Protegra CS PRO RO EDI 125 Reverse Osmosis System with Ionpure EDI CONSISTENTLY HIGH WATER QUALITY The Protegra CS® Pro RO EDI system is a high-performance purification solution for deionised water applications. Featuring industry-leading reverse osmosis technology and a high-performance Ionpure® CEDI cell, the system maintains water quality at the required standard. The system is ideal for a range of laboratory and industrial applications with a typical water quality of > 0.07µS/cm and a flow rate up to 125 l/h at 15°C. Product features and benefits: - Energy efficient and high performance reverse osmosis (RO) modules effectively achieve high inorganic retention and permeate production. This reduces energy demand and minimizes water waste. - Electro-deionization removes the residual salt content from the water without exhausting itself. - Automatic rinsing of entire system before going into stand-by mode reduces build-up of ions in the RO membranes - increasing the lifespan. - Microprocessor control provides automatic operation with continuous monitoring of all important parameters. - The limits for conductivity and flow rates of pure water can be set individually. - Removable front and side panels for easy service access. - The system is low maintenance. Production of pure water: Reverse osmosis - Feed water solenoid valve - Pressure regulator - Conductivity sensor for feed water (cell constant c=1.0) - Filter with activated carbon - Pressure switch for feed water - Stainless steel pump (1.4401/1.4301) - Pressure sensor for operating pressure - 1 Reverse osmosis module made of polyamide/polysulfone with pressure tubes made of stainless steel (1.4571) and end caps made of polypropylene (PP) - Regulator for concentrate flow to drain and return - Three flow sensors for pure water, concentrate and brine - Conductivity sensor for permeate (cell constant c=0.2) - Quality-dependent permeate distribution valve Continuous Electrodeionization (CEDI): - Ionpure CEDI module for up to 125 l/h - Conductivity sensor for pure water, temperature compensated (cell constant c=1,0) - Temperature sensor New 7'' control touch-panel: - Mounted on the front of the system - System status displayed - Conductivity of feed water, permeate and pure water - Volume flow rate of pure water, concentrate and brine - Alarm indicator - Timeline for concentrate discharge to drain and module rinsing - Multilingual (German, English) - USB interface for data transfer - microSD-Port (Data recording and firmware updates) Supplied with: - Operating manual - Electrical circuit diagram - Active carbon fine filter cartridge - key for filter cartridge - Set of 4 hoses (3m ea), 3/4'' - Power cable NOT included Optional: - Water Guard R3/4'' f/m (W2T828181) - LED-Signal light tower (Red-yellow-green) (W3T307039) - Modbus TCP Gateway for continuous data transfer to a BMS (Building management system) or PC/ laptop (W3T570885) - CO2 Membrane degassing (W3T262426) - Complete DQ/IQ/OQ/PQ documentation and validation of the system on site available upon request. Feed water specifications: Softened or hardness stabilized Flow rate: 180 - 260 l/h Pressure: 2,5 - 6,0 bar Temperature: 5 - 30°C Conductivity: < 1400 µS/cm Colloid index (SDI): < 3 TDS: 700 mg/l CO2: < 10 mg/l SiO2: < 10 mg/l TOC: < 1500ppb pH: 3-9 Total iron: < 0.1 mg/l Free chlorine: < 0.1 mg/l Manganese: <0,05 mg/l Performance specifications: Flow rate at 15 °C: 125 l/h Conductivity: < 0.1 µS/ml Typical conductivity: < 0.07 µS/ml Recovery rate up to: 50-80% Technical data: Mains input: 400V 3/N/PE 50-60 Hz (Power cord not included in delivery) Power consumption: 1,0 kW/h Ambient temperature: 1 - 30°C Humidity: no condensation Fuse protection: max. 16 A The power connection is made via supply terminals inside the Protegra and must be provided by the customer. Hydraulic ports: Feed water: G3/4'' MPT Product water: G3/4'' MPT Concentrate: G3/4'' MPT Brine: G3/4'' MPT Dimensions and weight: Height: 1795 mm (on wheels) Height w/ optional lamp: 1960 mm Width: 650 mm Depth: 545 mm Weight: approx. 165 kg Please note: The unit accepts a feed water salt concentration of 700 mg/l, equivalent to a conductivity of 1400 µS/cm at 15 °C. The feed water specifications are guidelines. The pure water specifications can only be guaranteed if a feed water analysis including levels of silicate and CO2 of the installation site and all other relevant parameters have been analyzed. Protegra CS PRO RO EDI 125 Reverse Osmosis System with Ionpure EDI CONSISTENTLY HIGH WATER QUALITY The Protegra CS® Pro RO EDI system is a high-performance purification solution for deionised water applications. Featuring industry-leading reverse osmosis technology and a high-performance Ionpure® CEDI cell, the system maintains water quality at the required standard. The system is ideal for a range of laboratory and industrial applications with a typical water quality of > 0.07µS/cm and a flow rate up to 125 l/h at 15°C. Product features and benefits: - Energy efficient and high performance reverse osmosis (RO) modules effectively achieve high inorganic retention and permeate production. This reduces energy demand and minimizes water waste. - Electro-deionization removes the residual salt content from the water without exhausting itself. - Automatic rinsing of entire system before going into stand-by mode reduces build-up of ions in the RO membranes - increasing the lifespan. - Microprocessor control provides automatic operation with continuous monitoring of all important parameters. - The limits for conductivity and flow rates of pure water can be set individually. - Removable front and side panels for easy service access. - The system is low maintenance. Production of pure water: Reverse osmosis - Feed water solenoid valve - Pressure regulator - Conductivity sensor for feed water (cell constant c=1.0) - Filter with activated carbon - Pressure switch for feed water - Stainless steel pump (1.4401/1.4301) - Pressure sensor for operating pressure - 1 Reverse osmosis module made of polyamide/polysulfone with pressure tubes made of stainless steel (1.4571) and end caps made of polypropylene (PP) - Regulator for concentrate flow to drain and return - Three flow sensors for pure water, concentrate and brine - Conductivity sensor for permeate (cell constant c=0.2) - Quality-dependent permeate distribution valve Continuous Electrodeionization (CEDI): - Ionpure CEDI module for up to 125 l/h - Conductivity sensor for pure water, temperature compensated (cell constant c=1,0) - Temperature sensor New 7'' control touch-panel: - Mounted on the front of the system - System status displayed - Conductivity of feed water, permeate and pure water - Volume flow rate of pure water, concentrate and brine - Alarm indicator - Timeline for concentrate discharge to drain and module rinsing - Multilingual (German, English) - USB interface for data transfer - microSD-Port (Data recording and firmware updates) Supplied with: - Operating manual - Electrical circuit diagram - Active carbon fine filter cartridge - key for filter cartridge - Set of 4 hoses (3m ea), 3/4'' - Power cable NOT included Optional: - Water Guard R3/4'' f/m (W2T828181) - LED-Signal light tower (Red-yellow-green) (W3T307039) - Modbus TCP Gateway for continuous data transfer to a BMS (Building management system) or PC/ laptop (W3T570885) - CO2 Membrane degassing (W3T262426) - Complete DQ/IQ/OQ/PQ documentation and validation of the system on site available upon request. Feed water specifications: Softened or hardness stabilized Flow rate: 180 - 260 l/h Pressure: 2,5 - 6,0 bar Temperature: 5 - 30°C Conductivity: < 1400 µS/cm Colloid index (SDI): < 3 TDS: 700 mg/l CO2: < 10 mg/l SiO2: < 10 mg/l TOC: < 1500ppb pH: 3-9 Total iron: < 0.1 mg/l Free chlorine: < 0.1 mg/l Manganese: <0,05 mg/l Performance specifications: Flow rate at 15 °C: 125 l/h Conductivity: < 0.1 µS/ml Typical conductivity: < 0.07 µS/ml Recovery rate up to: 50-80% Technical data: Mains input: 400V 3/N/PE 50-60 Hz (Power cord not included in delivery) Power consumption: 1,0 kW/h Ambient temperature: 1 - 30°C Humidity: no condensation Fuse protection: max. 16 A The power connection is made via supply terminals inside the Protegra and must be provided by the customer. Hydraulic ports: Feed water: G3/4'' MPT Product water: G3/4'' MPT Concentrate: G3/4'' MPT Brine: G3/4'' MPT Dimensions and weight: Height: 1795 mm (on wheels) Height w/ optional lamp: 1960 mm Width: 650 mm Depth: 545 mm Weight: approx. 165 kg Please note: The unit accepts a feed water salt concentration of 700 mg/l, equivalent to a conductivity of 1400 µS/cm at 15 °C. The feed water specifications are guidelines. The pure water specifications can only be guaranteed if a feed water analysis including levels of silicate and CO2 of the installation site and all other relevant parameters have been analyzed.