Bioprocessing, diverse

0010007553, Omnilab

The HABITAT photo cell control unit package of the HABITAT research bioreactor is used to monitor and control the bioprocess. With the help of the LED panels included in the scope of delivery, the system can be used as a photobioreactor, for example for algae cultivation. The adjustment of the light intensity enables the simulation of the day-night rhythm. Furthermore,, the package includes the control unit with all connection options for the gas supply, liquid addition, sensors and temperature control as well as a tablet for simple and clear operation of the bioreactor. Control and monitoring The bioprocess and all associated test parameters can be easily controlled and monitored via the tablet attached to the control unit and with the help of the intuitive and easy-to-use software. Depending on the type of cultivation, you can choose between the operating modes batch, fed-batch and perfusion/continuous. The new Chaotic Mixing function ensures faster and more effective mixing when required. The 10.4-inch tablet allows direct access to all actuators directly on the main screen. A clear calibration management, a diagram overview and the complete documentation of the process round off the operation. A software version that meets FDA CFR Part 11 requirements is available as an option. Gas supply Built in mass flow controllers for 4 separate gas lines (for N2, O2, air and CO2) ensure precise, individually adjustable gassing, ideally tailored to the needs of your cells. Flow rates of 0-2000 cc/min can be achieved. Liquid supply 4 integrated Watson Marlow pumps, adjustable in direction and speed, give you the variability to pump in and pump out different liquids (like acid, base, anti-foam agent, feeding solutions). Sensors HABITAT photo cell enables the measurement of the following parameters by means of sensors: • pH • DO (dissolved oxygen) • temperature • filling level • foam Temperature control The constant and precise temperature control during the cultivation is guaranteed by the heating sleeve, which is adapted to the respective vessel size. (Heating sleeve is included with the HABITAT cell vessel package). All features at a glance - compact, space-saving design, dimensions: 223 x 402 x 450 mm (WxDxH) - large tablet for clear operation (10,4 inch) - intuitive, easy-to-use software with a lot of functionalities. - 4 integrated fast-load pumps (Watson Marlow) - connectivity: USB, PC, RS232, ethernet, external signal input, external pump, single-use unit, thermostat - data storage - gas supply with 4 built-in mass flow controllers: e.g. for O2, Luft, N2, CO2 - Status LED display: direct error display by indicator light Note: Only a control tower package and the separately available vessel package make up a functional unit. The HABITAT photo cell control unit package of the HABITAT research bioreactor is used to monitor and control the bioprocess. With the help of the LED panels included in the scope of delivery, the system can be used as a photobioreactor, for example for algae cultivation. The adjustment of the light intensity enables the simulation of the day-night rhythm. Furthermore,, the package includes the control unit with all connection options for the gas supply, liquid addition, sensors and temperature control as well as a tablet for simple and clear operation of the bioreactor. Control and monitoring The bioprocess and all associated test parameters can be easily controlled and monitored via the tablet attached to the control unit and with the help of the intuitive and easy-to-use software. Depending on the type of cultivation, you can choose between the operating modes batch, fed-batch and perfusion/continuous. The new Chaotic Mixing function ensures faster and more effective mixing when required. The 10.4-inch tablet allows direct access to all actuators directly on the main screen. A clear calibration management, a diagram overview and the complete documentation of the process round off the operation. A software version that meets FDA CFR Part 11 requirements is available as an option. Gas supply Built in mass flow controllers for 4 separate gas lines (for N2, O2, air and CO2) ensure precise, individually adjustable gassing, ideally tailored to the needs of your cells. Flow rates of 0-2000 cc/min can be achieved. Liquid supply 4 integrated Watson Marlow pumps, adjustable in direction and speed, give you the variability to pump in and pump out different liquids (like acid, base, anti-foam agent, feeding solutions). Sensors HABITAT photo cell enables the measurement of the following parameters by means of sensors: • pH • DO (dissolved oxygen) • temperature • filling level • foam Temperature control The constant and precise temperature control during the cultivation is guaranteed by the heating sleeve, which is adapted to the respective vessel size. (Heating sleeve is included with the HABITAT cell vessel package). All features at a glance - compact, space-saving design, dimensions: 223 x 402 x 450 mm (WxDxH) - large tablet for clear operation (10,4 inch) - intuitive, easy-to-use software with a lot of functionalities. - 4 integrated fast-load pumps (Watson Marlow) - connectivity: USB, PC, RS232, ethernet, external signal input, external pump, single-use unit, thermostat - data storage - gas supply with 4 built-in mass flow controllers: e.g. for O2, Luft, N2, CO2 - Status LED display: direct error display by indicator light Note: Only a control tower package and the separately available vessel package make up a functional unit.

0035003694, Omnilab

Motor für Direktantrieb. Er ist ideal geeignet für 5 und 10 l Glasgefäße. Motor für Direktantrieb. Er ist ideal geeignet für 5 und 10 l Glasgefäße.

0020105972, Omnilab

Gefäßhalterung für 2 l Glasgefäße (einwandig oder doppelwandig). Das Glasgefäß hat damit stets einen stabilen und sicheren Stand. Durch flexible Griffe, die an den Seiten angebracht sind, kann es auch leicht transportiert werden. Die Maße sind so gewählt, dass Halterung und Gefäß im Autoklaven Platz finden. Gefäßhalterung für 2 l Glasgefäße (einwandig oder doppelwandig). Das Glasgefäß hat damit stets einen stabilen und sicheren Stand. Durch flexible Griffe, die an den Seiten angebracht sind, kann es auch leicht transportiert werden. Die Maße sind so gewählt, dass Halterung und Gefäß im Autoklaven Platz finden.

0010007646, Omnilab

The 1 l vessel package for the bioreactor HABITAT research contains a 1 l single-walled glass vessel for cell culture applications as well as the appropriate stirring drive. Together with the separately available control tower package (e.g. HABITAT cell) you receive all necessary components for a successful cultivation. The 1 l vessel package for the bioreactor HABITAT research contains a 1 l single-walled glass vessel for cell culture applications as well as the appropriate stirring drive. Together with the separately available control tower package (e.g. HABITAT cell) you receive all necessary components for a successful cultivation.

2145-0384, Omnilab

PP, silicone gasket. Allows insertion of 7 to 14 mm Ø probes into Nalgene® 1 and 12 l culture vessels. Provides a seal between the environment and the interior of the culture vessel to prevent contamination when a probe is in place. Autoclavable. PP, silicone gasket. Allows insertion of 7 to 14 mm Ø probes into Nalgene® 1 and 12 l culture vessels. Provides a seal between the environment and the interior of the culture vessel to prevent contamination when a probe is in place. Autoclavable.

0020106411, Omnilab

Autoklavierbares, doppelwandiges Glasgefäß (Borosilikatglas 3.3) mit einem Arbeitsvolumen von 300 ml bis 1 l. Das Totalvolumen beträgt 1,6 l. Autoklavierbares, doppelwandiges Glasgefäß (Borosilikatglas 3.3) mit einem Arbeitsvolumen von 300 ml bis 1 l. Das Totalvolumen beträgt 1,6 l.

0035003757, Omnilab

Motor für Direktantrieb. Die kleine Bauart ermöglicht ein komfortables Arbeiten und ist ideal geeignet für 0,5, 1, und 2 l Glasgefäße. Motor für Direktantrieb. Die kleine Bauart ermöglicht ein komfortables Arbeiten und ist ideal geeignet für 0,5, 1, und 2 l Glasgefäße.

0020117542, Omnilab

0020110119, Omnilab

Manifold is a gas distributor that enables Screening System reactions under uniform gas flow. It is recommended for air sensitive reactions or liquid/ gas reactions. With the additional purchase of a cap package, manifold is compatible with undivided cell and divided cell reactions. The accessory has one gas inlet and a 12-port outlet. The package includes a tube ( 25 foot, 4 mm outer diameter). The tube length can be cut and customized for each port. For safety reasons, only unpressurized inert-gases or air is allowed through the manifold. At least one port should be kept open. Manifold is a gas distributor that enables Screening System reactions under uniform gas flow. It is recommended for air sensitive reactions or liquid/ gas reactions. With the additional purchase of a cap package, manifold is compatible with undivided cell and divided cell reactions. The accessory has one gas inlet and a 12-port outlet. The package includes a tube ( 25 foot, 4 mm outer diameter). The tube length can be cut and customized for each port. For safety reasons, only unpressurized inert-gases or air is allowed through the manifold. At least one port should be kept open.

0020106409, Omnilab

Autoklavierbares, doppelwandiges Glasgefäß (Borosilikatglas 3.3) mit einem Arbeitsvolumen von 120 ml bis 500 ml. Das Totalvolumen beträgt 0,8 l. Autoklavierbares, doppelwandiges Glasgefäß (Borosilikatglas 3.3) mit einem Arbeitsvolumen von 120 ml bis 500 ml. Das Totalvolumen beträgt 0,8 l.

0010007563, Omnilab

The HABITAT photo ferment control unit package of the HABITAT research bioreactor is used to monitor and control the bioprocess. With the help of the LED panels included in the scope of delivery, the system can be used as a photobioreactor, for example for algae cultivation. The adjustment of the light intensity enables the simulation of the day-night rhythm. Furthermore,, the package includes the control unit with all connection options for the gas supply, liquid addition, sensors and temperature control as well as a tablet for simple and clear operation of the bioreactor. Control and monitoring The bioprocess and all associated test parameters can be easily controlled and monitored via the tablet attached to the control unit and with the help of the intuitive and easy-to-use software. Depending on the type of cultivation, you can choose between the operating modes batch, fed-batch and perfusion/continuous. The new Chaotic Mixing function ensures faster and more effective mixing when required. The 10.4-inch tablet allows direct access to all actuators directly on the main screen. A clear calibration management, a diagram overview and the complete documentation of the process round off the operation. A software version that meets FDA CFR Part 11 requirements is available as an option. Gas supply Built in mass flow controllers for 4 separate gas lines (for N2, O2, air and CO2) ensure precise, individually adjustable gassing, ideally tailored to the needs of your cells. Flow rates of 0,1-20000 cc/min can be achieved. Liquid supply 4 integrated Watson Marlow pumps, adjustable in direction and speed, give you the variability to pump in and pump out different liquids (like acid, base, anti-foam agent, feeding solutions). Sensors HABITAT photo ferment enables the measurement of the following parameters by means of sensors: • pH • DO (dissolved oxygen) • temperature • filling level • foam Temperature control Constant and precise temperature control during cultivation is guaranteed by our circulation thermostats, such as the HRC 2 basic or control, which heat and cool. All features at a glance - compact, space-saving design, dimensions: 223 x 402 x 450 mm (WxDxH) - large tablet for clear operation (10,4 inch) - intuitive, easy-to-use software with a lot of functionalities. - 4 integrated fast-load pumps (Watson Marlow) - connectivity: USB, PC, RS232, ethernet, external signal input, external pump, single-use unit, thermostat - data storage - gas supply with 4 built-in mass flow controllers: e.g. for O2, Luft, N2, CO2 - Status LED display: direct error display by indicator light Note: Only a control tower package and the separately available vessel package make up a functional unit. The HABITAT photo ferment control unit package of the HABITAT research bioreactor is used to monitor and control the bioprocess. With the help of the LED panels included in the scope of delivery, the system can be used as a photobioreactor, for example for algae cultivation. The adjustment of the light intensity enables the simulation of the day-night rhythm. Furthermore,, the package includes the control unit with all connection options for the gas supply, liquid addition, sensors and temperature control as well as a tablet for simple and clear operation of the bioreactor. Control and monitoring The bioprocess and all associated test parameters can be easily controlled and monitored via the tablet attached to the control unit and with the help of the intuitive and easy-to-use software. Depending on the type of cultivation, you can choose between the operating modes batch, fed-batch and perfusion/continuous. The new Chaotic Mixing function ensures faster and more effective mixing when required. The 10.4-inch tablet allows direct access to all actuators directly on the main screen. A clear calibration management, a diagram overview and the complete documentation of the process round off the operation. A software version that meets FDA CFR Part 11 requirements is available as an option. Gas supply Built in mass flow controllers for 4 separate gas lines (for N2, O2, air and CO2) ensure precise, individually adjustable gassing, ideally tailored to the needs of your cells. Flow rates of 0,1-20000 cc/min can be achieved. Liquid supply 4 integrated Watson Marlow pumps, adjustable in direction and speed, give you the variability to pump in and pump out different liquids (like acid, base, anti-foam agent, feeding solutions). Sensors HABITAT photo ferment enables the measurement of the following parameters by means of sensors: • pH • DO (dissolved oxygen) • temperature • filling level • foam Temperature control Constant and precise temperature control during cultivation is guaranteed by our circulation thermostats, such as the HRC 2 basic or control, which heat and cool. All features at a glance - compact, space-saving design, dimensions: 223 x 402 x 450 mm (WxDxH) - large tablet for clear operation (10,4 inch) - intuitive, easy-to-use software with a lot of functionalities. - 4 integrated fast-load pumps (Watson Marlow) - connectivity: USB, PC, RS232, ethernet, external signal input, external pump, single-use unit, thermostat - data storage - gas supply with 4 built-in mass flow controllers: e.g. for O2, Luft, N2, CO2 - Status LED display: direct error display by indicator light Note: Only a control tower package and the separately available vessel package make up a functional unit.

0020106414, Omnilab

Autoklavierbares, doppelwandiges Glasgefäß (Borosilikatglas 3.3) mit einem Arbeitsvolumen von 1,2 l bis 10 l. Das Totalvolumen beträgt 12,9 l. Autoklavierbares, doppelwandiges Glasgefäß (Borosilikatglas 3.3) mit einem Arbeitsvolumen von 1,2 l bis 10 l. Das Totalvolumen beträgt 12,9 l.