Deliver to
United Kingdom
Hot End with Brass Nozzle Raise3D original part: The replaceable hot end with brass nozzle can be installed and removed quickly using the lever. No tools are required to replace the hot end. Suitable for: Raise3D Pro3 HS Raise3D Pro3 Directions for use When replacing the spare part, please follow the application instructions in the Support Center on the Raise3D website.
Product Detail
Steel Nozzle with WS2 Coating Raise3D original part WS2 coated nozzle is designed for composite filaments with abrasive additives and fillers, such as carbon fiber, ceramic, metal, etc. It is very suitable for fiber reinforced filament with optimized melt flow and durability. Raise3D Pro3 HS Raise3D Pro3 Raise3D Pro2 Raise3D E2 Directions for use When replacing the spare part, please follow the application instructions in the Support Center on the Raise3D website.
Product Detail
V3H nozzle Raise3D original part: The V3H nozzle is made of hardened steel. This makes it particularly suitable for abrasive filaments. Suitable for: Raise3D Pro3 HS Raise3D Pro3 Raise3D Pro2 Raise3D E2 Directions for use When replacing the spare part, please follow the application instructions in the Support Center on the Raise3D website.
Product Detail
Build Plate With Protector Raise3D original part: This built plate with handle is held on the printing plate by magnets. It serves as the printing bed base and can be covered with the matching Buildtak printing film. Suitable for: Raise3D Pro3 HS Raise3D Pro3 Directions for use When replacing the spare part, please follow the application instructions in the Support Center on the Raise3D website.
Product Detail
V3H nozzle Raise3D original part: The V3H nozzle is made of hardened steel. This makes it particularly suitable for abrasive filaments. Suitable for: Raise3D Pro3 HS Raise3D Pro3 Raise3D Pro2 Raise3D E2 Directions for use When replacing the spare part, please follow the application instructions in the Support Center on the Raise3D website.
Product Detail
V3H nozzle Raise3D original part: The V3H nozzle is made of hardened steel. This makes it particularly suitable for abrasive filaments. Suitable for: Raise3D Pro3 HS Raise3D Pro3 Raise3D Pro2 Raise3D E2 Directions for use When replacing the spare part, please follow the application instructions in the Support Center on the Raise3D website.
Product Detail
Brass nozzle V3 Raise3D original part: Brass Nozzle V3 Suitable for: Raise3D Pro3 HS Raise3D Pro3 Raise3D Pro2 Raise3D E2 Directions for use When replacing the spare part, please follow the application instructions in the Support Center on the Raise3D website.
Product Detail
Hot end with SiC nozzle Raise3D original part: The replaceable hot end with silicon carbide nozzle can be quickly installed and removed using the lever. No tools are required to replace the hot end. Suitable for: Raise3D Pro3 HS Raise3D Pro3 Directions for use When replacing the spare part, please follow the application instructions in the Support Center on the Raise3D website.
Product Detail
Steel Nozzle with WS2 Coating Raise3D original part WS2 coated nozzle is designed for composite filaments with abrasive additives and fillers, such as carbon fiber, ceramic, metal, etc. It is very suitable for fiber reinforced filament with optimized melt flow and durability. Raise3D Pro3 HS Raise3D Pro3 Raise3D Pro2 Raise3D E2 Directions for use When replacing the spare part, please follow the application instructions in the Support Center on the Raise3D website.
Product Detail
PEI build plate with handle (for Raise3D E2 & E2CF) The PEI build plate (only for E2 and E2CF) is made of a high-strength spring steel sheet with a double-sided PEI powder coating. It features high temperature resistance, excellent flame-retardant properties, and high strength and rigidity. Suitable for: Raise3D E2 Raise3D E2CF Please note After attaching the PEI build plate, please calibrate the nozzle height.Follow the detailed instructions on the Raise3D website.Do not use a spatula or scraper to remove the model, as this may scratch the PEI surface or damage the coating. Advantages: Double-sided PEI coating – both sides are printable and exceptionally durable. High temperature resistance, excellent flame-retardant properties, and high strength. Compatible with a wide range of materials. Directions for use For printing with Raise3D Industrial PET CF filament, it is recommended to use a suitable adhesive.For printing with Raise3D Industrial PETG ESD filament, it is recommended to use item 372Y.1 as the build plate.
Product Detail
PEI build plate with handle (for Raise3D Pro3 & Pro3 HS) The PEI build plate (only for Pro3 and Pro3 HS) is made of a high-strength spring steel sheet with a double-sided PEI powder coating. It features high temperature resistance, excellent flame-retardant properties, and high strength and rigidity. Suitable for: Raise3D Pro3 HS Raise3D Pro3 Please note After attaching the PEI build plate, please calibrate the nozzle height.Follow the detailed instructions on the Raise3D website.Do not use a spatula or scraper to remove the model, as this may scratch the PEI surface or damage the coating. Advantages: Double-sided PEI coating – both sides are printable and exceptionally durable. High temperature resistance, excellent flame-retardant properties, and high strength. Compatible with a wide range of materials. Directions for use For printing with Raise3D Industrial PET CF filament, it is recommended to use a suitable adhesive.For printing with Raise3D Industrial PETG ESD filament, it is recommended to use item 372Y.1 as the build plate.
Product Detail
Buildtak Printing Surface Raise3D original part: The Buildtak foil is glued to the printing plate and offers ideal support for various materials. Suitable for: Raise3D Pro3 HS Raise3D Pro3 Directions for use When replacing the spare part, please follow the application instructions in the Support Center on the Raise3D website.
Product Detail
Hot End with Brass Nozzle Raise3D original part: The replaceable hot end with brass nozzle can be installed and removed quickly using the lever. No tools are required to replace the hot end. Suitable for: Raise3D Pro3 HS Raise3D Pro3 Directions for use When replacing the spare part, please follow the application instructions in the Support Center on the Raise3D website.
Product Detail
V3H nozzle Raise3D original part: The V3H nozzle is made of hardened steel. This makes it particularly suitable for abrasive filaments. Suitable for: Raise3D Pro3 HS Raise3D Pro3 Raise3D Pro2 Raise3D E2 Directions for use When replacing the spare part, please follow the application instructions in the Support Center on the Raise3D website.
Product Detail
V3H nozzle Raise3D original part: The V3H nozzle is made of hardened steel. This makes it particularly suitable for abrasive filaments. Suitable for: Raise3D Pro3 HS Raise3D Pro3 Raise3D Pro2 Raise3D E2 Directions for use When replacing the spare part, please follow the application instructions in the Support Center on the Raise3D website.
Product Detail
Build Plate With Protector Raise3D original part: This built plate with handle is held on the printing plate by magnets. It serves as the printing bed base and can be covered with the matching Buildtak printing film. Suitable for: Raise3D Pro3 HS Raise3D Pro3 Directions for use When replacing the spare part, please follow the application instructions in the Support Center on the Raise3D website.
Product Detail
V3H nozzle Raise3D original part: The V3H nozzle is made of hardened steel. This makes it particularly suitable for abrasive filaments. Suitable for: Raise3D Pro3 HS Raise3D Pro3 Raise3D Pro2 Raise3D E2 Directions for use When replacing the spare part, please follow the application instructions in the Support Center on the Raise3D website.
Product Detail
Steel Nozzle with WS2 Coating Raise3D original part WS2 coated nozzle is designed for composite filaments with abrasive additives and fillers, such as carbon fiber, ceramic, metal, etc. It is very suitable for fiber reinforced filament with optimized melt flow and durability. Raise3D Pro3 HS Raise3D Pro3 Raise3D Pro2 Raise3D E2 Directions for use When replacing the spare part, please follow the application instructions in the Support Center on the Raise3D website.
Product Detail
V3H nozzle Raise3D original part: The V3H nozzle is made of hardened steel. This makes it particularly suitable for abrasive filaments. Suitable for: Raise3D Pro3 HS Raise3D Pro3 Raise3D Pro2 Raise3D E2 Directions for use When replacing the spare part, please follow the application instructions in the Support Center on the Raise3D website.
Product Detail
MK4S to Prusa CORE One+ Conversion kit The Original Prusa MK4S can be converted into the fully enclosed CoreXY 3D printer Prusa CORE One+ using the upgrade kit. After the conversion, the printer is faster, requires less space, has a larger build volume, and can process demanding filaments such as PCCF or Nylon without warping. The upgrade kit contains all necessary parts for the conversion. Many components of the MK4S, such as build plates, hotends, nozzles, and other parts, can still be used. The upgrade kit is compatible only with the MK4S. The silver power supply is not compatible. xLCD Display Information Before ordering the upgrade, check which xLCD display is installed in your MK4S printer. This information is important to choose the correct upgrade. Depending on the installed version, you will receive different components included for the conversion.
Product Detail
Hot End with Brass Nozzle Raise3D original part: The replaceable hot end with brass nozzle can be installed and removed quickly using the lever. No tools are required to replace the hot end. Suitable for: Raise3D Pro3 HS Raise3D Pro3 Directions for use When replacing the spare part, please follow the application instructions in the Support Center on the Raise3D website.
Product Detail
Steel Nozzle with WS2 Coating Raise3D original part WS2 coated nozzle is designed for composite filaments with abrasive additives and fillers, such as carbon fiber, ceramic, metal, etc. It is very suitable for fiber reinforced filament with optimized melt flow and durability. Raise3D Pro3 HS Raise3D Pro3 Raise3D Pro2 Raise3D E2 Directions for use When replacing the spare part, please follow the application instructions in the Support Center on the Raise3D website.
Product Detail
spare part Raise3D original part: This low printer cart is particularly suitable for the higher Plus models of the Pro3 and Pro3 HS series. However, the E2 and E2CF models can also be placed on the cart. Suitable for: Raise3D Pro3 HS-Serie Raise3D Pro3-Serie Raise3D E2 und E2CF
Product Detail
Hot end with SiC nozzle Raise3D original part: The replaceable hot end with silicon carbide nozzle can be quickly installed and removed using the lever. No tools are required to replace the hot end. Suitable for: Raise3D Pro3 HS Raise3D Pro3 Directions for use When replacing the spare part, please follow the application instructions in the Support Center on the Raise3D website.
Product Detail© 2023 Copyright. All Rights Reserved. Unit 19, Euroway House, Roydsdale Way, Bradford, BD4 6SE, UK
© 2023 Copyright. All Rights Reserved. Unit 19, Euroway House, Roydsdale Way, Bradford, BD4 6SE, UK
