Foils and films

7440-50-8, Carl Roth

Copper foil

0953.1, Carl Roth

Material: aluminium (Aluminium content ≥ 99%). Aluminium foil ROTILABO ® roundings Delivery incl. box, with tissue paper intermediate layer.

YY17.1, Roth Selection

Material: PVC soft. Self-adhesive. For protecting labels, laminating books, warning signs, instructions and similar. High-gloss, transparent, non-yellowing. On siliconised paper with grid (20 mm) for easy cutting to size. Protective film filmolux 609

7440-02-0, Carl Roth

AA77.1, Carl Roth

Material: aluminium (aluminium content ≥99%). For covering, wrapping, insulating. Aluminium foil ROTILABO ® Delivery incl. cutter box.

2271.1, Carl Roth

Material: aluminium (aluminium content ≥99%). Aluminium foil ROTILABO ® sheets Delivery incl. box, with tissue paper intermediate layer.

1YN9.1, Brand

For temporarily sealing beakers, flasks and other vessels. Material thickness: 0.14 ±0.02 mm Elasticity (25 °C): 300% Tear strength (25 °C): 1.5 MPa Melting temperature: >65 °C (151 °F) Boiling point: >288 °C (550 °F) Continuous service temperature: -20 to +46 °C Toxicity: non-toxic The sealing film can be stretched to three times its original length. This means that Seal-R-film™ always fits, even with irregular shapes. Traceability through batch identification per roll. Gas permeability: • CO 2 (carbon dioxide) <1000 cm 3 /m 2 • O 2 (oxygen) <350 cm 3 /m • Water vapour permeability <0.8 g/m 2 (in 24 hours at room temperature and a pressure of 0.1 MPa) Chemical resistance: ammonia (NH 3 ) 28%; ethanol; isopropanol; iodine solution 0.1 mol/l (brown colouring); potassium permanganate (KMnO 4 ) 5% (brown colouring); methanol; sodium chloride (NaCl) 20%; sodium hydroxide (NaOH) 22%; nitric acid (HNO 3 ) 95% (brown colouring); hydrochloric acid (HCl) 36.5%; sulphuric acid (H 2 SO 4 ) 98%; hydrogen peroxide (H 2 0 2 ) 30% Sealing film Seal-R-Film™

1502.1, Carl Roth

Material: aluminium (aluminium content ≥99%). For covering, wrapping, insulating. Aluminium foil ROTILABO ® Delivery incl. cutter box.

H666.1, Amcor

Ideal for sealing vessels, petri dishes, cells, etc. High flexible (stretches up to 200%). Clings even around irregular shapes. The sealing film is free of plasticisers, and consists largely of polyolefins and paraffin waxes Meets the requirements of the FDA when used at temperatures below 55 °C, as well as when GMP (Good Manufacturing Practice) is followed PARAFILM ® M is resistant to many polar substances for up to 48 hours, such as saline solutions, inorganic acids and bases; brittleness may occur after this time Temperature stability: -45 to +50 °C (melting point: 60 °C) Elasticity: 200 % Gas permeability in 24 hours at 23 °C and 50% RH for: Oxygen: 350 cm 3 /m 2 Nitrogen: 105 cm 3 /m 2 Carbon dioxide: 1100 cm 3 /m 2 Water vapour permeability in 24 hours at 37 °C and 90% RH for: 0.8 g/m 2 Sealing film PARAFILM ® M

1255.1, Roth Selection

Material: LDPE. For wrapping and covering vessels. Fully transparent Extremely flexible Waterproof and greaseproof Temperature stability: -20 to +70 °C Adhesive film Delivery incl. cutter box.

7439-92-1, Carl Roth

226Y.1, Carl Roth

Material: aluminium (aluminium content ≥99%). Aluminium foil ROTILABO ® sheets Delivery incl. box, with tissue paper intermediate layer.