Deliver to United Kingdom
0
Products Found: 106
Showing Results For: Glass and quartz fibre filters

Glass and quartz fibre filters



New Items
New
EN12.1, Macherey-Nagel

EN12.1, Macherey-Nagel

Material: quartz glass (fibres). Autoclavable: yes. Made from pure quartz fibres, without binding agent. High chemical resistance to organic and inorganic solvents, acids (except hydrofluoric acid) and alkalis. For filtration of aggressive media in trace analytics, emissions control, airborne dust analytics, etc. Extremely low metallic trace element content. Filtration speed (according to DIN 53137): <5 s Surface weight: 85 g/m 2 Retention range: Up to 0.3 µm Temperature stable up to 950 °C Thickness: 0.46 mm Quartz fibre round filters MN QF-10

Product Detail
New
1XU6.1, Carl Roth

1XU6.1, Carl Roth

Material: borosilicate glass (fibres), 100%. Free from binding agent, with fast flow rates, high load-capacity and exceptional retention. Temperature of use max. 500 °C. Glass fibre round filters ROTILABO ® Type CR261 Filtration speed according to Herzberg: 100 s. Surface weight: 52 g/m². Retention range: up to 1.2 μm. Thickness: 0.26 mm.

Product Detail
New
EN29.1, Macherey-Nagel

EN29.1, Macherey-Nagel

Material: borosilicate glass (fibres), organic binding agent. For fast filtration with simultaneously high retention. Very good resistance to most organic and inorganic solvents (not resistant to hydrofluoric acid). Filtration speed, air: 15 s Surface weight: 70 g/m 2 Retention range: ≥0,6 µm Thickness: 0.35 mm Glass fibre round filters Type: MN 85/70 Most commonly used glass fibre filter with high mechanical stability for general use. Temperature stable up to 200 °C.

Product Detail
New
AY39.1, Cytiva

AY39.1, Cytiva

Material: borosilicate glass (fibres), inorganic binding agent. Chemically resistant to the majority of organic and inorganic solvents, aggressive chemicals and highly concentrated bases (not resistant to hydrofluoric acid) Constant weight, negligible influence on fluctuations in ambient humidity Mechanically stable (limited bending resistance) Note: filter units and clamping fixtures must have flexible sealing surfaces. Glass fibre round filters Type GF 6 Applications: environmental analysis, biology, physics, drinks industry. Use: gas/air monitoring, water and waste water tests, scintillation measurements, dry mass determinations. Filtration speed: low Retention rate: 99.97% Retention range: <1 µm Surface weight: 80 g/m 2 Thickness: 0.35 mm

Product Detail
New
1P1X.1, Macherey-Nagel

1P1X.1, Macherey-Nagel

Material: borosilicate glass (fibres), organic binding agent. For fast filtration with simultaneously high retention. Very good resistance to most organic and inorganic solvents (not resistant to hydrofluoric acid). Filtration speed, air: 15 s Surface weight: 70 g/m 2 Retention range: ≥0,6 µm Thickness: 0.35 mm Glass fibre round filters Type: MN 85/70 Most commonly used glass fibre filter with high mechanical stability for general use. Temperature stable up to 200 °C.

Product Detail
New
HTL3.1, Roth Selection

HTL3.1, Roth Selection

Material: borosilicate glass (fibres), 100%. Free from binding agent, with fast flow rates, high load-capacity and exceptional retention. Max. application temperature 500 °C. Glass fibre round filters ROTILABO ® Type: CR259 Filtration speed according to Herzberg: 60 s. Surface weight: 52 g/m². Retention range: up to 1.6 μm. Thickness: 0.26 mm

Product Detail
New
1XUP.1, Carl Roth

1XUP.1, Carl Roth

Material: borosilicate glass (fibres), 100%. Free from binding agent, with fast flow rates, high load-capacity and exceptional retention. Temperature of use max. 500 °C. Glass fibre round filters ROTILABO ® Type CR259 Filtration speed according to Herzberg: 60 s. Surface weight: 52 g/m². Retention range: up to 1.6 μm. Thickness: 0.26 mm.

Product Detail
New
29XL.1, Macherey-Nagel

29XL.1, Macherey-Nagel

Material: borosilicate glass microfibres, binder-free, white. MN GF-5 is a binder-free glass fibre filter with very good retention capacity for fine particles. When used as a pre-filter, it protects membranes from clogging. Suitable for the filtration of finely precipitated proteins and for the clarification of nucleic acids as well as for the filtration of organic and inorganic substances. Recommended for filtration when determining the organic substances in the eluate of the shaking method according to DIN 19529:2023-07 (Mantelverordnung für Ersatzbaustoffe und Bodenschutz). Filtration speed (air): 80 s Surface weight: 85 g/m² Retention: ≥0.4 µm Temperature stable up to 500 °C Thickness: 0.4 mm Surface: smooth Glass fibre round filters MN GF-5

Product Detail
New
HTK9.1, Roth Selection

HTK9.1, Roth Selection

Material: borosilicate glass (fibres), 100%. Free from binding agent, with fast flow rates, high load-capacity and exceptional retention. Max. application temperature 500 °C. Glass fibre round filters ROTILABO ® Type: CR259 Filtration speed according to Herzberg: 60 s. Surface weight: 52 g/m². Retention range: up to 1.6 μm. Thickness: 0.26 mm

Product Detail
New
AY49.1, Cytiva

AY49.1, Cytiva

Material: borosilicate glass (fibres), inorganic binding agent. Chemically resistant to the majority of organic and inorganic solvents, aggressive chemicals and highly concentrated bases (not resistant to hydrofluoric acid) Constant weight, negligible influence on fluctuations in ambient humidity Mechanically stable (limited bending resistance) Note: filter units and clamping fixtures must have flexible sealing surfaces. Glass fibre round filters Type GF 6 Applications: environmental analysis, biology, physics, drinks industry. Use: gas/air monitoring, water and waste water tests, scintillation measurements, dry mass determinations. Filtration speed: low Retention rate: 99.97% Retention range: <1 µm Surface weight: 80 g/m 2 Thickness: 0.35 mm

Product Detail
New
1XU7.1, Carl Roth

1XU7.1, Carl Roth

Material: borosilicate glass (fibres), 100%. Free from binding agent, with fast flow rates, high load-capacity and exceptional retention. Temperature of use max. 500 °C. Glass fibre round filters ROTILABO ® Type CR261 Filtration speed according to Herzberg: 100 s. Surface weight: 52 g/m². Retention range: up to 1.2 μm. Thickness: 0.26 mm.

Product Detail
New
EN19.1, Macherey-Nagel

EN19.1, Macherey-Nagel

Material: borosilicate glass (fibres), organic binding agent. For fast filtration with simultaneously high retention. Very good resistance to most organic and inorganic solvents (not resistant to hydrofluoric acid). Filtration speed, air: 15 s Surface weight: 70 g/m 2 Retention range: ≥0,6 µm Thickness: 0.35 mm Glass fibre round filters Type: MN 85/70 Most commonly used glass fibre filter with high mechanical stability for general use. Temperature stable up to 200 °C.

Product Detail
allied chemi
  • secure-payment
  • visa
  • american-express
  • master-card

© 2026 Copyright. All Rights Reserved.