Deliver to
United Kingdom
The Heratherm™ series provide bench-top models with 60, 100 or 180 l as well as floor models with 400 or 750 l chamber volume and 3 different fittings, each optionally with gravity- or mechanical convection. - Very high energy efficiency, environmentally friendly materials (reduced use of formaldehyde), reduced heat emission. - Programmable timer. - Small footprint. - Flexible shelf system doubles the number of shelves and therefore the footprint. - Very good spatial and temporal temperature stability. - Automatic visual and acoustic over-temperature alarm. - Very low temperatures at outer wall. - Easy to read vacuum fluorescent display. - Intuitive user interface for setting temperature. - Easy cleaning due to edgeless fabrication. Heratherm™ General Protocol: Perfect for routine daily work from 50 to 250 °C. Chambers made from corrosion-resistant st. steel with rounded corners. Timer, mechanical exhaust vent as well as 2 shelves are incl. as standard. Heratherm™ Advanced Protocol: For a greater flexibility and accuracy of temperature values. With V2A st. steel interior, works up to 330 °C at highly stable temperatures. Digital timer for daily or weekly ON / OFF cycles. Up to 10 cycles can be stored and combined as ramps. Fan speed and air valve can be integrated into ramp programming. Selectable quick start function allows for extremely fast heating. Heratherm™ Advanced Protocol Security: Additional to equipment of the Advanced Protocol series: under-temperature alarm for improved sample protection. With door lock and door alarm to prevent disruption and allow for safe cultures for a long time. The oven desactivates when the samples are dry, saving energy (requieres optional sample temperature sensor). The V2A inner chamber can be supplemented by a st. steel outer housing for pharmaceutical and clinical applications. The Heratherm™ series provide bench-top models with 60, 100 or 180 l as well as floor models with 400 or 750 l chamber volume and 3 different fittings, each optionally with gravity- or mechanical convection. - Very high energy efficiency, environmentally friendly materials (reduced use of formaldehyde), reduced heat emission. - Programmable timer. - Small footprint. - Flexible shelf system doubles the number of shelves and therefore the footprint. - Very good spatial and temporal temperature stability. - Automatic visual and acoustic over-temperature alarm. - Very low temperatures at outer wall. - Easy to read vacuum fluorescent display. - Intuitive user interface for setting temperature. - Easy cleaning due to edgeless fabrication. Heratherm™ General Protocol: Perfect for routine daily work from 50 to 250 °C. Chambers made from corrosion-resistant st. steel with rounded corners. Timer, mechanical exhaust vent as well as 2 shelves are incl. as standard. Heratherm™ Advanced Protocol: For a greater flexibility and accuracy of temperature values. With V2A st. steel interior, works up to 330 °C at highly stable temperatures. Digital timer for daily or weekly ON / OFF cycles. Up to 10 cycles can be stored and combined as ramps. Fan speed and air valve can be integrated into ramp programming. Selectable quick start function allows for extremely fast heating. Heratherm™ Advanced Protocol Security: Additional to equipment of the Advanced Protocol series: under-temperature alarm for improved sample protection. With door lock and door alarm to prevent disruption and allow for safe cultures for a long time. The oven desactivates when the samples are dry, saving energy (requieres optional sample temperature sensor). The V2A inner chamber can be supplemented by a st. steel outer housing for pharmaceutical and clinical applications.
Product Detail
Models UN / UNplus with natural convection. Models UF / UFplus with forced air circulation. The all-round genius among the heating ovens corner covers a multicude of applications, ideally at temperature above + 50 °C. Fresh air is preheated in a pre-heating chamber to avoid temperature deviations. AtmoCONTROL - control and logging software For direct setting parameters as well as process time. Fast and easy programming of complex processes via AtmoCONTROL by means of the mouse or touchpad on the notebook. Programme functions SingleDISPLAY and TwinDISPLAY: - Reading out, managing and organising the data logger. - Saving the log memory in various formats. - Online monitoring of up to 32 connected appliances. - Optical alarms when the alarm limits individually set at the ControlCOCKPIT are exceeded. - Automatic alarm to one or several e-mail addresses. Medical device certification: Memmert universal ovens UNm / UNmplus / UFm / UFmplus are a Class I medical device in accordance with EU directive 93/42/EWG. In accordance with the intended use Memmert heating oven Um may be used for heating fango, silivate and APS packs for physical therapy and keeping them warm. NULL Models UN / UNplus with natural convection. Models UF / UFplus with forced air circulation. The all-round genius among the heating ovens corner covers a multicude of applications, ideally at temperature above + 50 °C. Fresh air is preheated in a pre-heating chamber to avoid temperature deviations. AtmoCONTROL - control and logging software For direct setting parameters as well as process time. Fast and easy programming of complex processes via AtmoCONTROL by means of the mouse or touchpad on the notebook. Programme functions SingleDISPLAY and TwinDISPLAY: - Reading out, managing and organising the data logger. - Saving the log memory in various formats. - Online monitoring of up to 32 connected appliances. - Optical alarms when the alarm limits individually set at the ControlCOCKPIT are exceeded. - Automatic alarm to one or several e-mail addresses. Medical device certification: Memmert universal ovens UNm / UNmplus / UFm / UFmplus are a Class I medical device in accordance with EU directive 93/42/EWG. In accordance with the intended use Memmert heating oven Um may be used for heating fango, silivate and APS packs for physical therapy and keeping them warm. NULL
Product Detail
Models UN / UNplus with natural convection. Models UF / UFplus with forced air circulation. The all-round genius among the heating ovens corner covers a multicude of applications, ideally at temperature above + 50 °C. Fresh air is preheated in a pre-heating chamber to avoid temperature deviations. AtmoCONTROL - control and logging software For direct setting parameters as well as process time. Fast and easy programming of complex processes via AtmoCONTROL by means of the mouse or touchpad on the notebook. Programme functions SingleDISPLAY and TwinDISPLAY: - Reading out, managing and organising the data logger. - Saving the log memory in various formats. - Online monitoring of up to 32 connected appliances. - Optical alarms when the alarm limits individually set at the ControlCOCKPIT are exceeded. - Automatic alarm to one or several e-mail addresses. Medical device certification: Memmert universal ovens UNm / UNmplus / UFm / UFmplus are a Class I medical device in accordance with EU directive 93/42/EWG. In accordance with the intended use Memmert heating oven Um may be used for heating fango, silivate and APS packs for physical therapy and keeping them warm. NULL Models UN / UNplus with natural convection. Models UF / UFplus with forced air circulation. The all-round genius among the heating ovens corner covers a multicude of applications, ideally at temperature above + 50 °C. Fresh air is preheated in a pre-heating chamber to avoid temperature deviations. AtmoCONTROL - control and logging software For direct setting parameters as well as process time. Fast and easy programming of complex processes via AtmoCONTROL by means of the mouse or touchpad on the notebook. Programme functions SingleDISPLAY and TwinDISPLAY: - Reading out, managing and organising the data logger. - Saving the log memory in various formats. - Online monitoring of up to 32 connected appliances. - Optical alarms when the alarm limits individually set at the ControlCOCKPIT are exceeded. - Automatic alarm to one or several e-mail addresses. Medical device certification: Memmert universal ovens UNm / UNmplus / UFm / UFmplus are a Class I medical device in accordance with EU directive 93/42/EWG. In accordance with the intended use Memmert heating oven Um may be used for heating fango, silivate and APS packs for physical therapy and keeping them warm. NULL
Product Detail
Models UN / UNplus with natural convection. Models UF / UFplus with forced air circulation. The all-round genius among the heating ovens corner covers a multicude of applications, ideally at temperature above + 50 °C. Fresh air is preheated in a pre-heating chamber to avoid temperature deviations. AtmoCONTROL - control and logging software For direct setting parameters as well as process time. Fast and easy programming of complex processes via AtmoCONTROL by means of the mouse or touchpad on the notebook. Programme functions SingleDISPLAY and TwinDISPLAY: - Reading out, managing and organising the data logger. - Saving the log memory in various formats. - Online monitoring of up to 32 connected appliances. - Optical alarms when the alarm limits individually set at the ControlCOCKPIT are exceeded. - Automatic alarm to one or several e-mail addresses. Medical device certification: Memmert universal ovens UNm / UNmplus / UFm / UFmplus are a Class I medical device in accordance with EU directive 93/42/EWG. In accordance with the intended use Memmert heating oven Um may be used for heating fango, silivate and APS packs for physical therapy and keeping them warm. NULL Models UN / UNplus with natural convection. Models UF / UFplus with forced air circulation. The all-round genius among the heating ovens corner covers a multicude of applications, ideally at temperature above + 50 °C. Fresh air is preheated in a pre-heating chamber to avoid temperature deviations. AtmoCONTROL - control and logging software For direct setting parameters as well as process time. Fast and easy programming of complex processes via AtmoCONTROL by means of the mouse or touchpad on the notebook. Programme functions SingleDISPLAY and TwinDISPLAY: - Reading out, managing and organising the data logger. - Saving the log memory in various formats. - Online monitoring of up to 32 connected appliances. - Optical alarms when the alarm limits individually set at the ControlCOCKPIT are exceeded. - Automatic alarm to one or several e-mail addresses. Medical device certification: Memmert universal ovens UNm / UNmplus / UFm / UFmplus are a Class I medical device in accordance with EU directive 93/42/EWG. In accordance with the intended use Memmert heating oven Um may be used for heating fango, silivate and APS packs for physical therapy and keeping them warm. NULL
Product Detail
The Heratherm™ series provide bench-top models with 60, 100 or 180 l as well as floor models with 400 or 750 l chamber volume and 3 different fittings, each optionally with gravity- or mechanical convection. - Very high energy efficiency, environmentally friendly materials (reduced use of formaldehyde), reduced heat emission. - Programmable timer. - Small footprint. - Flexible shelf system doubles the number of shelves and therefore the footprint. - Very good spatial and temporal temperature stability. - Automatic visual and acoustic over-temperature alarm. - Very low temperatures at outer wall. - Easy to read vacuum fluorescent display. - Intuitive user interface for setting temperature. - Easy cleaning due to edgeless fabrication. Heratherm™ General Protocol: Perfect for routine daily work from 50 to 250 °C. Chambers made from corrosion-resistant st. steel with rounded corners. Timer, mechanical exhaust vent as well as 2 shelves are incl. as standard. Heratherm™ Advanced Protocol: For a greater flexibility and accuracy of temperature values. With V2A st. steel interior, works up to 330 °C at highly stable temperatures. Digital timer for daily or weekly ON / OFF cycles. Up to 10 cycles can be stored and combined as ramps. Fan speed and air valve can be integrated into ramp programming. Selectable quick start function allows for extremely fast heating. Heratherm™ Advanced Protocol Security: Additional to equipment of the Advanced Protocol series: under-temperature alarm for improved sample protection. With door lock and door alarm to prevent disruption and allow for safe cultures for a long time. The oven desactivates when the samples are dry, saving energy (requieres optional sample temperature sensor). The V2A inner chamber can be supplemented by a st. steel outer housing for pharmaceutical and clinical applications. The Heratherm™ series provide bench-top models with 60, 100 or 180 l as well as floor models with 400 or 750 l chamber volume and 3 different fittings, each optionally with gravity- or mechanical convection. - Very high energy efficiency, environmentally friendly materials (reduced use of formaldehyde), reduced heat emission. - Programmable timer. - Small footprint. - Flexible shelf system doubles the number of shelves and therefore the footprint. - Very good spatial and temporal temperature stability. - Automatic visual and acoustic over-temperature alarm. - Very low temperatures at outer wall. - Easy to read vacuum fluorescent display. - Intuitive user interface for setting temperature. - Easy cleaning due to edgeless fabrication. Heratherm™ General Protocol: Perfect for routine daily work from 50 to 250 °C. Chambers made from corrosion-resistant st. steel with rounded corners. Timer, mechanical exhaust vent as well as 2 shelves are incl. as standard. Heratherm™ Advanced Protocol: For a greater flexibility and accuracy of temperature values. With V2A st. steel interior, works up to 330 °C at highly stable temperatures. Digital timer for daily or weekly ON / OFF cycles. Up to 10 cycles can be stored and combined as ramps. Fan speed and air valve can be integrated into ramp programming. Selectable quick start function allows for extremely fast heating. Heratherm™ Advanced Protocol Security: Additional to equipment of the Advanced Protocol series: under-temperature alarm for improved sample protection. With door lock and door alarm to prevent disruption and allow for safe cultures for a long time. The oven desactivates when the samples are dry, saving energy (requieres optional sample temperature sensor). The V2A inner chamber can be supplemented by a st. steel outer housing for pharmaceutical and clinical applications.
Product Detail
Models UN / UNplus with natural convection. Models UF / UFplus with forced air circulation. The all-round genius among the heating ovens corner covers a multicude of applications, ideally at temperature above + 50 °C. Fresh air is preheated in a pre-heating chamber to avoid temperature deviations. AtmoCONTROL - control and logging software For direct setting parameters as well as process time. Fast and easy programming of complex processes via AtmoCONTROL by means of the mouse or touchpad on the notebook. Programme functions SingleDISPLAY and TwinDISPLAY: - Reading out, managing and organising the data logger. - Saving the log memory in various formats. - Online monitoring of up to 32 connected appliances. - Optical alarms when the alarm limits individually set at the ControlCOCKPIT are exceeded. - Automatic alarm to one or several e-mail addresses. Medical device certification: Memmert universal ovens UNm / UNmplus / UFm / UFmplus are a Class I medical device in accordance with EU directive 93/42/EWG. In accordance with the intended use Memmert heating oven Um may be used for heating fango, silivate and APS packs for physical therapy and keeping them warm. NULL Models UN / UNplus with natural convection. Models UF / UFplus with forced air circulation. The all-round genius among the heating ovens corner covers a multicude of applications, ideally at temperature above + 50 °C. Fresh air is preheated in a pre-heating chamber to avoid temperature deviations. AtmoCONTROL - control and logging software For direct setting parameters as well as process time. Fast and easy programming of complex processes via AtmoCONTROL by means of the mouse or touchpad on the notebook. Programme functions SingleDISPLAY and TwinDISPLAY: - Reading out, managing and organising the data logger. - Saving the log memory in various formats. - Online monitoring of up to 32 connected appliances. - Optical alarms when the alarm limits individually set at the ControlCOCKPIT are exceeded. - Automatic alarm to one or several e-mail addresses. Medical device certification: Memmert universal ovens UNm / UNmplus / UFm / UFmplus are a Class I medical device in accordance with EU directive 93/42/EWG. In accordance with the intended use Memmert heating oven Um may be used for heating fango, silivate and APS packs for physical therapy and keeping them warm. NULL
Product Detail
Models UN / UNplus with natural convection. Models UF / UFplus with forced air circulation. The all-round genius among the heating ovens corner covers a multicude of applications, ideally at temperature above + 50 °C. Fresh air is preheated in a pre-heating chamber to avoid temperature deviations. AtmoCONTROL - control and logging software For direct setting parameters as well as process time. Fast and easy programming of complex processes via AtmoCONTROL by means of the mouse or touchpad on the notebook. Programme functions SingleDISPLAY and TwinDISPLAY: - Reading out, managing and organising the data logger. - Saving the log memory in various formats. - Online monitoring of up to 32 connected appliances. - Optical alarms when the alarm limits individually set at the ControlCOCKPIT are exceeded. - Automatic alarm to one or several e-mail addresses. Medical device certification: Memmert universal ovens UNm / UNmplus / UFm / UFmplus are a Class I medical device in accordance with EU directive 93/42/EWG. In accordance with the intended use Memmert heating oven Um may be used for heating fango, silivate and APS packs for physical therapy and keeping them warm. NULL Models UN / UNplus with natural convection. Models UF / UFplus with forced air circulation. The all-round genius among the heating ovens corner covers a multicude of applications, ideally at temperature above + 50 °C. Fresh air is preheated in a pre-heating chamber to avoid temperature deviations. AtmoCONTROL - control and logging software For direct setting parameters as well as process time. Fast and easy programming of complex processes via AtmoCONTROL by means of the mouse or touchpad on the notebook. Programme functions SingleDISPLAY and TwinDISPLAY: - Reading out, managing and organising the data logger. - Saving the log memory in various formats. - Online monitoring of up to 32 connected appliances. - Optical alarms when the alarm limits individually set at the ControlCOCKPIT are exceeded. - Automatic alarm to one or several e-mail addresses. Medical device certification: Memmert universal ovens UNm / UNmplus / UFm / UFmplus are a Class I medical device in accordance with EU directive 93/42/EWG. In accordance with the intended use Memmert heating oven Um may be used for heating fango, silivate and APS packs for physical therapy and keeping them warm. NULL
Product Detail
With their maximum working temperature of up to 300 °C and air circulation, the ovens achieve a perfect temperature uniformity which is much better than in ovens of most competitors. They can be used for various applications such as e.g. drying, sterilizing or warm storing. Ample warehousing of standard models provides for short delivery times. - Tmax 300 °C - Working temperature range: + 5 °C above room temperature up to 300 °C - Ovens TR 30 - TR 240 designed as tabletop models - Ovens TR 450 and TR 1050 designed as floor standing models - Horizontal, air circulation results in temperature uniformity better than +/- 5 °C - Stainless steel chamber, alloy 304 (AISI)/(DIN material no. 1.4301), rust-resistant and easy to clean - Only fiber materials are used which are not classified as carcinogenic according to TRGS 905, class 1 or 20With their max. working temperature of up to 300 °C and forced air circulation, the ovens achieve a very good temperature uniformity. They can be used for various applications such as e. g. drying, sterilising or warm storing. - Horizontal, forced air circulation results in temperature uniformity better than ÄT 8 K. - St. steel chamber, alloy 304 (AISI) / (DIN material no. 1.4301), rust-resistant and easy to clean. - Large handle to open and close the door. - Charging in multiple layers possible using removeable grids. - Infinitely adjustable exhaust at the rear wall with operation from the front. - PID microprocessor control with self-diagnosis system. - Solid state relays provide for low noise operation. - Models TR 60 to TR 420 designed as tabletop models. - Models TR 450 to TR 1050 designed as floor standing models. - Models TR 60 to TR 450 with large, wide-opening swing door, hinged on the right with quick release. - Models TR 800 and TR 1050 with double swing door with quick release and equipped transport rollers. Standard functionalities Controller R 7: - 1 program. - 1 segment. - Max. 1 control zone. - Programme entry in steps of 1°C resp. 1 min. Controller B 510: - 5 programs / 4 steps - Up to 2 settable functions - Calibration option (10 base points) - Touchpanel - NTLog (Real-time clock) - USB interface - Languages (DE/EN/FR/IT/ES/RU/DK/NL/PL/PT/SE/CZ/HU/TR/RO/NO/EE/FI/HR/LV/LT/SK/SI/CN) Controller C 450: - 10 programmes. - 20 segments. - Maximum 1 control zone. - Real-time clock. - Graphic color display. - Status messages in clear text. - Start time configurable (e. g. to use night power rates). - kWh meter. - Operating hour counter. - Auto tune. With their maximum working temperature of up to 300 °C and air circulation, the ovens achieve a perfect temperature uniformity which is much better than in ovens of most competitors. They can be used for various applications such as e.g. drying, sterilizing or warm storing. Ample warehousing of standard models provides for short delivery times. - Tmax 300 °C - Working temperature range: + 5 °C above room temperature up to 300 °C - Ovens TR 30 - TR 240 designed as tabletop models - Ovens TR 450 and TR 1050 designed as floor standing models - Horizontal, air circulation results in temperature uniformity better than +/- 5 °C - Stainless steel chamber, alloy 304 (AISI)/(DIN material no. 1.4301), rust-resistant and easy to clean - Only fiber materials are used which are not classified as carcinogenic according to TRGS 905, class 1 or 20With their max. working temperature of up to 300 °C and forced air circulation, the ovens achieve a very good temperature uniformity. They can be used for various applications such as e. g. drying, sterilising or warm storing. - Horizontal, forced air circulation results in temperature uniformity better than ÄT 8 K. - St. steel chamber, alloy 304 (AISI) / (DIN material no. 1.4301), rust-resistant and easy to clean. - Large handle to open and close the door. - Charging in multiple layers possible using removeable grids. - Infinitely adjustable exhaust at the rear wall with operation from the front. - PID microprocessor control with self-diagnosis system. - Solid state relays provide for low noise operation. - Models TR 60 to TR 420 designed as tabletop models. - Models TR 450 to TR 1050 designed as floor standing models. - Models TR 60 to TR 450 with large, wide-opening swing door, hinged on the right with quick release. - Models TR 800 and TR 1050 with double swing door with quick release and equipped transport rollers. Standard functionalities Controller R 7: - 1 program. - 1 segment. - Max. 1 control zone. - Programme entry in steps of 1°C resp. 1 min. Controller B 510: - 5 programs / 4 steps - Up to 2 settable functions - Calibration option (10 base points) - Touchpanel - NTLog (Real-time clock) - USB interface - Languages (DE/EN/FR/IT/ES/RU/DK/NL/PL/PT/SE/CZ/HU/TR/RO/NO/EE/FI/HR/LV/LT/SK/SI/CN) Controller C 450: - 10 programmes. - 20 segments. - Maximum 1 control zone. - Real-time clock. - Graphic color display. - Status messages in clear text. - Start time configurable (e. g. to use night power rates). - kWh meter. - Operating hour counter. - Auto tune.
Product Detail
The Heratherm™ series provide bench-top models with 60, 100 or 180 l as well as floor models with 400 or 750 l chamber volume and 3 different fittings, each optionally with gravity- or mechanical convection. - Very high energy efficiency, environmentally friendly materials (reduced use of formaldehyde), reduced heat emission. - Programmable timer. - Small footprint. - Flexible shelf system doubles the number of shelves and therefore the footprint. - Very good spatial and temporal temperature stability. - Automatic visual and acoustic over-temperature alarm. - Very low temperatures at outer wall. - Easy to read vacuum fluorescent display. - Intuitive user interface for setting temperature. - Easy cleaning due to edgeless fabrication. Heratherm™ General Protocol: Perfect for routine daily work from 50 to 250 °C. Chambers made from corrosion-resistant st. steel with rounded corners. Timer, mechanical exhaust vent as well as 2 shelves are incl. as standard. Heratherm™ Advanced Protocol: For a greater flexibility and accuracy of temperature values. With V2A st. steel interior, works up to 330 °C at highly stable temperatures. Digital timer for daily or weekly ON / OFF cycles. Up to 10 cycles can be stored and combined as ramps. Fan speed and air valve can be integrated into ramp programming. Selectable quick start function allows for extremely fast heating. Heratherm™ Advanced Protocol Security: Additional to equipment of the Advanced Protocol series: under-temperature alarm for improved sample protection. With door lock and door alarm to prevent disruption and allow for safe cultures for a long time. The oven desactivates when the samples are dry, saving energy (requieres optional sample temperature sensor). The V2A inner chamber can be supplemented by a st. steel outer housing for pharmaceutical and clinical applications. The Heratherm™ series provide bench-top models with 60, 100 or 180 l as well as floor models with 400 or 750 l chamber volume and 3 different fittings, each optionally with gravity- or mechanical convection. - Very high energy efficiency, environmentally friendly materials (reduced use of formaldehyde), reduced heat emission. - Programmable timer. - Small footprint. - Flexible shelf system doubles the number of shelves and therefore the footprint. - Very good spatial and temporal temperature stability. - Automatic visual and acoustic over-temperature alarm. - Very low temperatures at outer wall. - Easy to read vacuum fluorescent display. - Intuitive user interface for setting temperature. - Easy cleaning due to edgeless fabrication. Heratherm™ General Protocol: Perfect for routine daily work from 50 to 250 °C. Chambers made from corrosion-resistant st. steel with rounded corners. Timer, mechanical exhaust vent as well as 2 shelves are incl. as standard. Heratherm™ Advanced Protocol: For a greater flexibility and accuracy of temperature values. With V2A st. steel interior, works up to 330 °C at highly stable temperatures. Digital timer for daily or weekly ON / OFF cycles. Up to 10 cycles can be stored and combined as ramps. Fan speed and air valve can be integrated into ramp programming. Selectable quick start function allows for extremely fast heating. Heratherm™ Advanced Protocol Security: Additional to equipment of the Advanced Protocol series: under-temperature alarm for improved sample protection. With door lock and door alarm to prevent disruption and allow for safe cultures for a long time. The oven desactivates when the samples are dry, saving energy (requieres optional sample temperature sensor). The V2A inner chamber can be supplemented by a st. steel outer housing for pharmaceutical and clinical applications.
Product Detail
Models UN / UNplus with natural convection. Models UF / UFplus with forced air circulation. The all-round genius among the heating ovens corner covers a multicude of applications, ideally at temperature above + 50 °C. Fresh air is preheated in a pre-heating chamber to avoid temperature deviations. AtmoCONTROL - control and logging software For direct setting parameters as well as process time. Fast and easy programming of complex processes via AtmoCONTROL by means of the mouse or touchpad on the notebook. Programme functions SingleDISPLAY and TwinDISPLAY: - Reading out, managing and organising the data logger. - Saving the log memory in various formats. - Online monitoring of up to 32 connected appliances. - Optical alarms when the alarm limits individually set at the ControlCOCKPIT are exceeded. - Automatic alarm to one or several e-mail addresses. Medical device certification: Memmert universal ovens UNm / UNmplus / UFm / UFmplus are a Class I medical device in accordance with EU directive 93/42/EWG. In accordance with the intended use Memmert heating oven Um may be used for heating fango, silivate and APS packs for physical therapy and keeping them warm. NULL Models UN / UNplus with natural convection. Models UF / UFplus with forced air circulation. The all-round genius among the heating ovens corner covers a multicude of applications, ideally at temperature above + 50 °C. Fresh air is preheated in a pre-heating chamber to avoid temperature deviations. AtmoCONTROL - control and logging software For direct setting parameters as well as process time. Fast and easy programming of complex processes via AtmoCONTROL by means of the mouse or touchpad on the notebook. Programme functions SingleDISPLAY and TwinDISPLAY: - Reading out, managing and organising the data logger. - Saving the log memory in various formats. - Online monitoring of up to 32 connected appliances. - Optical alarms when the alarm limits individually set at the ControlCOCKPIT are exceeded. - Automatic alarm to one or several e-mail addresses. Medical device certification: Memmert universal ovens UNm / UNmplus / UFm / UFmplus are a Class I medical device in accordance with EU directive 93/42/EWG. In accordance with the intended use Memmert heating oven Um may be used for heating fango, silivate and APS packs for physical therapy and keeping them warm. NULL
Product Detail
The Heratherm™ series provide bench-top models with 60, 100 or 180 l as well as floor models with 400 or 750 l chamber volume and 3 different fittings, each optionally with gravity- or mechanical convection. - Very high energy efficiency, environmentally friendly materials (reduced use of formaldehyde), reduced heat emission. - Programmable timer. - Small footprint. - Flexible shelf system doubles the number of shelves and therefore the footprint. - Very good spatial and temporal temperature stability. - Automatic visual and acoustic over-temperature alarm. - Very low temperatures at outer wall. - Easy to read vacuum fluorescent display. - Intuitive user interface for setting temperature. - Easy cleaning due to edgeless fabrication. Heratherm™ General Protocol: Perfect for routine daily work from 50 to 250 °C. Chambers made from corrosion-resistant st. steel with rounded corners. Timer, mechanical exhaust vent as well as 2 shelves are incl. as standard. Heratherm™ Advanced Protocol: For a greater flexibility and accuracy of temperature values. With V2A st. steel interior, works up to 330 °C at highly stable temperatures. Digital timer for daily or weekly ON / OFF cycles. Up to 10 cycles can be stored and combined as ramps. Fan speed and air valve can be integrated into ramp programming. Selectable quick start function allows for extremely fast heating. Heratherm™ Advanced Protocol Security: Additional to equipment of the Advanced Protocol series: under-temperature alarm for improved sample protection. With door lock and door alarm to prevent disruption and allow for safe cultures for a long time. The oven desactivates when the samples are dry, saving energy (requieres optional sample temperature sensor). The V2A inner chamber can be supplemented by a st. steel outer housing for pharmaceutical and clinical applications. The Heratherm™ series provide bench-top models with 60, 100 or 180 l as well as floor models with 400 or 750 l chamber volume and 3 different fittings, each optionally with gravity- or mechanical convection. - Very high energy efficiency, environmentally friendly materials (reduced use of formaldehyde), reduced heat emission. - Programmable timer. - Small footprint. - Flexible shelf system doubles the number of shelves and therefore the footprint. - Very good spatial and temporal temperature stability. - Automatic visual and acoustic over-temperature alarm. - Very low temperatures at outer wall. - Easy to read vacuum fluorescent display. - Intuitive user interface for setting temperature. - Easy cleaning due to edgeless fabrication. Heratherm™ General Protocol: Perfect for routine daily work from 50 to 250 °C. Chambers made from corrosion-resistant st. steel with rounded corners. Timer, mechanical exhaust vent as well as 2 shelves are incl. as standard. Heratherm™ Advanced Protocol: For a greater flexibility and accuracy of temperature values. With V2A st. steel interior, works up to 330 °C at highly stable temperatures. Digital timer for daily or weekly ON / OFF cycles. Up to 10 cycles can be stored and combined as ramps. Fan speed and air valve can be integrated into ramp programming. Selectable quick start function allows for extremely fast heating. Heratherm™ Advanced Protocol Security: Additional to equipment of the Advanced Protocol series: under-temperature alarm for improved sample protection. With door lock and door alarm to prevent disruption and allow for safe cultures for a long time. The oven desactivates when the samples are dry, saving energy (requieres optional sample temperature sensor). The V2A inner chamber can be supplemented by a st. steel outer housing for pharmaceutical and clinical applications.
Product Detail
Models UN / UNplus with natural convection. Models UF / UFplus with forced air circulation. The all-round genius among the heating ovens corner covers a multicude of applications, ideally at temperature above + 50 °C. Fresh air is preheated in a pre-heating chamber to avoid temperature deviations. AtmoCONTROL - control and logging software For direct setting parameters as well as process time. Fast and easy programming of complex processes via AtmoCONTROL by means of the mouse or touchpad on the notebook. Programme functions SingleDISPLAY and TwinDISPLAY: - Reading out, managing and organising the data logger. - Saving the log memory in various formats. - Online monitoring of up to 32 connected appliances. - Optical alarms when the alarm limits individually set at the ControlCOCKPIT are exceeded. - Automatic alarm to one or several e-mail addresses. Medical device certification: Memmert universal ovens UNm / UNmplus / UFm / UFmplus are a Class I medical device in accordance with EU directive 93/42/EWG. In accordance with the intended use Memmert heating oven Um may be used for heating fango, silivate and APS packs for physical therapy and keeping them warm. NULL Models UN / UNplus with natural convection. Models UF / UFplus with forced air circulation. The all-round genius among the heating ovens corner covers a multicude of applications, ideally at temperature above + 50 °C. Fresh air is preheated in a pre-heating chamber to avoid temperature deviations. AtmoCONTROL - control and logging software For direct setting parameters as well as process time. Fast and easy programming of complex processes via AtmoCONTROL by means of the mouse or touchpad on the notebook. Programme functions SingleDISPLAY and TwinDISPLAY: - Reading out, managing and organising the data logger. - Saving the log memory in various formats. - Online monitoring of up to 32 connected appliances. - Optical alarms when the alarm limits individually set at the ControlCOCKPIT are exceeded. - Automatic alarm to one or several e-mail addresses. Medical device certification: Memmert universal ovens UNm / UNmplus / UFm / UFmplus are a Class I medical device in accordance with EU directive 93/42/EWG. In accordance with the intended use Memmert heating oven Um may be used for heating fango, silivate and APS packs for physical therapy and keeping them warm. NULL
Product Detail
With their maximum working temperature of up to 300 °C and air circulation, the ovens achieve a perfect temperature uniformity which is much better than in ovens of most competitors. They can be used for various applications such as e.g. drying, sterilizing or warm storing. Ample warehousing of standard models provides for short delivery times. - Tmax 300 °C - Working temperature range: + 5 °C above room temperature up to 300 °C - Ovens TR 30 - TR 240 designed as tabletop models - Ovens TR 450 and TR 1050 designed as floor standing models - Horizontal, air circulation results in temperature uniformity better than +/- 5 °C - Stainless steel chamber, alloy 304 (AISI)/(DIN material no. 1.4301), rust-resistant and easy to clean - Only fiber materials are used which are not classified as carcinogenic according to TRGS 905, class 1 or 21With their max. working temperature of up to 300 °C and forced air circulation, the ovens achieve a very good temperature uniformity. They can be used for various applications such as e. g. drying, sterilising or warm storing. - Horizontal, forced air circulation results in temperature uniformity better than ÄT 8 K. - St. steel chamber, alloy 304 (AISI) / (DIN material no. 1.4301), rust-resistant and easy to clean. - Large handle to open and close the door. - Charging in multiple layers possible using removeable grids. - Infinitely adjustable exhaust at the rear wall with operation from the front. - PID microprocessor control with self-diagnosis system. - Solid state relays provide for low noise operation. - Models TR 60 to TR 420 designed as tabletop models. - Models TR 450 to TR 1050 designed as floor standing models. - Models TR 60 to TR 450 with large, wide-opening swing door, hinged on the right with quick release. - Models TR 800 and TR 1050 with double swing door with quick release and equipped transport rollers. Standard functionalities Controller R 7: - 1 program. - 1 segment. - Max. 1 control zone. - Programme entry in steps of 1°C resp. 1 min. Controller B 510: - 5 programs / 4 steps - Up to 2 settable functions - Calibration option (10 base points) - Touchpanel - NTLog (Real-time clock) - USB interface - Languages (DE/EN/FR/IT/ES/RU/DK/NL/PL/PT/SE/CZ/HU/TR/RO/NO/EE/FI/HR/LV/LT/SK/SI/CN) Controller C 450: - 10 programmes. - 20 segments. - Maximum 1 control zone. - Real-time clock. - Graphic color display. - Status messages in clear text. - Start time configurable (e. g. to use night power rates). - kWh meter. - Operating hour counter. - Auto tune. With their maximum working temperature of up to 300 °C and air circulation, the ovens achieve a perfect temperature uniformity which is much better than in ovens of most competitors. They can be used for various applications such as e.g. drying, sterilizing or warm storing. Ample warehousing of standard models provides for short delivery times. - Tmax 300 °C - Working temperature range: + 5 °C above room temperature up to 300 °C - Ovens TR 30 - TR 240 designed as tabletop models - Ovens TR 450 and TR 1050 designed as floor standing models - Horizontal, air circulation results in temperature uniformity better than +/- 5 °C - Stainless steel chamber, alloy 304 (AISI)/(DIN material no. 1.4301), rust-resistant and easy to clean - Only fiber materials are used which are not classified as carcinogenic according to TRGS 905, class 1 or 21With their max. working temperature of up to 300 °C and forced air circulation, the ovens achieve a very good temperature uniformity. They can be used for various applications such as e. g. drying, sterilising or warm storing. - Horizontal, forced air circulation results in temperature uniformity better than ÄT 8 K. - St. steel chamber, alloy 304 (AISI) / (DIN material no. 1.4301), rust-resistant and easy to clean. - Large handle to open and close the door. - Charging in multiple layers possible using removeable grids. - Infinitely adjustable exhaust at the rear wall with operation from the front. - PID microprocessor control with self-diagnosis system. - Solid state relays provide for low noise operation. - Models TR 60 to TR 420 designed as tabletop models. - Models TR 450 to TR 1050 designed as floor standing models. - Models TR 60 to TR 450 with large, wide-opening swing door, hinged on the right with quick release. - Models TR 800 and TR 1050 with double swing door with quick release and equipped transport rollers. Standard functionalities Controller R 7: - 1 program. - 1 segment. - Max. 1 control zone. - Programme entry in steps of 1°C resp. 1 min. Controller B 510: - 5 programs / 4 steps - Up to 2 settable functions - Calibration option (10 base points) - Touchpanel - NTLog (Real-time clock) - USB interface - Languages (DE/EN/FR/IT/ES/RU/DK/NL/PL/PT/SE/CZ/HU/TR/RO/NO/EE/FI/HR/LV/LT/SK/SI/CN) Controller C 450: - 10 programmes. - 20 segments. - Maximum 1 control zone. - Real-time clock. - Graphic color display. - Status messages in clear text. - Start time configurable (e. g. to use night power rates). - kWh meter. - Operating hour counter. - Auto tune.
Product Detail
The Heratherm™ series provide bench-top models with 60, 100 or 180 l as well as floor models with 400 or 750 l chamber volume and 3 different fittings, each optionally with gravity- or mechanical convection. - Very high energy efficiency, environmentally friendly materials (reduced use of formaldehyde), reduced heat emission. - Programmable timer. - Small footprint. - Flexible shelf system doubles the number of shelves and therefore the footprint. - Very good spatial and temporal temperature stability. - Automatic visual and acoustic over-temperature alarm. - Very low temperatures at outer wall. - Easy to read vacuum fluorescent display. - Intuitive user interface for setting temperature. - Easy cleaning due to edgeless fabrication. Heratherm™ General Protocol: Perfect for routine daily work from 50 to 250 °C. Chambers made from corrosion-resistant st. steel with rounded corners. Timer, mechanical exhaust vent as well as 2 shelves are incl. as standard. Heratherm™ Advanced Protocol: For a greater flexibility and accuracy of temperature values. With V2A st. steel interior, works up to 330 °C at highly stable temperatures. Digital timer for daily or weekly ON / OFF cycles. Up to 10 cycles can be stored and combined as ramps. Fan speed and air valve can be integrated into ramp programming. Selectable quick start function allows for extremely fast heating. Heratherm™ Advanced Protocol Security: Additional to equipment of the Advanced Protocol series: under-temperature alarm for improved sample protection. With door lock and door alarm to prevent disruption and allow for safe cultures for a long time. The oven desactivates when the samples are dry, saving energy (requieres optional sample temperature sensor). The V2A inner chamber can be supplemented by a st. steel outer housing for pharmaceutical and clinical applications. The Heratherm™ series provide bench-top models with 60, 100 or 180 l as well as floor models with 400 or 750 l chamber volume and 3 different fittings, each optionally with gravity- or mechanical convection. - Very high energy efficiency, environmentally friendly materials (reduced use of formaldehyde), reduced heat emission. - Programmable timer. - Small footprint. - Flexible shelf system doubles the number of shelves and therefore the footprint. - Very good spatial and temporal temperature stability. - Automatic visual and acoustic over-temperature alarm. - Very low temperatures at outer wall. - Easy to read vacuum fluorescent display. - Intuitive user interface for setting temperature. - Easy cleaning due to edgeless fabrication. Heratherm™ General Protocol: Perfect for routine daily work from 50 to 250 °C. Chambers made from corrosion-resistant st. steel with rounded corners. Timer, mechanical exhaust vent as well as 2 shelves are incl. as standard. Heratherm™ Advanced Protocol: For a greater flexibility and accuracy of temperature values. With V2A st. steel interior, works up to 330 °C at highly stable temperatures. Digital timer for daily or weekly ON / OFF cycles. Up to 10 cycles can be stored and combined as ramps. Fan speed and air valve can be integrated into ramp programming. Selectable quick start function allows for extremely fast heating. Heratherm™ Advanced Protocol Security: Additional to equipment of the Advanced Protocol series: under-temperature alarm for improved sample protection. With door lock and door alarm to prevent disruption and allow for safe cultures for a long time. The oven desactivates when the samples are dry, saving energy (requieres optional sample temperature sensor). The V2A inner chamber can be supplemented by a st. steel outer housing for pharmaceutical and clinical applications.
Product Detail
Die Modelle der Serie IKA Oven 125 dry sind leistungsstarke Trockenschränke für Temperier-, Trocknungs-, Alterungs- und Heizaufgaben. Schnelles Aufheizen und eine exakte Temperaturregelung garantieren reproduzierbare Laborergebnisse in Industrie, Schulen und Universitäten, Forschung, Qualitätskontrolle oder Wissenschaft. Dank hochwertiger Isolierung verfügt das Gerät über einen im Verhältnis zum Gesamtvolumen sehr großen Innenraum von 125 l. Dieser Aufbau reduziert auch Geruchsemissionen und Betriebskosten und sorgt für eine hervorragende räumliche Temperaturverteilung. Der Umlufttrockenschrank Oven 125 control dry heizt bis 300 °C. Mit dem zusätzlichen Temperatur-Wählbegrenzer TWB (DIN 12880) werden höchste Sicherheitsanforderungen erfüllt. Der Temperaturverlauf kann darüber hinaus während des Versuchs unabhängig von der Sicherheitstemperatur überwacht werden. So ist Ihr Versuchsgut immer geschützt. Durchdachter Innenraum Beim Oven 125 control dry wird der großzügige Innenraum komfortabel ausgeleuchtet. Eine praktische rückseitige Kabeldurchf ührung für Messungen im Ofen beziehungsweise im Versuchsgut ist bereits enthalten. Bei offener Türe schaltet sich der Lüfter automatisch ab. Im Innenraum aus Edelstahl lassen sich bis zu 6 Einschubböden unterbringen. Schnittstellen Der Oven 125 control dry bietet eine Schnittstelle für einen zus ätzlichen Sensor zur direkten Regelung der Temperatur im Versuchsgut. Versuchsparameter können direkt auf einen USB Stick gespeichert werden. Zwei Displays Auf zwei großen TFT Displays werden alle wichtigen Prozessparameter übersichtlich dargestellt. Über die intuitive Bedienoberfläche können Temperaturprofile und individuelle Benutzerprofile angelegt werden. Die Echtzeituhr ermöglicht die komfortable digitale Dokumentation und den zeitverzögerten Start. Die Modelle der Serie IKA Oven 125 dry sind leistungsstarke Trockenschränke für Temperier-, Trocknungs-, Alterungs- und Heizaufgaben. Schnelles Aufheizen und eine exakte Temperaturregelung garantieren reproduzierbare Laborergebnisse in Industrie, Schulen und Universitäten, Forschung, Qualitätskontrolle oder Wissenschaft. Dank hochwertiger Isolierung verfügt das Gerät über einen im Verhältnis zum Gesamtvolumen sehr großen Innenraum von 125 l. Dieser Aufbau reduziert auch Geruchsemissionen und Betriebskosten und sorgt für eine hervorragende räumliche Temperaturverteilung. Der Umlufttrockenschrank Oven 125 control dry heizt bis 300 °C. Mit dem zusätzlichen Temperatur-Wählbegrenzer TWB (DIN 12880) werden höchste Sicherheitsanforderungen erfüllt. Der Temperaturverlauf kann darüber hinaus während des Versuchs unabhängig von der Sicherheitstemperatur überwacht werden. So ist Ihr Versuchsgut immer geschützt. Durchdachter Innenraum Beim Oven 125 control dry wird der großzügige Innenraum komfortabel ausgeleuchtet. Eine praktische rückseitige Kabeldurchf ührung für Messungen im Ofen beziehungsweise im Versuchsgut ist bereits enthalten. Bei offener Türe schaltet sich der Lüfter automatisch ab. Im Innenraum aus Edelstahl lassen sich bis zu 6 Einschubböden unterbringen. Schnittstellen Der Oven 125 control dry bietet eine Schnittstelle für einen zus ätzlichen Sensor zur direkten Regelung der Temperatur im Versuchsgut. Versuchsparameter können direkt auf einen USB Stick gespeichert werden. Zwei Displays Auf zwei großen TFT Displays werden alle wichtigen Prozessparameter übersichtlich dargestellt. Über die intuitive Bedienoberfläche können Temperaturprofile und individuelle Benutzerprofile angelegt werden. Die Echtzeituhr ermöglicht die komfortable digitale Dokumentation und den zeitverzögerten Start.
Product Detail
The Heratherm™ series provide bench-top models with 60, 100 or 180 l as well as floor models with 400 or 750 l chamber volume and 3 different fittings, each optionally with gravity- or mechanical convection. - Very high energy efficiency, environmentally friendly materials (reduced use of formaldehyde), reduced heat emission. - Programmable timer. - Small footprint. - Flexible shelf system doubles the number of shelves and therefore the footprint. - Very good spatial and temporal temperature stability. - Automatic visual and acoustic over-temperature alarm. - Very low temperatures at outer wall. - Easy to read vacuum fluorescent display. - Intuitive user interface for setting temperature. - Easy cleaning due to edgeless fabrication. Heratherm™ General Protocol: Perfect for routine daily work from 50 to 250 °C. Chambers made from corrosion-resistant st. steel with rounded corners. Timer, mechanical exhaust vent as well as 2 shelves are incl. as standard. Heratherm™ Advanced Protocol: For a greater flexibility and accuracy of temperature values. With V2A st. steel interior, works up to 330 °C at highly stable temperatures. Digital timer for daily or weekly ON / OFF cycles. Up to 10 cycles can be stored and combined as ramps. Fan speed and air valve can be integrated into ramp programming. Selectable quick start function allows for extremely fast heating. Heratherm™ Advanced Protocol Security: Additional to equipment of the Advanced Protocol series: under-temperature alarm for improved sample protection. With door lock and door alarm to prevent disruption and allow for safe cultures for a long time. The oven desactivates when the samples are dry, saving energy (requieres optional sample temperature sensor). The V2A inner chamber can be supplemented by a st. steel outer housing for pharmaceutical and clinical applications. The Heratherm™ series provide bench-top models with 60, 100 or 180 l as well as floor models with 400 or 750 l chamber volume and 3 different fittings, each optionally with gravity- or mechanical convection. - Very high energy efficiency, environmentally friendly materials (reduced use of formaldehyde), reduced heat emission. - Programmable timer. - Small footprint. - Flexible shelf system doubles the number of shelves and therefore the footprint. - Very good spatial and temporal temperature stability. - Automatic visual and acoustic over-temperature alarm. - Very low temperatures at outer wall. - Easy to read vacuum fluorescent display. - Intuitive user interface for setting temperature. - Easy cleaning due to edgeless fabrication. Heratherm™ General Protocol: Perfect for routine daily work from 50 to 250 °C. Chambers made from corrosion-resistant st. steel with rounded corners. Timer, mechanical exhaust vent as well as 2 shelves are incl. as standard. Heratherm™ Advanced Protocol: For a greater flexibility and accuracy of temperature values. With V2A st. steel interior, works up to 330 °C at highly stable temperatures. Digital timer for daily or weekly ON / OFF cycles. Up to 10 cycles can be stored and combined as ramps. Fan speed and air valve can be integrated into ramp programming. Selectable quick start function allows for extremely fast heating. Heratherm™ Advanced Protocol Security: Additional to equipment of the Advanced Protocol series: under-temperature alarm for improved sample protection. With door lock and door alarm to prevent disruption and allow for safe cultures for a long time. The oven desactivates when the samples are dry, saving energy (requieres optional sample temperature sensor). The V2A inner chamber can be supplemented by a st. steel outer housing for pharmaceutical and clinical applications.
Product Detail
Models UN / UNplus with natural convection. Models UF / UFplus with forced air circulation. The all-round genius among the heating ovens corner covers a multicude of applications, ideally at temperature above + 50 °C. Fresh air is preheated in a pre-heating chamber to avoid temperature deviations. AtmoCONTROL - control and logging software For direct setting parameters as well as process time. Fast and easy programming of complex processes via AtmoCONTROL by means of the mouse or touchpad on the notebook. Programme functions SingleDISPLAY and TwinDISPLAY: - Reading out, managing and organising the data logger. - Saving the log memory in various formats. - Online monitoring of up to 32 connected appliances. - Optical alarms when the alarm limits individually set at the ControlCOCKPIT are exceeded. - Automatic alarm to one or several e-mail addresses. Medical device certification: Memmert universal ovens UNm / UNmplus / UFm / UFmplus are a Class I medical device in accordance with EU directive 93/42/EWG. In accordance with the intended use Memmert heating oven Um may be used for heating fango, silivate and APS packs for physical therapy and keeping them warm. NULL Models UN / UNplus with natural convection. Models UF / UFplus with forced air circulation. The all-round genius among the heating ovens corner covers a multicude of applications, ideally at temperature above + 50 °C. Fresh air is preheated in a pre-heating chamber to avoid temperature deviations. AtmoCONTROL - control and logging software For direct setting parameters as well as process time. Fast and easy programming of complex processes via AtmoCONTROL by means of the mouse or touchpad on the notebook. Programme functions SingleDISPLAY and TwinDISPLAY: - Reading out, managing and organising the data logger. - Saving the log memory in various formats. - Online monitoring of up to 32 connected appliances. - Optical alarms when the alarm limits individually set at the ControlCOCKPIT are exceeded. - Automatic alarm to one or several e-mail addresses. Medical device certification: Memmert universal ovens UNm / UNmplus / UFm / UFmplus are a Class I medical device in accordance with EU directive 93/42/EWG. In accordance with the intended use Memmert heating oven Um may be used for heating fango, silivate and APS packs for physical therapy and keeping them warm. NULL
Product Detail
Models UN / UNplus with natural convection. Models UF / UFplus with forced air circulation. The all-round genius among the heating ovens corner covers a multicude of applications, ideally at temperature above + 50 °C. Fresh air is preheated in a pre-heating chamber to avoid temperature deviations. AtmoCONTROL - control and logging software For direct setting parameters as well as process time. Fast and easy programming of complex processes via AtmoCONTROL by means of the mouse or touchpad on the notebook. Programme functions SingleDISPLAY and TwinDISPLAY: - Reading out, managing and organising the data logger. - Saving the log memory in various formats. - Online monitoring of up to 32 connected appliances. - Optical alarms when the alarm limits individually set at the ControlCOCKPIT are exceeded. - Automatic alarm to one or several e-mail addresses. Medical device certification: Memmert universal ovens UNm / UNmplus / UFm / UFmplus are a Class I medical device in accordance with EU directive 93/42/EWG. In accordance with the intended use Memmert heating oven Um may be used for heating fango, silivate and APS packs for physical therapy and keeping them warm. NULL Models UN / UNplus with natural convection. Models UF / UFplus with forced air circulation. The all-round genius among the heating ovens corner covers a multicude of applications, ideally at temperature above + 50 °C. Fresh air is preheated in a pre-heating chamber to avoid temperature deviations. AtmoCONTROL - control and logging software For direct setting parameters as well as process time. Fast and easy programming of complex processes via AtmoCONTROL by means of the mouse or touchpad on the notebook. Programme functions SingleDISPLAY and TwinDISPLAY: - Reading out, managing and organising the data logger. - Saving the log memory in various formats. - Online monitoring of up to 32 connected appliances. - Optical alarms when the alarm limits individually set at the ControlCOCKPIT are exceeded. - Automatic alarm to one or several e-mail addresses. Medical device certification: Memmert universal ovens UNm / UNmplus / UFm / UFmplus are a Class I medical device in accordance with EU directive 93/42/EWG. In accordance with the intended use Memmert heating oven Um may be used for heating fango, silivate and APS packs for physical therapy and keeping them warm. NULL
Product Detail
Universeller Trockenschrank für Temperier-, Trocknungs-, Alterungs- und Heizaufgaben im Labor. Mit dem IKA OVEN 125 basic dry lassen sich Anwendungen in Industrie, Schulen/Universitäten, Forschung, Qualitätskontrolle und Wissenschaft abdecken. Schnelle Aufheizzeiten und eine exakte Temperaturregelung garantieren reproduzierbare Versuchsergebnisse. Eine spezielle geruchsneutrale Isolierung sorgt zusätzlich für geringere Betriebskosten. Über eine USB-Schnittstelle lässt sich der Trockenschrank ansteuern und Versuchsparameter können aufgezeichnet werden. Besonderheiten: - Temperaturbereich: RT + 5°C bis 250°C - Innenvolumen: 125 l - Elektronisch einstellbare Lüftungsklappe - Übersichtliches Display und Bedienmenü - Tastensperre - Zeitschaltuhr - Einstellbarer Temperaturbegrenzer - Glasstür Universeller Trockenschrank für Temperier-, Trocknungs-, Alterungs- und Heizaufgaben im Labor. Mit dem IKA OVEN 125 basic dry lassen sich Anwendungen in Industrie, Schulen/Universitäten, Forschung, Qualitätskontrolle und Wissenschaft abdecken. Schnelle Aufheizzeiten und eine exakte Temperaturregelung garantieren reproduzierbare Versuchsergebnisse. Eine spezielle geruchsneutrale Isolierung sorgt zusätzlich für geringere Betriebskosten. Über eine USB-Schnittstelle lässt sich der Trockenschrank ansteuern und Versuchsparameter können aufgezeichnet werden. Besonderheiten: - Temperaturbereich: RT + 5°C bis 250°C - Innenvolumen: 125 l - Elektronisch einstellbare Lüftungsklappe - Übersichtliches Display und Bedienmenü - Tastensperre - Zeitschaltuhr - Einstellbarer Temperaturbegrenzer - Glasstür
Product Detail
With their maximum working temperature of up to 300 °C and air circulation, the ovens achieve a perfect temperature uniformity which is much better than in ovens of most competitors. They can be used for various applications such as e.g. drying, sterilizing or warm storing. Ample warehousing of standard models provides for short delivery times. - Tmax 300 °C - Working temperature range: + 5 °C above room temperature up to 300 °C - Ovens TR 30 - TR 240 designed as tabletop models - Ovens TR 450 and TR 1050 designed as floor standing models - Horizontal, air circulation results in temperature uniformity better than +/- 5 °C - Stainless steel chamber, alloy 304 (AISI)/(DIN material no. 1.4301), rust-resistant and easy to clean - Only fiber materials are used which are not classified as carcinogenic according to TRGS 905, class 1 or 22With their max. working temperature of up to 300 °C and forced air circulation, the ovens achieve a very good temperature uniformity. They can be used for various applications such as e. g. drying, sterilising or warm storing. - Horizontal, forced air circulation results in temperature uniformity better than ÄT 8 K. - St. steel chamber, alloy 304 (AISI) / (DIN material no. 1.4301), rust-resistant and easy to clean. - Large handle to open and close the door. - Charging in multiple layers possible using removeable grids. - Infinitely adjustable exhaust at the rear wall with operation from the front. - PID microprocessor control with self-diagnosis system. - Solid state relays provide for low noise operation. - Models TR 60 to TR 420 designed as tabletop models. - Models TR 450 to TR 1050 designed as floor standing models. - Models TR 60 to TR 450 with large, wide-opening swing door, hinged on the right with quick release. - Models TR 800 and TR 1050 with double swing door with quick release and equipped transport rollers. Standard functionalities Controller R 7: - 1 program. - 1 segment. - Max. 1 control zone. - Programme entry in steps of 1°C resp. 1 min. Controller B 510: - 5 programs / 4 steps - Up to 2 settable functions - Calibration option (10 base points) - Touchpanel - NTLog (Real-time clock) - USB interface - Languages (DE/EN/FR/IT/ES/RU/DK/NL/PL/PT/SE/CZ/HU/TR/RO/NO/EE/FI/HR/LV/LT/SK/SI/CN) Controller C 450: - 10 programmes. - 20 segments. - Maximum 1 control zone. - Real-time clock. - Graphic color display. - Status messages in clear text. - Start time configurable (e. g. to use night power rates). - kWh meter. - Operating hour counter. - Auto tune. With their maximum working temperature of up to 300 °C and air circulation, the ovens achieve a perfect temperature uniformity which is much better than in ovens of most competitors. They can be used for various applications such as e.g. drying, sterilizing or warm storing. Ample warehousing of standard models provides for short delivery times. - Tmax 300 °C - Working temperature range: + 5 °C above room temperature up to 300 °C - Ovens TR 30 - TR 240 designed as tabletop models - Ovens TR 450 and TR 1050 designed as floor standing models - Horizontal, air circulation results in temperature uniformity better than +/- 5 °C - Stainless steel chamber, alloy 304 (AISI)/(DIN material no. 1.4301), rust-resistant and easy to clean - Only fiber materials are used which are not classified as carcinogenic according to TRGS 905, class 1 or 22With their max. working temperature of up to 300 °C and forced air circulation, the ovens achieve a very good temperature uniformity. They can be used for various applications such as e. g. drying, sterilising or warm storing. - Horizontal, forced air circulation results in temperature uniformity better than ÄT 8 K. - St. steel chamber, alloy 304 (AISI) / (DIN material no. 1.4301), rust-resistant and easy to clean. - Large handle to open and close the door. - Charging in multiple layers possible using removeable grids. - Infinitely adjustable exhaust at the rear wall with operation from the front. - PID microprocessor control with self-diagnosis system. - Solid state relays provide for low noise operation. - Models TR 60 to TR 420 designed as tabletop models. - Models TR 450 to TR 1050 designed as floor standing models. - Models TR 60 to TR 450 with large, wide-opening swing door, hinged on the right with quick release. - Models TR 800 and TR 1050 with double swing door with quick release and equipped transport rollers. Standard functionalities Controller R 7: - 1 program. - 1 segment. - Max. 1 control zone. - Programme entry in steps of 1°C resp. 1 min. Controller B 510: - 5 programs / 4 steps - Up to 2 settable functions - Calibration option (10 base points) - Touchpanel - NTLog (Real-time clock) - USB interface - Languages (DE/EN/FR/IT/ES/RU/DK/NL/PL/PT/SE/CZ/HU/TR/RO/NO/EE/FI/HR/LV/LT/SK/SI/CN) Controller C 450: - 10 programmes. - 20 segments. - Maximum 1 control zone. - Real-time clock. - Graphic color display. - Status messages in clear text. - Start time configurable (e. g. to use night power rates). - kWh meter. - Operating hour counter. - Auto tune.
Product Detail© 2023 Copyright. All Rights Reserved. Unit 19, Euroway House, Roydsdale Way, Bradford, BD4 6SE, UK
© 2023 Copyright. All Rights Reserved. Unit 19, Euroway House, Roydsdale Way, Bradford, BD4 6SE, UK
