LaboStar PRO DI 4 -mobile ultra pure water system with 7l-tank, 1,5 l/min HIGHEST WATER QUALITY The extremely space-saving LaboStar® PRO DI 4 ultrapure water system for the cost-effective production of analytically pure water can be used as a mobile benchtop instrument. The water quality with a conductivity of 0.055 µS/cm, corresponding to 18.2 MΩ-cm, and a TOC content 5-10 ppb exceeds the common quality standards. Deionized water, distilled water or permeate from a reverse osmosis system is required as feed water for the LaboStar PRO DI 4. This is filled manually into the integrated 7 l tank. After refilling the tank, the ultrapure water is available within minutes. In the LaboStar units, a polisher module with a selection of the purest treatment materials ensures the ultrapure water quality. A conductivity measurement in the recirculation constantly monitors the purity of the product water. A 0.2 µm sterile filter with bacterial and endotoxin retention capacity is located on the dispenser. The user can produce water with an endotoxin content of < 0.001 EU/ml without investing in an ultrafilter. A 0.2 µm filter without endotoxin retention is also available. The LaboStar systems are delivered ready to use, including the first set of modules and filters. Technical specifications Ultrapure water specifications: Dispense rate: 1.5 l/min Conductivity at 25ºC: 0.055 µS/cm Resistivity at 25ºC: 18.2 MOhm-cm TOC: 5-10 ppb Bacteria**: < 0,1 CFU/ml Endotoxins**: < 0.001 EU/ml Particulates >0.2 µm/ml: < 1 **with charged sterile filter Feed water specifications: Pressure: 0 bar Conductivity: < 20 µS/cm Colloid index (SDI): < 3 CO2: < 15 mg/l Free Chlorine: < 0.1 mg/l Total Iron: < 0.1 mg/l SiO2: 2 ppm Temperature: 5 - 30ºC Mains input: 100-240 V, 50-60 Hz Power consumption: 270 W Water connection: 1/2'' or 3/4'' female thread Power lead with plug (D;GB;USA): 1.5 m / 1.7 m Dimensions and Weight: Height: 535 mm Width: 400 mm Depth: 520 mm Dispatch weight: 22 kg LaboStar PRO DI 4 -mobile ultra pure water system with 7l-tank, 1,5 l/min HIGHEST WATER QUALITY The extremely space-saving LaboStar® PRO DI 4 ultrapure water system for the cost-effective production of analytically pure water can be used as a mobile benchtop instrument. The water quality with a conductivity of 0.055 µS/cm, corresponding to 18.2 MΩ-cm, and a TOC content 5-10 ppb exceeds the common quality standards. Deionized water, distilled water or permeate from a reverse osmosis system is required as feed water for the LaboStar PRO DI 4. This is filled manually into the integrated 7 l tank. After refilling the tank, the ultrapure water is available within minutes. In the LaboStar units, a polisher module with a selection of the purest treatment materials ensures the ultrapure water quality. A conductivity measurement in the recirculation constantly monitors the purity of the product water. A 0.2 µm sterile filter with bacterial and endotoxin retention capacity is located on the dispenser. The user can produce water with an endotoxin content of < 0.001 EU/ml without investing in an ultrafilter. A 0.2 µm filter without endotoxin retention is also available. The LaboStar systems are delivered ready to use, including the first set of modules and filters. Technical specifications Ultrapure water specifications: Dispense rate: 1.5 l/min Conductivity at 25ºC: 0.055 µS/cm Resistivity at 25ºC: 18.2 MOhm-cm TOC: 5-10 ppb Bacteria**: < 0,1 CFU/ml Endotoxins**: < 0.001 EU/ml Particulates >0.2 µm/ml: < 1 **with charged sterile filter Feed water specifications: Pressure: 0 bar Conductivity: < 20 µS/cm Colloid index (SDI): < 3 CO2: < 15 mg/l Free Chlorine: < 0.1 mg/l Total Iron: < 0.1 mg/l SiO2: 2 ppm Temperature: 5 - 30ºC Mains input: 100-240 V, 50-60 Hz Power consumption: 270 W Water connection: 1/2'' or 3/4'' female thread Power lead with plug (D;GB;USA): 1.5 m / 1.7 m Dimensions and Weight: Height: 535 mm Width: 400 mm Depth: 520 mm Dispatch weight: 22 kg