Deliver to
United Kingdom
For the reliable monitoring of dry and moist surfaces as well as solutions in the manufacturing industry, in the food and feed sector, in patient care and nursing, in gastronomy and trade, in training and in many other areas. All the advantages at a glance: Quick and easy sampling Simple and fast measurement within seconds Sensitive and reproducible measurement Measurement of all forms - ATP, ADP and AMP Please note LuciPac ® A3 is not suitable for the detection of virus contamination. Why A3 assay (ATP+ADP+AMP)? A3 detects ATP+ADP+AMP offering higher sensitivity to find microorganisms and biofilms that others miss. Just as fast and easy to use as conventional tests, but its advanced chemistry produces superior detection to uncover contaminants that you may be missing. LuciPac ® A3 for hygiene control of surfaces Directions for use Remove the cotton swab (green holder) from the tube. Moisten the cotton swab with tap water if the surface is completely dry. Wipe the object/the surface. An area of approx. 10 x 10 cm 2 is recommended for optimum results. Put the cotton swab back into the tube. Then press the stick down to open the reaction capsule. Shake the LuciPac ® A3 horizontally several times so that all the liquid flows into the lower reaction capsule. Insert the entire LuciPac ® A3 into the measuring chamber of the Lumitester PD20/ PD30 or Smart and close the measuring chamber cover. Press the ENTER key on the control panel to start the measurement process. The measurement results are displayed after 10 seconds. Remove the sleeve of the LuciPac ® A3 from the measuring chamber.
Product Detail
For the reliable monitoring of dry and moist surfaces as well as solutions in the manufacturing industry, in the food and feed sector, in patient care and nursing, in gastronomy and trade, in training and in many other areas. All the advantages at a glance: Quick and easy sampling Simple and fast measurement within seconds Sensitive and reproducible measurement Measurement of all forms - ATP, ADP and AMP Please note LuciPac ® A3 is not suitable for the detection of virus contamination. Why A3 assay (ATP+ADP+AMP)? A3 detects ATP+ADP+AMP offering higher sensitivity to find microorganisms and biofilms that others miss. Just as fast and easy to use as conventional tests, but its advanced chemistry produces superior detection to uncover contaminants that you may be missing. LuciPac ® A3 Aqua for hygiene control of liquids Directions for use Remove the sample collector (green holder) from the tube. Dip the red comb into the liquid to be analysed. Put the sample collector back into the tube. Then press the pin downwards to open the reaction capsule. Shake the LuciPac ® A3 Aqua horizontally several times so that all the liquid flows into the lower reaction capsule. Insert the entire LuciPac ® A3 Aqua into the measuring chamber of the Lumitester PD20/ PD30 or SMART and close the measuring chamber cover. Press the ENTER key on the control panel to start the measurement process. The measurement results are displayed after 10 seconds. Remove the sleeve of the LuciPac ® A3 Aqua from the measuring chamber.
Product Detail
The Lumitester LED control swab, once charged, produces a stable, exactly defined and calibrate light signal that can be used check the functioning of the Lumitester PD20 or PD30. The product illustration shows the LED control swab (back) in comparison with a LuciPac ® Pen sampling tube. Immediately before checking the Lumitester, connect the LED control swab to the power supply using the supplied charging cable and charge for 30 to 60 seconds. Then disconnect the LED control swab from the power supply and insert the LuciPac ® Pen sampling tube into the cleaned measuring chamber of the Lumitester. The luminous energy emission is measured by pressing the Enter button. Comparing the measurement result with the printed information indicates the condition of the unit. If the nominal value of 80 to 120 % is achieved, the Lumitester is in perfect working order. If not, please contact us to have the Lumitester and control swab recalibrated. Lumitester LED Control Swab
Product Detail
Easy-to-use, lightweight luminometer for ATP measurement. For reliable monitoring of liquids, dry and wet surfaces as part of hygiene control in the manufacturing sector, in the foodstuffs and animal feed sector, in patients- and health care, in gastronomy and trade, in training and in many other areas. Lumitester SMART is not suitable for the detection of virus contamination. Fast and easy handling Lightweight and easy-to-use Highly sensitive, precise measurement of ATP, ADP and AMP Ready for use after 8 seconds Auto-calibration Definition of own limit values is possible Storage of the measurement results in the cloud Date and time internal to the device General properties: Hygiene monitoring in three simple steps Data visualization via App Access from anywhere with cloud storage Mechanism ATP (adenosine triphosphate), ADP (adenosine diphosphate) and the more stable form AMP (adenosine monophosphate) are found in all living cells and, therefore, provide an exact and quantitative marker for the presence of bacteria, fungi or food residue. An enzyme/substrate complex in the LuciPac ® sampling tube reacts with ATP, ADP and AMP to release bioluminescence whose intensity correlates directly with the quantity of ATP/ADP/AMP present. The Lumitester SMART fully converts this bioluminescence into a measurement result and is, therefore, the most sensitive measuring system available today. Thus, liquids and surfaces can be quickly and easily tested for contamination by foodstuffs and microorganisms using the Lumitester SMART and the LuciPac ® sampling pen. Within approximately 30 seconds, the Lumitester SMART can provide information on hygiene status or the efficiency of cleaning and disinfection procedures. The system is easy and safe to operate, even by non-professionals. Simply insert the sampling tube and close the unit. Then press the Enter button, and the measurement result will be displayed within 10 seconds. Suitable for use with LuciPac ® Pen Aqua (Art. No. NC58) and LuciPac ® A3 Aqua (Art. No. 1ENK) for monitoring liquids or with LuciPac ® Pen (Art. No. NC59) and LuciPac ® A3 (Art. No. 1ENH) for the analysis of surfaces. Lumitester SMART Connecting the device to a smartphone, tablet and/or PC allows measurement data to be stored in the cloud for analysis, graphing and sharing across multiple smart devices. Please note Lumitester SMART is not suitable for the detection of virus contamination. Delivery incl. 2 alkaline batteries (AA), 3 cleaning brushes, USB-Cable, strap, quick guide Please order separately: LuciPac ® Pen Aqua (Order No.No. NC58), LuciPac ® Pen (Order No. NC59), LuciPac ® A3 Aqua (Order No. 1ENK), LuciPac ® A3 (Order No. 1ENH) and Lumitester LED Test Stick (Order No. NC60.1).
Product Detail
For the reliable monitoring of dry and moist surfaces as well as solutions in the manufacturing industry, in the food and feed sector, in patient care and nursing, in gastronomy and trade, in training and in many other areas. All the advantages at a glance: Quick and easy sampling Simple and fast measurement within seconds Sensitive and reproducible measurement Measurement of all forms - ATP, ADP and AMP Please note LuciPac ® A3 is not suitable for the detection of virus contamination. Why A3 assay (ATP+ADP+AMP)? A3 detects ATP+ADP+AMP offering higher sensitivity to find microorganisms and biofilms that others miss. Just as fast and easy to use as conventional tests, but its advanced chemistry produces superior detection to uncover contaminants that you may be missing. LuciPac ® A3 Aqua for hygiene control of liquids Directions for use Remove the sample collector (green holder) from the tube. Dip the red comb into the liquid to be analysed. Put the sample collector back into the tube. Then press the pin downwards to open the reaction capsule. Shake the LuciPac ® A3 Aqua horizontally several times so that all the liquid flows into the lower reaction capsule. Insert the entire LuciPac ® A3 Aqua into the measuring chamber of the Lumitester PD20/ PD30 or SMART and close the measuring chamber cover. Press the ENTER key on the control panel to start the measurement process. The measurement results are displayed after 10 seconds. Remove the sleeve of the LuciPac ® A3 Aqua from the measuring chamber.
Product Detail
For the reliable monitoring of dry and moist surfaces as well as solutions in the manufacturing industry, in the food and feed sector, in patient care and nursing, in gastronomy and trade, in training and in many other areas. All the advantages at a glance: Quick and easy sampling Simple and fast measurement within seconds Sensitive and reproducible measurement Measurement of all forms - ATP, ADP and AMP Please note LuciPac ® A3 is not suitable for the detection of virus contamination. Why A3 assay (ATP+ADP+AMP)? A3 detects ATP+ADP+AMP offering higher sensitivity to find microorganisms and biofilms that others miss. Just as fast and easy to use as conventional tests, but its advanced chemistry produces superior detection to uncover contaminants that you may be missing. LuciPac ® A3 for hygiene control of surfaces Directions for use Remove the cotton swab (green holder) from the tube. Moisten the cotton swab with tap water if the surface is completely dry. Wipe the object/the surface. An area of approx. 10 x 10 cm 2 is recommended for optimum results. Put the cotton swab back into the tube. Then press the stick down to open the reaction capsule. Shake the LuciPac ® A3 horizontally several times so that all the liquid flows into the lower reaction capsule. Insert the entire LuciPac ® A3 into the measuring chamber of the Lumitester PD20/ PD30 or Smart and close the measuring chamber cover. Press the ENTER key on the control panel to start the measurement process. The measurement results are displayed after 10 seconds. Remove the sleeve of the LuciPac ® A3 from the measuring chamber.
Product Detail© 2023 Copyright. All Rights Reserved. Unit 19, Euroway House, Roydsdale Way, Bradford, BD4 6SE, UK
© 2023 Copyright. All Rights Reserved. Unit 19, Euroway House, Roydsdale Way, Bradford, BD4 6SE, UK
