Deliver to
United Kingdom
Syringeless filters consisting of a 0.4 ml capacity chamber and a plunger. The plunger contains a filtration membrane at one end and a pre-attached cap / septum at the other. The plunger is pressed through the sample in the outer chamber and positive pressure forces the filtrate into the reservoir of the plunger. Air escapes through the vent hole until the locking ring is engaged providing an air-tight seal. Within seconds the Mini-UniPrep™ can be placed into any approved autosampler for injection into your instrument.The device can be used either manually or with a compressor unit. The multi-compressor can process up to 6 samples at one time, further improving sample processing time and reducing the risk of hand stress. The Mini-UniPrep™ device is designed to fit into any autosampler accommodating 12 x 32 mm vials. Alternatively the septum can be pierced with a needle and the sample drawn off for manual injection into an analyser.- Amber colourant prevents photodegradation of light sensitive samples (e. g. catecholamines, vitamins). Same colourant used in pharmaceutical containers designed to meet USP specifications for light resistance. Translucent amber chamber and plunger enable easy visual inspection.- Slit septum cap enables Mini-UniPrep™ use with current robotics on HPLC instruments for high throughput automation. Durable yet flexible slit septum cap has been specially designed for instruments with sensitive sampling needs. Sample evaporation is minimal.Applications:- Routine HPLC analysis.- Composite assays.- Content uniformity.- Protein precipitation.- Solubility testing.- Dissolution testing.- Sample filtration. Syringeless filters consisting of a 0.4 ml capacity chamber and a plunger. The plunger contains a filtration membrane at one end and a pre-attached cap / septum at the other. The plunger is pressed through the sample in the outer chamber and positive pressure forces the filtrate into the reservoir of the plunger. Air escapes through the vent hole until the locking ring is engaged providing an air-tight seal. Within seconds the Mini-UniPrep™ can be placed into any approved autosampler for injection into your instrument.The device can be used either manually or with a compressor unit. The multi-compressor can process up to 6 samples at one time, further improving sample processing time and reducing the risk of hand stress. The Mini-UniPrep™ device is designed to fit into any autosampler accommodating 12 x 32 mm vials. Alternatively the septum can be pierced with a needle and the sample drawn off for manual injection into an analyser.- Amber colourant prevents photodegradation of light sensitive samples (e. g. catecholamines, vitamins). Same colourant used in pharmaceutical containers designed to meet USP specifications for light resistance. Translucent amber chamber and plunger enable easy visual inspection.- Slit septum cap enables Mini-UniPrep™ use with current robotics on HPLC instruments for high throughput automation. Durable yet flexible slit septum cap has been specially designed for instruments with sensitive sampling needs. Sample evaporation is minimal.Applications:- Routine HPLC analysis.- Composite assays.- Content uniformity.- Protein precipitation.- Solubility testing.- Dissolution testing.- Sample filtration.
Product Detail
Mini-UniPrep™ G2 syringeless filters are preassembled filtration units for removal of particulates from low volume liquid samples. They are primarily designed for sample preparation prior to High Performance Liquid Chromatography (HPLC) / Ultra High Performance Liquid Chromatography (UHPLC). They replace syringe filters, syringes and autosampler vials / septa / caps with a single, disposable unit. Each unit consists of 2 parts: a glass chamber and a plunger with an inner glass reservoir. The design incorporates a filtration membrane on one end of the plunger and a preattached septum cap on the other. By pressing the plunger through a liquid sample contained in the chamber, positive pressure forces the filtrate into the inner reservoir of the plunger. Air escapes through the vent hole until the evaporation seal is engaged, which then provides an airtight seal. The assembled unit can be used with any autosampler that takes standard 12 x 32 mm profile vials. - Constructed with borosilicate glass, designed to maintain the purity of the sample by reducing the exposure of sample solvent to plastic components, which can potentially contaminate the sample. - Amber colourant prevents photodegradation of light sensitive samples (e. g. catecholamines, vitamins). Same colourant used in pharmaceutical containers designed to meet USP specifications for light resistance. Translucent amber chamber and plunger enable easy visual inspection. - Slit septum cap enables Mini-UniPrep™ G2 use with current robotics on HPLC instruments for high throughput automation. Durable yet flexible slit septum cap has been specially designed for instruments with sensitive sampling needs. Sample evaporation is minimal. Mini-UniPrep™ G2 syringeless filters are preassembled filtration units for removal of particulates from low volume liquid samples. They are primarily designed for sample preparation prior to High Performance Liquid Chromatography (HPLC) / Ultra High Performance Liquid Chromatography (UHPLC). They replace syringe filters, syringes and autosampler vials / septa / caps with a single, disposable unit. Each unit consists of 2 parts: a glass chamber and a plunger with an inner glass reservoir. The design incorporates a filtration membrane on one end of the plunger and a preattached septum cap on the other. By pressing the plunger through a liquid sample contained in the chamber, positive pressure forces the filtrate into the inner reservoir of the plunger. Air escapes through the vent hole until the evaporation seal is engaged, which then provides an airtight seal. The assembled unit can be used with any autosampler that takes standard 12 x 32 mm profile vials. - Constructed with borosilicate glass, designed to maintain the purity of the sample by reducing the exposure of sample solvent to plastic components, which can potentially contaminate the sample. - Amber colourant prevents photodegradation of light sensitive samples (e. g. catecholamines, vitamins). Same colourant used in pharmaceutical containers designed to meet USP specifications for light resistance. Translucent amber chamber and plunger enable easy visual inspection. - Slit septum cap enables Mini-UniPrep™ G2 use with current robotics on HPLC instruments for high throughput automation. Durable yet flexible slit septum cap has been specially designed for instruments with sensitive sampling needs. Sample evaporation is minimal.
Product Detail
Syringeless filters consisting of a 0.4 ml capacity chamber and a plunger. The plunger contains a filtration membrane at one end and a pre-attached cap / septum at the other. The plunger is pressed through the sample in the outer chamber and positive pressure forces the filtrate into the reservoir of the plunger. Air escapes through the vent hole until the locking ring is engaged providing an air-tight seal. Within seconds the Mini-UniPrep™ can be placed into any approved autosampler for injection into your instrument.The device can be used either manually or with a compressor unit. The multi-compressor can process up to 6 samples at one time, further improving sample processing time and reducing the risk of hand stress. The Mini-UniPrep™ device is designed to fit into any autosampler accommodating 12 x 32 mm vials. Alternatively the septum can be pierced with a needle and the sample drawn off for manual injection into an analyser.- Amber colourant prevents photodegradation of light sensitive samples (e. g. catecholamines, vitamins). Same colourant used in pharmaceutical containers designed to meet USP specifications for light resistance. Translucent amber chamber and plunger enable easy visual inspection.- Slit septum cap enables Mini-UniPrep™ use with current robotics on HPLC instruments for high throughput automation. Durable yet flexible slit septum cap has been specially designed for instruments with sensitive sampling needs. Sample evaporation is minimal.Applications:- Routine HPLC analysis.- Composite assays.- Content uniformity.- Protein precipitation.- Solubility testing.- Dissolution testing.- Sample filtration. Syringeless filters consisting of a 0.4 ml capacity chamber and a plunger. The plunger contains a filtration membrane at one end and a pre-attached cap / septum at the other. The plunger is pressed through the sample in the outer chamber and positive pressure forces the filtrate into the reservoir of the plunger. Air escapes through the vent hole until the locking ring is engaged providing an air-tight seal. Within seconds the Mini-UniPrep™ can be placed into any approved autosampler for injection into your instrument.The device can be used either manually or with a compressor unit. The multi-compressor can process up to 6 samples at one time, further improving sample processing time and reducing the risk of hand stress. The Mini-UniPrep™ device is designed to fit into any autosampler accommodating 12 x 32 mm vials. Alternatively the septum can be pierced with a needle and the sample drawn off for manual injection into an analyser.- Amber colourant prevents photodegradation of light sensitive samples (e. g. catecholamines, vitamins). Same colourant used in pharmaceutical containers designed to meet USP specifications for light resistance. Translucent amber chamber and plunger enable easy visual inspection.- Slit septum cap enables Mini-UniPrep™ use with current robotics on HPLC instruments for high throughput automation. Durable yet flexible slit septum cap has been specially designed for instruments with sensitive sampling needs. Sample evaporation is minimal.Applications:- Routine HPLC analysis.- Composite assays.- Content uniformity.- Protein precipitation.- Solubility testing.- Dissolution testing.- Sample filtration.
Product Detail
Syringeless filters consisting of a 0.4 ml capacity chamber and a plunger. The plunger contains a filtration membrane at one end and a pre-attached cap / septum at the other. The plunger is pressed through the sample in the outer chamber and positive pressure forces the filtrate into the reservoir of the plunger. Air escapes through the vent hole until the locking ring is engaged providing an air-tight seal. Within seconds the Mini-UniPrep™ can be placed into any approved autosampler for injection into your instrument.The device can be used either manually or with a compressor unit. The multi-compressor can process up to 6 samples at one time, further improving sample processing time and reducing the risk of hand stress. The Mini-UniPrep™ device is designed to fit into any autosampler accommodating 12 x 32 mm vials. Alternatively the septum can be pierced with a needle and the sample drawn off for manual injection into an analyser.- Amber colourant prevents photodegradation of light sensitive samples (e. g. catecholamines, vitamins). Same colourant used in pharmaceutical containers designed to meet USP specifications for light resistance. Translucent amber chamber and plunger enable easy visual inspection.- Slit septum cap enables Mini-UniPrep™ use with current robotics on HPLC instruments for high throughput automation. Durable yet flexible slit septum cap has been specially designed for instruments with sensitive sampling needs. Sample evaporation is minimal.Applications:- Routine HPLC analysis.- Composite assays.- Content uniformity.- Protein precipitation.- Solubility testing.- Dissolution testing.- Sample filtration. Syringeless filters consisting of a 0.4 ml capacity chamber and a plunger. The plunger contains a filtration membrane at one end and a pre-attached cap / septum at the other. The plunger is pressed through the sample in the outer chamber and positive pressure forces the filtrate into the reservoir of the plunger. Air escapes through the vent hole until the locking ring is engaged providing an air-tight seal. Within seconds the Mini-UniPrep™ can be placed into any approved autosampler for injection into your instrument.The device can be used either manually or with a compressor unit. The multi-compressor can process up to 6 samples at one time, further improving sample processing time and reducing the risk of hand stress. The Mini-UniPrep™ device is designed to fit into any autosampler accommodating 12 x 32 mm vials. Alternatively the septum can be pierced with a needle and the sample drawn off for manual injection into an analyser.- Amber colourant prevents photodegradation of light sensitive samples (e. g. catecholamines, vitamins). Same colourant used in pharmaceutical containers designed to meet USP specifications for light resistance. Translucent amber chamber and plunger enable easy visual inspection.- Slit septum cap enables Mini-UniPrep™ use with current robotics on HPLC instruments for high throughput automation. Durable yet flexible slit septum cap has been specially designed for instruments with sensitive sampling needs. Sample evaporation is minimal.Applications:- Routine HPLC analysis.- Composite assays.- Content uniformity.- Protein precipitation.- Solubility testing.- Dissolution testing.- Sample filtration.
Product Detail
Syringeless filters consisting of a 0.4 ml capacity chamber and a plunger. The plunger contains a filtration membrane at one end and a pre-attached cap / septum at the other. The plunger is pressed through the sample in the outer chamber and positive pressure forces the filtrate into the reservoir of the plunger. Air escapes through the vent hole until the locking ring is engaged providing an air-tight seal. Within seconds the Mini-UniPrep™ can be placed into any approved autosampler for injection into your instrument.The device can be used either manually or with a compressor unit. The multi-compressor can process up to 6 samples at one time, further improving sample processing time and reducing the risk of hand stress. The Mini-UniPrep™ device is designed to fit into any autosampler accommodating 12 x 32 mm vials. Alternatively the septum can be pierced with a needle and the sample drawn off for manual injection into an analyser.- Amber colourant prevents photodegradation of light sensitive samples (e. g. catecholamines, vitamins). Same colourant used in pharmaceutical containers designed to meet USP specifications for light resistance. Translucent amber chamber and plunger enable easy visual inspection.- Slit septum cap enables Mini-UniPrep™ use with current robotics on HPLC instruments for high throughput automation. Durable yet flexible slit septum cap has been specially designed for instruments with sensitive sampling needs. Sample evaporation is minimal.Applications:- Routine HPLC analysis.- Composite assays.- Content uniformity.- Protein precipitation.- Solubility testing.- Dissolution testing.- Sample filtration. Syringeless filters consisting of a 0.4 ml capacity chamber and a plunger. The plunger contains a filtration membrane at one end and a pre-attached cap / septum at the other. The plunger is pressed through the sample in the outer chamber and positive pressure forces the filtrate into the reservoir of the plunger. Air escapes through the vent hole until the locking ring is engaged providing an air-tight seal. Within seconds the Mini-UniPrep™ can be placed into any approved autosampler for injection into your instrument.The device can be used either manually or with a compressor unit. The multi-compressor can process up to 6 samples at one time, further improving sample processing time and reducing the risk of hand stress. The Mini-UniPrep™ device is designed to fit into any autosampler accommodating 12 x 32 mm vials. Alternatively the septum can be pierced with a needle and the sample drawn off for manual injection into an analyser.- Amber colourant prevents photodegradation of light sensitive samples (e. g. catecholamines, vitamins). Same colourant used in pharmaceutical containers designed to meet USP specifications for light resistance. Translucent amber chamber and plunger enable easy visual inspection.- Slit septum cap enables Mini-UniPrep™ use with current robotics on HPLC instruments for high throughput automation. Durable yet flexible slit septum cap has been specially designed for instruments with sensitive sampling needs. Sample evaporation is minimal.Applications:- Routine HPLC analysis.- Composite assays.- Content uniformity.- Protein precipitation.- Solubility testing.- Dissolution testing.- Sample filtration.
Product Detail
Syringeless filters consisting of a 0.4 ml capacity chamber and a plunger. The plunger contains a filtration membrane at one end and a pre-attached cap / septum at the other. The plunger is pressed through the sample in the outer chamber and positive pressure forces the filtrate into the reservoir of the plunger. Air escapes through the vent hole until the locking ring is engaged providing an air-tight seal. Within seconds the Mini-UniPrep™ can be placed into any approved autosampler for injection into your instrument.The device can be used either manually or with a compressor unit. The multi-compressor can process up to 6 samples at one time, further improving sample processing time and reducing the risk of hand stress. The Mini-UniPrep™ device is designed to fit into any autosampler accommodating 12 x 32 mm vials. Alternatively the septum can be pierced with a needle and the sample drawn off for manual injection into an analyser.- Amber colourant prevents photodegradation of light sensitive samples (e. g. catecholamines, vitamins). Same colourant used in pharmaceutical containers designed to meet USP specifications for light resistance. Translucent amber chamber and plunger enable easy visual inspection.- Slit septum cap enables Mini-UniPrep™ use with current robotics on HPLC instruments for high throughput automation. Durable yet flexible slit septum cap has been specially designed for instruments with sensitive sampling needs. Sample evaporation is minimal.Applications:- Routine HPLC analysis.- Composite assays.- Content uniformity.- Protein precipitation.- Solubility testing.- Dissolution testing.- Sample filtration. Syringeless filters consisting of a 0.4 ml capacity chamber and a plunger. The plunger contains a filtration membrane at one end and a pre-attached cap / septum at the other. The plunger is pressed through the sample in the outer chamber and positive pressure forces the filtrate into the reservoir of the plunger. Air escapes through the vent hole until the locking ring is engaged providing an air-tight seal. Within seconds the Mini-UniPrep™ can be placed into any approved autosampler for injection into your instrument.The device can be used either manually or with a compressor unit. The multi-compressor can process up to 6 samples at one time, further improving sample processing time and reducing the risk of hand stress. The Mini-UniPrep™ device is designed to fit into any autosampler accommodating 12 x 32 mm vials. Alternatively the septum can be pierced with a needle and the sample drawn off for manual injection into an analyser.- Amber colourant prevents photodegradation of light sensitive samples (e. g. catecholamines, vitamins). Same colourant used in pharmaceutical containers designed to meet USP specifications for light resistance. Translucent amber chamber and plunger enable easy visual inspection.- Slit septum cap enables Mini-UniPrep™ use with current robotics on HPLC instruments for high throughput automation. Durable yet flexible slit septum cap has been specially designed for instruments with sensitive sampling needs. Sample evaporation is minimal.Applications:- Routine HPLC analysis.- Composite assays.- Content uniformity.- Protein precipitation.- Solubility testing.- Dissolution testing.- Sample filtration.
Product Detail
Syringeless filters consisting of a 0.4 ml capacity chamber and a plunger. The plunger contains a filtration membrane at one end and a pre-attached cap / septum at the other. The plunger is pressed through the sample in the outer chamber and positive pressure forces the filtrate into the reservoir of the plunger. Air escapes through the vent hole until the locking ring is engaged providing an air-tight seal. Within seconds the Mini-UniPrep™ can be placed into any approved autosampler for injection into your instrument.The device can be used either manually or with a compressor unit. The multi-compressor can process up to 6 samples at one time, further improving sample processing time and reducing the risk of hand stress. The Mini-UniPrep™ device is designed to fit into any autosampler accommodating 12 x 32 mm vials. Alternatively the septum can be pierced with a needle and the sample drawn off for manual injection into an analyser.- Amber colourant prevents photodegradation of light sensitive samples (e. g. catecholamines, vitamins). Same colourant used in pharmaceutical containers designed to meet USP specifications for light resistance. Translucent amber chamber and plunger enable easy visual inspection.- Slit septum cap enables Mini-UniPrep™ use with current robotics on HPLC instruments for high throughput automation. Durable yet flexible slit septum cap has been specially designed for instruments with sensitive sampling needs. Sample evaporation is minimal.Applications:- Routine HPLC analysis.- Composite assays.- Content uniformity.- Protein precipitation.- Solubility testing.- Dissolution testing.- Sample filtration. Syringeless filters consisting of a 0.4 ml capacity chamber and a plunger. The plunger contains a filtration membrane at one end and a pre-attached cap / septum at the other. The plunger is pressed through the sample in the outer chamber and positive pressure forces the filtrate into the reservoir of the plunger. Air escapes through the vent hole until the locking ring is engaged providing an air-tight seal. Within seconds the Mini-UniPrep™ can be placed into any approved autosampler for injection into your instrument.The device can be used either manually or with a compressor unit. The multi-compressor can process up to 6 samples at one time, further improving sample processing time and reducing the risk of hand stress. The Mini-UniPrep™ device is designed to fit into any autosampler accommodating 12 x 32 mm vials. Alternatively the septum can be pierced with a needle and the sample drawn off for manual injection into an analyser.- Amber colourant prevents photodegradation of light sensitive samples (e. g. catecholamines, vitamins). Same colourant used in pharmaceutical containers designed to meet USP specifications for light resistance. Translucent amber chamber and plunger enable easy visual inspection.- Slit septum cap enables Mini-UniPrep™ use with current robotics on HPLC instruments for high throughput automation. Durable yet flexible slit septum cap has been specially designed for instruments with sensitive sampling needs. Sample evaporation is minimal.Applications:- Routine HPLC analysis.- Composite assays.- Content uniformity.- Protein precipitation.- Solubility testing.- Dissolution testing.- Sample filtration.
Product Detail© 2023 Copyright. All Rights Reserved. Unit 19, Euroway House, Roydsdale Way, Bradford, BD4 6SE, UK
© 2023 Copyright. All Rights Reserved. Unit 19, Euroway House, Roydsdale Way, Bradford, BD4 6SE, UK
