UltraClear RO 20 Reverse osmosis system Pure-water production from softened or hardness-stabilized drinking water It mainly consists of: 1 solenoid valve for raw water 1 fine filter; housing made of plastic, including active carbon fine filter cartridge AK/5µm, accessible from the front 1 pressure switch for high pressure pump 1 high pressure pump made of Ms, with fittings made of stainless steel, incl. alternating current motor mounted on vibrating dampers 1 manometer indicating operating pressure 1 high performance membrane module made of polyamide on a polysulphone basis, including pressure pipe with end caps 1 solenoid valve to discard permeate when limits are exceeded 1 restriction to limit concentrate quantity 1 electronic control incl. operating field with membrane keyboard integrated in front panel, plain text to display: - conductivity permeate - conductivity post-treatment (if available) - level storage tank, displays in percent 3 selectable values for ON/OFF and dry run protection of external permeate feed pump - status indication by symbols - recommended maintenance intervals and cartridge replacements - German and English language available - failure message displays (lack of raw water, LF1/LF2) - RS 232 interface (processing software optional) 1 set connection hoses 1 operator's manual Technical data: System performance: RO Production rate at 15°C: 20 l/h Ratio permeate/concentrate: 50-75 % Salt retention rate: normally 98 % Salt retention rate: minimum 96 % Rejection rate for bacteria: 95 % Rejection rate for particles: 99 % Feed water specification: Flow rate: max 50 l/h Pressure: 0,1 - 5 bar Condictivity: < 2000 µS/cm CO2: < 15 mg/l Colloid index (SDI): < 3 Free Chlorine: < 0.1 mg/l Total iron: < 0.1 mg/l Water temperature: 5 - 30°C Technical data: Operating pressure: 6 - 12 bar Electrical power: 100-240 VAC, 50-60 Hz Power consumption: 0,2 - 0,35 kW/h Ambient temperature allowed: 5 - 35°C Noise level: 55 dBA Connections: feed water: 5/16 hose permeate: 5/16 hose drain: 5/16 hose flush: 5/16 hose Dimensions and weight: Height: 530 mm Width: 340 mm Depth: 420 mm Dispatch weight: 32 kg Please note: The performance is based on a raw water salt content of max. 1000 mg/l (TDS) equivalent to a conductivity of 2000 µS/cm at 15°C. From 10°dH or higher, a softener is recommended. All a. m. components are assembled into a complete system; the Ultra Clear RO can be fitted and installed without the aid of a factory service engineer. The feed water specifications are guidelines. The pure water specifications can only be guaranteed, if a drinking water analysis is available for the plant location and all other relevant parameters have been evaluated. UltraClear RO 20 Reverse osmosis system Pure-water production from softened or hardness-stabilized drinking water It mainly consists of: 1 solenoid valve for raw water 1 fine filter; housing made of plastic, including active carbon fine filter cartridge AK/5µm, accessible from the front 1 pressure switch for high pressure pump 1 high pressure pump made of Ms, with fittings made of stainless steel, incl. alternating current motor mounted on vibrating dampers 1 manometer indicating operating pressure 1 high performance membrane module made of polyamide on a polysulphone basis, including pressure pipe with end caps 1 solenoid valve to discard permeate when limits are exceeded 1 restriction to limit concentrate quantity 1 electronic control incl. operating field with membrane keyboard integrated in front panel, plain text to display: - conductivity permeate - conductivity post-treatment (if available) - level storage tank, displays in percent 3 selectable values for ON/OFF and dry run protection of external permeate feed pump - status indication by symbols - recommended maintenance intervals and cartridge replacements - German and English language available - failure message displays (lack of raw water, LF1/LF2) - RS 232 interface (processing software optional) 1 set connection hoses 1 operator's manual Technical data: System performance: RO Production rate at 15°C: 20 l/h Ratio permeate/concentrate: 50-75 % Salt retention rate: normally 98 % Salt retention rate: minimum 96 % Rejection rate for bacteria: 95 % Rejection rate for particles: 99 % Feed water specification: Flow rate: max 50 l/h Pressure: 0,1 - 5 bar Condictivity: < 2000 µS/cm CO2: < 15 mg/l Colloid index (SDI): < 3 Free Chlorine: < 0.1 mg/l Total iron: < 0.1 mg/l Water temperature: 5 - 30°C Technical data: Operating pressure: 6 - 12 bar Electrical power: 100-240 VAC, 50-60 Hz Power consumption: 0,2 - 0,35 kW/h Ambient temperature allowed: 5 - 35°C Noise level: 55 dBA Connections: feed water: 5/16 hose permeate: 5/16 hose drain: 5/16 hose flush: 5/16 hose Dimensions and weight: Height: 530 mm Width: 340 mm Depth: 420 mm Dispatch weight: 32 kg Please note: The performance is based on a raw water salt content of max. 1000 mg/l (TDS) equivalent to a conductivity of 2000 µS/cm at 15°C. From 10°dH or higher, a softener is recommended. All a. m. components are assembled into a complete system; the Ultra Clear RO can be fitted and installed without the aid of a factory service engineer. The feed water specifications are guidelines. The pure water specifications can only be guaranteed, if a drinking water analysis is available for the plant location and all other relevant parameters have been evaluated.