials: Pump housing: Stainless steel Pump housing: DIN W.-Nr. 1.4401 Pump housing: AISI 316 Impeller: Stainless steel Impeller: DIN W.-Nr. 1.4401 Impeller: AISI 316 Rubber: EPDM Installation: Maximum ambient temperature: 55°C Flange standard: Whitworth thread Rp Pump inlet: Rp 1-1/4'' Pump outlet: Rp 3/4'' Electrical data: Maximum current consumption: 9.10-7.60 A Rated power - P2: 1.5 kW Mains frequency: 60 Hz Rated voltage: 1 x 200-240 V Rated speed: 360-4000 rpm Enclosure class (IEC 34-5): IP55 Insulation class (IEC 85): F Type of cable plug: SCHUKO Mains cable: 1.5 m Tank volume: 2 l Others: Net weight: 19.4 kg Gross weight: 27.8 kg