Electric burners

P910.1, Edmund

Infrared heater for high temperatures up to 900 °C . With integrated output control , for variable adjustment between 0 and 100%. Fast and even heating with no open flame . Electronic parts are protected against overflowing liquids. Additional side protection of the burner. With ceramic heating element and protection against overheating. Safe-to-touch housing. Integrated handholds for safe transport. Connection values: 800 W/230 V. Dimensions: W 150 mm x D 150 mm x H 170 mm, weight approx. 2250 g. Infrared burner IRB 2 Delivery incl. cross recess enables flat vessels to be laid directly on the heating element.

L489.1, Edmund

YL73.1, Electrothermal

Suitable for laboratories in which no gas and naked flames are allowed to be used. Ideal for heating test tubes, crucibles, small bottles and beakers. Max. temperature of 800 °C. The ceramic heating element is located in the upper part of the stainless steel cylinder. 80% of max. temperature is reached in approx. 4 min and maximum temperature is reached in approx. 12 min. Heating element: inner dimensions (Ø x H): 60 x 45 mm, chimney: outer dimensions (Ø x H): 120 x 180 mm Heat output regulator CN-200 : with special sleeve for attaching a stand rod (max. Ø 12.5 mm) and indicator lights for "Power On" and "Output regulator operation". Dimensions of heat output regulator (W x D x H): 95 x 130 x 105 mm. Electrical Bunsen burners BB-200-CN Delivery incl. heat output regulator CN-200.

KL88.1, Wld-Tec

For annealing inoculation loops, needles and instruments. For laboratories and safety work benches, in which gas and naked flames are not allowed to be used. The inoculation loop is held in the quartz glass annealing tube for annealing. The inoculation loop is sterilised after approx. 5-7 s. Made of stainless steel Residual heat display warns users of high temperatures With adjustment at seven angles Integrated splash guard Storage for three instruments Infrared sterilising station SteriMax series

LH89.1, Wld-Tec

For annealing inoculation loops, needles and instruments. For laboratories and safety work benches, in which gas and naked flames are not allowed to be used. The inoculation loop is held in the quartz glass annealing tube for annealing. The inoculation loop is sterilised after approx. 5-7 s. Made of stainless steel Residual heat display warns users of high temperatures With adjustment at seven angles Integrated splash guard Storage for three instruments Infrared sterilising station SteriMax series

L487.1, Edmund

Compact and highly efficient thanks to IR emitter technology. Ideal for fast, contactless heating tasks in laboratories, factories and schools. On/off switch with indicator light. Housing remains cool. Infrared emitter element has a long service life. Additional output regulator available. Max. temperature of the heating surface is 750 °C. Connection values: 250 W, 230 V. Dimensions: L 100 mm x W 100 mm x H 100 mm, weight 850 g. Infrared burner IRB 1

L488.1, Edmund

ACN7.1, Wld-Tec

Specially focussed infrared light creates an IR hotspot and sterilises inoculation loops at a temperature from 750 to 1000 °C within 5-10 s. Auto start by non-contact IR sensor technology Adjustable sterilisation and cool-down timer for two users via touch operation Ready for use straight from the box without heat-up phase Dynamic Thermocontrol sterilisation timer for the utilisation of residual heat to speed up subsequent sterilisation cycles Housing made of special toughened glass and stainless steel With removable quartz glass annealing tube Infrared inoculation loop steriliser SteriMax smart Delivery incl. quartz glass annealing tube, inoculation loop holder with inoculation loop Ø 3 mm and holders for three inoculation loop holders.