Tube Furnaces

RV152V62AN, Omnilab

The high-temperature tube furnaces are available in either horizontal (type RHTH) or vertical (type RHTV) designs. High-quality insulation materials made of vacuum-formed fiber plates enable energy-saving operation and a fast heating time due to low heat storage and heat conductivity. By using different gas supply systems, operations can be performed under non-flammable or flammable protective or reactive gases or under vacuum. - Tmax 1600 °C, 1700 °C, or 1800 °C - MoSi2 heating elements, mounted vertically for easy replacement - Only fiber materials are used which are not classified as carcinogenic according to TRGS 905, class 1 or 2 Rectangular outer housing with slots for convection cooling Tube furnaces RHTV with frame for vertical operation - Ceramic working tube made of material C 799 incl. fiber plugs for operation under air - Over-temperature limiter with adjustable cutout temperature for thermal protection class 2 in accordance with EN 60519-2 as temperature limiter to protect the furnace and load and with selectable maximum temperature gradient as tube protection - Switchgear and control unit separate from furnace in separate floor standing cabinetThe high-temperature tube furnaces are available in either horizontal (type RHTH) or vertical (type RHTV) designs. High-quality insulation materials made of vacuum-formed fibre plates enable energy-saving operation and a fast heating time due to low heat storage and heat conductivity. By using different gas supply systems, operations can be performed under non-flammable or flammable protective or reactive gases or under vacuum. - Insulation with vacuum-formed ceramic fibre plates. - Dual shell housing made of sheets of textured st. steel. - Ceramic working tube made of material C 799 incl. fibre plugs for operation under air. - Type B thermocouple. - Power unit with low-voltage transformer and thyristor. - Over-temperature limiter. - Switchgear and control unit separate from furnace in separate floor standing cabinet. - MoSi2 heating elements. The high-temperature tube furnaces are available in either horizontal (type RHTH) or vertical (type RHTV) designs. High-quality insulation materials made of vacuum-formed fiber plates enable energy-saving operation and a fast heating time due to low heat storage and heat conductivity. By using different gas supply systems, operations can be performed under non-flammable or flammable protective or reactive gases or under vacuum. - Tmax 1600 °C, 1700 °C, or 1800 °C - MoSi2 heating elements, mounted vertically for easy replacement - Only fiber materials are used which are not classified as carcinogenic according to TRGS 905, class 1 or 2 Rectangular outer housing with slots for convection cooling Tube furnaces RHTV with frame for vertical operation - Ceramic working tube made of material C 799 incl. fiber plugs for operation under air - Over-temperature limiter with adjustable cutout temperature for thermal protection class 2 in accordance with EN 60519-2 as temperature limiter to protect the furnace and load and with selectable maximum temperature gradient as tube protection - Switchgear and control unit separate from furnace in separate floor standing cabinetThe high-temperature tube furnaces are available in either horizontal (type RHTH) or vertical (type RHTV) designs. High-quality insulation materials made of vacuum-formed fibre plates enable energy-saving operation and a fast heating time due to low heat storage and heat conductivity. By using different gas supply systems, operations can be performed under non-flammable or flammable protective or reactive gases or under vacuum. - Insulation with vacuum-formed ceramic fibre plates. - Dual shell housing made of sheets of textured st. steel. - Ceramic working tube made of material C 799 incl. fibre plugs for operation under air. - Type B thermocouple. - Power unit with low-voltage transformer and thyristor. - Over-temperature limiter. - Switchgear and control unit separate from furnace in separate floor standing cabinet. - MoSi2 heating elements.

RV152V72AN, Omnilab

The high-temperature tube furnaces are available in either horizontal (type RHTH) or vertical (type RHTV) designs. High-quality insulation materials made of vacuum-formed fiber plates enable energy-saving operation and a fast heating time due to low heat storage and heat conductivity. By using different gas supply systems, operations can be performed under non-flammable or flammable protective or reactive gases or under vacuum. - Tmax 1600 °C, 1700 °C, or 1800 °C - MoSi2 heating elements, mounted vertically for easy replacement - Only fiber materials are used which are not classified as carcinogenic according to TRGS 905, class 1 or 2 Rectangular outer housing with slots for convection cooling Tube furnaces RHTV with frame for vertical operation - Ceramic working tube made of material C 799 incl. fiber plugs for operation under air - Over-temperature limiter with adjustable cutout temperature for thermal protection class 2 in accordance with EN 60519-2 as temperature limiter to protect the furnace and load and with selectable maximum temperature gradient as tube protection - Switchgear and control unit separate from furnace in separate floor standing cabinetThe high-temperature tube furnaces are available in either horizontal (type RHTH) or vertical (type RHTV) designs. High-quality insulation materials made of vacuum-formed fibre plates enable energy-saving operation and a fast heating time due to low heat storage and heat conductivity. By using different gas supply systems, operations can be performed under non-flammable or flammable protective or reactive gases or under vacuum. - Insulation with vacuum-formed ceramic fibre plates. - Dual shell housing made of sheets of textured st. steel. - Ceramic working tube made of material C 799 incl. fibre plugs for operation under air. - Type B thermocouple. - Power unit with low-voltage transformer and thyristor. - Over-temperature limiter. - Switchgear and control unit separate from furnace in separate floor standing cabinet. - MoSi2 heating elements. The high-temperature tube furnaces are available in either horizontal (type RHTH) or vertical (type RHTV) designs. High-quality insulation materials made of vacuum-formed fiber plates enable energy-saving operation and a fast heating time due to low heat storage and heat conductivity. By using different gas supply systems, operations can be performed under non-flammable or flammable protective or reactive gases or under vacuum. - Tmax 1600 °C, 1700 °C, or 1800 °C - MoSi2 heating elements, mounted vertically for easy replacement - Only fiber materials are used which are not classified as carcinogenic according to TRGS 905, class 1 or 2 Rectangular outer housing with slots for convection cooling Tube furnaces RHTV with frame for vertical operation - Ceramic working tube made of material C 799 incl. fiber plugs for operation under air - Over-temperature limiter with adjustable cutout temperature for thermal protection class 2 in accordance with EN 60519-2 as temperature limiter to protect the furnace and load and with selectable maximum temperature gradient as tube protection - Switchgear and control unit separate from furnace in separate floor standing cabinetThe high-temperature tube furnaces are available in either horizontal (type RHTH) or vertical (type RHTV) designs. High-quality insulation materials made of vacuum-formed fibre plates enable energy-saving operation and a fast heating time due to low heat storage and heat conductivity. By using different gas supply systems, operations can be performed under non-flammable or flammable protective or reactive gases or under vacuum. - Insulation with vacuum-formed ceramic fibre plates. - Dual shell housing made of sheets of textured st. steel. - Ceramic working tube made of material C 799 incl. fibre plugs for operation under air. - Type B thermocouple. - Power unit with low-voltage transformer and thyristor. - Over-temperature limiter. - Switchgear and control unit separate from furnace in separate floor standing cabinet. - MoSi2 heating elements.

RV322V62AN, Omnilab

The high-temperature tube furnaces are available in either horizontal (type RHTH) or vertical (type RHTV) designs. High-quality insulation materials made of vacuum-formed fiber plates enable energy-saving operation and a fast heating time due to low heat storage and heat conductivity. By using different gas supply systems, operations can be performed under non-flammable or flammable protective or reactive gases or under vacuum. - Tmax 1600 °C, 1700 °C, or 1800 °C - MoSi2 heating elements, mounted vertically for easy replacement - Only fiber materials are used which are not classified as carcinogenic according to TRGS 905, class 1 or 2 Rectangular outer housing with slots for convection cooling Tube furnaces RHTV with frame for vertical operation - Ceramic working tube made of material C 799 incl. fiber plugs for operation under air - Over-temperature limiter with adjustable cutout temperature for thermal protection class 2 in accordance with EN 60519-2 as temperature limiter to protect the furnace and load and with selectable maximum temperature gradient as tube protection - Switchgear and control unit separate from furnace in separate floor standing cabinetThe high-temperature tube furnaces are available in either horizontal (type RHTH) or vertical (type RHTV) designs. High-quality insulation materials made of vacuum-formed fibre plates enable energy-saving operation and a fast heating time due to low heat storage and heat conductivity. By using different gas supply systems, operations can be performed under non-flammable or flammable protective or reactive gases or under vacuum. - Insulation with vacuum-formed ceramic fibre plates. - Dual shell housing made of sheets of textured st. steel. - Ceramic working tube made of material C 799 incl. fibre plugs for operation under air. - Type B thermocouple. - Power unit with low-voltage transformer and thyristor. - Over-temperature limiter. - Switchgear and control unit separate from furnace in separate floor standing cabinet. - MoSi2 heating elements. The high-temperature tube furnaces are available in either horizontal (type RHTH) or vertical (type RHTV) designs. High-quality insulation materials made of vacuum-formed fiber plates enable energy-saving operation and a fast heating time due to low heat storage and heat conductivity. By using different gas supply systems, operations can be performed under non-flammable or flammable protective or reactive gases or under vacuum. - Tmax 1600 °C, 1700 °C, or 1800 °C - MoSi2 heating elements, mounted vertically for easy replacement - Only fiber materials are used which are not classified as carcinogenic according to TRGS 905, class 1 or 2 Rectangular outer housing with slots for convection cooling Tube furnaces RHTV with frame for vertical operation - Ceramic working tube made of material C 799 incl. fiber plugs for operation under air - Over-temperature limiter with adjustable cutout temperature for thermal protection class 2 in accordance with EN 60519-2 as temperature limiter to protect the furnace and load and with selectable maximum temperature gradient as tube protection - Switchgear and control unit separate from furnace in separate floor standing cabinetThe high-temperature tube furnaces are available in either horizontal (type RHTH) or vertical (type RHTV) designs. High-quality insulation materials made of vacuum-formed fibre plates enable energy-saving operation and a fast heating time due to low heat storage and heat conductivity. By using different gas supply systems, operations can be performed under non-flammable or flammable protective or reactive gases or under vacuum. - Insulation with vacuum-formed ceramic fibre plates. - Dual shell housing made of sheets of textured st. steel. - Ceramic working tube made of material C 799 incl. fibre plugs for operation under air. - Type B thermocouple. - Power unit with low-voltage transformer and thyristor. - Over-temperature limiter. - Switchgear and control unit separate from furnace in separate floor standing cabinet. - MoSi2 heating elements.

RV282V82AN, Omnilab

The high-temperature tube furnaces are available in either horizontal (type RHTH) or vertical (type RHTV) designs. High-quality insulation materials made of vacuum-formed fiber plates enable energy-saving operation and a fast heating time due to low heat storage and heat conductivity. By using different gas supply systems, operations can be performed under non-flammable or flammable protective or reactive gases or under vacuum. - Tmax 1600 °C, 1700 °C, or 1800 °C - MoSi2 heating elements, mounted vertically for easy replacement - Only fiber materials are used which are not classified as carcinogenic according to TRGS 905, class 1 or 2 Rectangular outer housing with slots for convection cooling Tube furnaces RHTV with frame for vertical operation - Ceramic working tube made of material C 799 incl. fiber plugs for operation under air - Over-temperature limiter with adjustable cutout temperature for thermal protection class 2 in accordance with EN 60519-2 as temperature limiter to protect the furnace and load and with selectable maximum temperature gradient as tube protection - Switchgear and control unit separate from furnace in separate floor standing cabinetThe high-temperature tube furnaces are available in either horizontal (type RHTH) or vertical (type RHTV) designs. High-quality insulation materials made of vacuum-formed fibre plates enable energy-saving operation and a fast heating time due to low heat storage and heat conductivity. By using different gas supply systems, operations can be performed under non-flammable or flammable protective or reactive gases or under vacuum. - Insulation with vacuum-formed ceramic fibre plates. - Dual shell housing made of sheets of textured st. steel. - Ceramic working tube made of material C 799 incl. fibre plugs for operation under air. - Type B thermocouple. - Power unit with low-voltage transformer and thyristor. - Over-temperature limiter. - Switchgear and control unit separate from furnace in separate floor standing cabinet. - MoSi2 heating elements. The high-temperature tube furnaces are available in either horizontal (type RHTH) or vertical (type RHTV) designs. High-quality insulation materials made of vacuum-formed fiber plates enable energy-saving operation and a fast heating time due to low heat storage and heat conductivity. By using different gas supply systems, operations can be performed under non-flammable or flammable protective or reactive gases or under vacuum. - Tmax 1600 °C, 1700 °C, or 1800 °C - MoSi2 heating elements, mounted vertically for easy replacement - Only fiber materials are used which are not classified as carcinogenic according to TRGS 905, class 1 or 2 Rectangular outer housing with slots for convection cooling Tube furnaces RHTV with frame for vertical operation - Ceramic working tube made of material C 799 incl. fiber plugs for operation under air - Over-temperature limiter with adjustable cutout temperature for thermal protection class 2 in accordance with EN 60519-2 as temperature limiter to protect the furnace and load and with selectable maximum temperature gradient as tube protection - Switchgear and control unit separate from furnace in separate floor standing cabinetThe high-temperature tube furnaces are available in either horizontal (type RHTH) or vertical (type RHTV) designs. High-quality insulation materials made of vacuum-formed fibre plates enable energy-saving operation and a fast heating time due to low heat storage and heat conductivity. By using different gas supply systems, operations can be performed under non-flammable or flammable protective or reactive gases or under vacuum. - Insulation with vacuum-formed ceramic fibre plates. - Dual shell housing made of sheets of textured st. steel. - Ceramic working tube made of material C 799 incl. fibre plugs for operation under air. - Type B thermocouple. - Power unit with low-voltage transformer and thyristor. - Over-temperature limiter. - Switchgear and control unit separate from furnace in separate floor standing cabinet. - MoSi2 heating elements.

R-322L3AN, Omnilab

These compact tube furnaces with integrated control systems can be used universally for many processes. Equipped with a standard working tube of C 530 ceramic and two fiber plugs, these tube furnaces have an unbeatable price/performance ratio. - Tmax 1200 °C or 1300 °C - Single-zoned design as standard - Dual shell housing made of sheets of textured stainless steel - Only fiber materials are used which are not classified as carcinogenic according to TRGS 905, class 1 or 2 - Outer tube diameter of 50 mm to 170 mm, heated length from 250 mm to 1000 mm - Working tube of C 530 ceramic including two fiber plugs as standard equipment These compact tube furnaces with integrated control systems can be used universally for many processes. Equipped with a standard working tube of C 530 ceramic and two fiber plugs, these tube furnaces have an unbeatable price/performance ratio. - Tmax 1200 °C or 1300 °C - Single-zoned design as standard - Dual shell housing made of sheets of textured stainless steel - Only fiber materials are used which are not classified as carcinogenic according to TRGS 905, class 1 or 2 - Outer tube diameter of 50 mm to 170 mm, heated length from 250 mm to 1000 mm - Working tube of C 530 ceramic including two fiber plugs as standard equipment

RT522LAN, Omnilab

These compact tube furnaces are used when laboratory experiments must be performed horizontally, vertically, or at specific angles. The ability to configure the angle of tilt and the working height, and their compact design, also make these tube furnaces suitable for integration into existing process systems. - Tmax 1100 °C, 1300 °C, or 1500 °C - Compact design - Only fiber materials are used which are not classified as carcinogenic according to TRGS 905, class 1 or 2 - Vertical or horizontal operation freely adjustable These compact tube furnaces are used when laboratory experiments must be performed horizontally, vertically, or at specific angles. The ability to configure the angle of tilt and the working height, and their compact design, also make these tube furnaces suitable for integration into existing process systems. - Tmax 1100 °C, 1300 °C, or 1500 °C - Compact design - Only fiber materials are used which are not classified as carcinogenic according to TRGS 905, class 1 or 2 - Vertical or horizontal operation freely adjustable

037106, Omnilab

Unique in its compact design and simple handling the glass oven B-585 offers a variety of possibilities in the lab. Especially small and medium sample quantities have to be dried fast, gentle and reproducible - an ideal application for this flexible device. Depending on configuration, substances can be distilled, sublimated or freeze-dried. The heating element is a glass tube with an electrically conductive coating. It heats the furnace chamber up through the entire length up to a max. temperature of 300 °C. The transparent sample chamber is easily visible, in case of incipient decomposition, the process can be interrupted. Visual monitioring, graphic display with adjustable temperature control, variable rotation up to 50 min-1, vacuum and inert gas connection, integrated cooling, overheating and protection against contact for the heating tube. Use of the rotation drying flask for quick drying without lumps. Optional extension to the sublimation. Complete and ready to use incl. 1 rotation drying flask 60 ml with vapor duct (DDR), 1 Kugelrohr 20 ml with DDR, 1 cooling device, 1 vacuum seal, diverse standard accessories. Unique in its compact design and simple handling the glass oven B-585 offers a variety of possibilities in the lab. Especially small and medium sample quantities have to be dried fast, gentle and reproducible - an ideal application for this flexible device. Depending on configuration, substances can be distilled, sublimated or freeze-dried. The heating element is a glass tube with an electrically conductive coating. It heats the furnace chamber up through the entire length up to a max. temperature of 300 °C. The transparent sample chamber is easily visible, in case of incipient decomposition, the process can be interrupted. Visual monitioring, graphic display with adjustable temperature control, variable rotation up to 50 min-1, vacuum and inert gas connection, integrated cooling, overheating and protection against contact for the heating tube. Use of the rotation drying flask for quick drying without lumps. Optional extension to the sublimation. Complete and ready to use incl. 1 rotation drying flask 60 ml with vapor duct (DDR), 1 Kugelrohr 20 ml with DDR, 1 cooling device, 1 vacuum seal, diverse standard accessories.

RV282V62AN, Omnilab

The high-temperature tube furnaces are available in either horizontal (type RHTH) or vertical (type RHTV) designs. High-quality insulation materials made of vacuum-formed fiber plates enable energy-saving operation and a fast heating time due to low heat storage and heat conductivity. By using different gas supply systems, operations can be performed under non-flammable or flammable protective or reactive gases or under vacuum. - Tmax 1600 °C, 1700 °C, or 1800 °C - MoSi2 heating elements, mounted vertically for easy replacement - Only fiber materials are used which are not classified as carcinogenic according to TRGS 905, class 1 or 2 Rectangular outer housing with slots for convection cooling Tube furnaces RHTV with frame for vertical operation - Ceramic working tube made of material C 799 incl. fiber plugs for operation under air - Over-temperature limiter with adjustable cutout temperature for thermal protection class 2 in accordance with EN 60519-2 as temperature limiter to protect the furnace and load and with selectable maximum temperature gradient as tube protection - Switchgear and control unit separate from furnace in separate floor standing cabinetThe high-temperature tube furnaces are available in either horizontal (type RHTH) or vertical (type RHTV) designs. High-quality insulation materials made of vacuum-formed fibre plates enable energy-saving operation and a fast heating time due to low heat storage and heat conductivity. By using different gas supply systems, operations can be performed under non-flammable or flammable protective or reactive gases or under vacuum. - Insulation with vacuum-formed ceramic fibre plates. - Dual shell housing made of sheets of textured st. steel. - Ceramic working tube made of material C 799 incl. fibre plugs for operation under air. - Type B thermocouple. - Power unit with low-voltage transformer and thyristor. - Over-temperature limiter. - Switchgear and control unit separate from furnace in separate floor standing cabinet. - MoSi2 heating elements. The high-temperature tube furnaces are available in either horizontal (type RHTH) or vertical (type RHTV) designs. High-quality insulation materials made of vacuum-formed fiber plates enable energy-saving operation and a fast heating time due to low heat storage and heat conductivity. By using different gas supply systems, operations can be performed under non-flammable or flammable protective or reactive gases or under vacuum. - Tmax 1600 °C, 1700 °C, or 1800 °C - MoSi2 heating elements, mounted vertically for easy replacement - Only fiber materials are used which are not classified as carcinogenic according to TRGS 905, class 1 or 2 Rectangular outer housing with slots for convection cooling Tube furnaces RHTV with frame for vertical operation - Ceramic working tube made of material C 799 incl. fiber plugs for operation under air - Over-temperature limiter with adjustable cutout temperature for thermal protection class 2 in accordance with EN 60519-2 as temperature limiter to protect the furnace and load and with selectable maximum temperature gradient as tube protection - Switchgear and control unit separate from furnace in separate floor standing cabinetThe high-temperature tube furnaces are available in either horizontal (type RHTH) or vertical (type RHTV) designs. High-quality insulation materials made of vacuum-formed fibre plates enable energy-saving operation and a fast heating time due to low heat storage and heat conductivity. By using different gas supply systems, operations can be performed under non-flammable or flammable protective or reactive gases or under vacuum. - Insulation with vacuum-formed ceramic fibre plates. - Dual shell housing made of sheets of textured st. steel. - Ceramic working tube made of material C 799 incl. fibre plugs for operation under air. - Type B thermocouple. - Power unit with low-voltage transformer and thyristor. - Over-temperature limiter. - Switchgear and control unit separate from furnace in separate floor standing cabinet. - MoSi2 heating elements.

RT512LAN, Omnilab

These compact tube furnaces are used when laboratory experiments must be performed horizontally, vertically, or at specific angles. The ability to configure the angle of tilt and the working height, and their compact design, also make these tube furnaces suitable for integration into existing process systems. - Tmax 1100 °C, 1300 °C, or 1500 °C - Compact design - Only fiber materials are used which are not classified as carcinogenic according to TRGS 905, class 1 or 2 - Vertical or horizontal operation freely adjustable These compact tube furnaces are used when laboratory experiments must be performed horizontally, vertically, or at specific angles. The ability to configure the angle of tilt and the working height, and their compact design, also make these tube furnaces suitable for integration into existing process systems. - Tmax 1100 °C, 1300 °C, or 1500 °C - Compact design - Only fiber materials are used which are not classified as carcinogenic according to TRGS 905, class 1 or 2 - Vertical or horizontal operation freely adjustable

RH152V72AN, Omnilab

The high-temperature tube furnaces are available in either horizontal (type RHTH) or vertical (type RHTV) designs. High-quality insulation materials made of vacuum-formed fiber plates enable energy-saving operation and a fast heating time due to low heat storage and heat conductivity. By using different gas supply systems, operations can be performed under non-flammable or flammable protective or reactive gases or under vacuum. - Tmax 1600 °C, 1700 °C, or 1800 °C - MoSi2 heating elements, mounted vertically for easy replacement - Only fiber materials are used which are not classified as carcinogenic according to TRGS 905, class 1 or 2 Rectangular outer housing with slots for convection cooling Tube furnaces RHTV with frame for vertical operation - Ceramic working tube made of material C 799 incl. fiber plugs for operation under air - Over-temperature limiter with adjustable cutout temperature for thermal protection class 2 in accordance with EN 60519-2 as temperature limiter to protect the furnace and load and with selectable maximum temperature gradient as tube protection - Switchgear and control unit separate from furnace in separate floor standing cabinetThe high-temperature tube furnaces are available in either horizontal (type RHTH) or vertical (type RHTV) designs. High-quality insulation materials made of vacuum-formed fibre plates enable energy-saving operation and a fast heating time due to low heat storage and heat conductivity. By using different gas supply systems, operations can be performed under non-flammable or flammable protective or reactive gases or under vacuum. - Insulation with vacuum-formed ceramic fibre plates. - Dual shell housing made of sheets of textured st. steel. - Ceramic working tube made of material C 799 incl. fibre plugs for operation under air. - Type B thermocouple. - Power unit with low-voltage transformer and thyristor. - Over-temperature limiter. - Switchgear and control unit separate from furnace in separate floor standing cabinet. - MoSi2 heating elements. The high-temperature tube furnaces are available in either horizontal (type RHTH) or vertical (type RHTV) designs. High-quality insulation materials made of vacuum-formed fiber plates enable energy-saving operation and a fast heating time due to low heat storage and heat conductivity. By using different gas supply systems, operations can be performed under non-flammable or flammable protective or reactive gases or under vacuum. - Tmax 1600 °C, 1700 °C, or 1800 °C - MoSi2 heating elements, mounted vertically for easy replacement - Only fiber materials are used which are not classified as carcinogenic according to TRGS 905, class 1 or 2 Rectangular outer housing with slots for convection cooling Tube furnaces RHTV with frame for vertical operation - Ceramic working tube made of material C 799 incl. fiber plugs for operation under air - Over-temperature limiter with adjustable cutout temperature for thermal protection class 2 in accordance with EN 60519-2 as temperature limiter to protect the furnace and load and with selectable maximum temperature gradient as tube protection - Switchgear and control unit separate from furnace in separate floor standing cabinetThe high-temperature tube furnaces are available in either horizontal (type RHTH) or vertical (type RHTV) designs. High-quality insulation materials made of vacuum-formed fibre plates enable energy-saving operation and a fast heating time due to low heat storage and heat conductivity. By using different gas supply systems, operations can be performed under non-flammable or flammable protective or reactive gases or under vacuum. - Insulation with vacuum-formed ceramic fibre plates. - Dual shell housing made of sheets of textured st. steel. - Ceramic working tube made of material C 799 incl. fibre plugs for operation under air. - Type B thermocouple. - Power unit with low-voltage transformer and thyristor. - Over-temperature limiter. - Switchgear and control unit separate from furnace in separate floor standing cabinet. - MoSi2 heating elements.

9012257, Omnilab

RH282V72AN, Omnilab

The high-temperature tube furnaces are available in either horizontal (type RHTH) or vertical (type RHTV) designs. High-quality insulation materials made of vacuum-formed fiber plates enable energy-saving operation and a fast heating time due to low heat storage and heat conductivity. By using different gas supply systems, operations can be performed under non-flammable or flammable protective or reactive gases or under vacuum. - Tmax 1600 °C, 1700 °C, or 1800 °C - MoSi2 heating elements, mounted vertically for easy replacement - Only fiber materials are used which are not classified as carcinogenic according to TRGS 905, class 1 or 2 Rectangular outer housing with slots for convection cooling Tube furnaces RHTV with frame for vertical operation - Ceramic working tube made of material C 799 incl. fiber plugs for operation under air - Over-temperature limiter with adjustable cutout temperature for thermal protection class 2 in accordance with EN 60519-2 as temperature limiter to protect the furnace and load and with selectable maximum temperature gradient as tube protection - Switchgear and control unit separate from furnace in separate floor standing cabinetThe high-temperature tube furnaces are available in either horizontal (type RHTH) or vertical (type RHTV) designs. High-quality insulation materials made of vacuum-formed fibre plates enable energy-saving operation and a fast heating time due to low heat storage and heat conductivity. By using different gas supply systems, operations can be performed under non-flammable or flammable protective or reactive gases or under vacuum. - Insulation with vacuum-formed ceramic fibre plates. - Dual shell housing made of sheets of textured st. steel. - Ceramic working tube made of material C 799 incl. fibre plugs for operation under air. - Type B thermocouple. - Power unit with low-voltage transformer and thyristor. - Over-temperature limiter. - Switchgear and control unit separate from furnace in separate floor standing cabinet. - MoSi2 heating elements. The high-temperature tube furnaces are available in either horizontal (type RHTH) or vertical (type RHTV) designs. High-quality insulation materials made of vacuum-formed fiber plates enable energy-saving operation and a fast heating time due to low heat storage and heat conductivity. By using different gas supply systems, operations can be performed under non-flammable or flammable protective or reactive gases or under vacuum. - Tmax 1600 °C, 1700 °C, or 1800 °C - MoSi2 heating elements, mounted vertically for easy replacement - Only fiber materials are used which are not classified as carcinogenic according to TRGS 905, class 1 or 2 Rectangular outer housing with slots for convection cooling Tube furnaces RHTV with frame for vertical operation - Ceramic working tube made of material C 799 incl. fiber plugs for operation under air - Over-temperature limiter with adjustable cutout temperature for thermal protection class 2 in accordance with EN 60519-2 as temperature limiter to protect the furnace and load and with selectable maximum temperature gradient as tube protection - Switchgear and control unit separate from furnace in separate floor standing cabinetThe high-temperature tube furnaces are available in either horizontal (type RHTH) or vertical (type RHTV) designs. High-quality insulation materials made of vacuum-formed fibre plates enable energy-saving operation and a fast heating time due to low heat storage and heat conductivity. By using different gas supply systems, operations can be performed under non-flammable or flammable protective or reactive gases or under vacuum. - Insulation with vacuum-formed ceramic fibre plates. - Dual shell housing made of sheets of textured st. steel. - Ceramic working tube made of material C 799 incl. fibre plugs for operation under air. - Type B thermocouple. - Power unit with low-voltage transformer and thyristor. - Over-temperature limiter. - Switchgear and control unit separate from furnace in separate floor standing cabinet. - MoSi2 heating elements.