Deliver to
United Kingdom
The QUICKTEST 38 ® and the RAPIDTEST 38 ® can be used to determine to what extent the pretreatment of polyolefins (polypropylene, polyethylene, polybutylene) has shown an effect.The liquid contained in the pen remains as a continuous line at a surface tension value of 38 mN/m or greater, below that it rolls off. The line applied with QUICKTEST 38 ® or RAPIDTEST 38 ® dries in a matter of seconds and no longer needs to be wiped off. Advantages: Extremely easy to handle Perfect for quick checks No wiping off necessary Lasting display of result Archiving of test result possible ATTENTION: The test liquid of QUICKTEST 38 ® and RAPIDTEST 38 ® contains solvents. Solvent-sensitive materials (e.g. PS) can be attacked by this, which can lead to misinterpretation! RAPIDTEST 38 ® arcotest ® , green Not toxic to aquatic organisms Does not cause eye damage Not harmful to health
Product Detail
Transport case for test inks Transport case large, blue: for 24 test ink bottles of 10 ml each. Without content Transport case small, blue: for 7 test ink bottles of 10 ml each, with compartment for pens (set of 4) or cotton buds, without contents. Transport case small, green: for 7 test ink bottles of 10 ml each, with compartment for pens (set of 4) or cotton buds, without contents. Plastic made from 70 % renewable raw material, similar to PP, recyclable.
Product Detail
Transport case for test inks Transport case large, blue: for 24 test ink bottles of 10 ml each. Without content Transport case small, blue: for 7 test ink bottles of 10 ml each, with compartment for pens (set of 4) or cotton buds, without contents. Transport case small, green: for 7 test ink bottles of 10 ml each, with compartment for pens (set of 4) or cotton buds, without contents. Plastic made from 70 % renewable raw material, similar to PP, recyclable.
Product Detail
Test inks can provide information about the adhesive strength of printing inks, paints and adhesives on all surfaces such as plastic, metal and glass and about the degree of cleanliness in mN/m (dyne/cm). The arcotest ® ORGANIC test inks are test liquids with a defined surface tension that are coloured. They have been specially developed to offer non-toxic and non-labelling inks. The application and handling of arcotest ® ORGANIC is based on DIN 53364 and ISO 8296. Result: If the edges of the cotton swab or pencil application contract within 2 seconds, repeat the measurement with the next lowest value. If the edges run outwards, repeat the measurement with the next highest value. The surface tension is reached when the line remains in place for just 2 seconds. Shelf life 1 year unopened, 6 months after opening. Individual components of the test inks evaporate to varying degrees. Close bottles and pens tightly after use. Test Inks arcotest ® arcoweb ® , green The arcoweb ® wipes are intended for single use. They are sealed in paper-aluminium composite packaging. This prevents the ink from flowing due to large quantities. Appropriate handling ensures that no ink is spilled and that hands are not stained by the green ink. The test ink contained is non-hazardous, non-toxic and non-hazardous to health in accordance with the Hazardous Substances Regulation (EC) No. 1272/2008. Observation time: 2 s Accuracy: ±1 mN/m Properties: Ideal for large areas Easy handling Not toxic, harmful to health or the environment Constantly low application quantity No spillage Result visible within 2 seconds Application width 25 mm
Product Detail
The QUICKTEST 38 ® and the RAPIDTEST 38 ® can be used to determine to what extent the pretreatment of polyolefins (polypropylene, polyethylene, polybutylene) has shown an effect.The liquid contained in the pen remains as a continuous line at a surface tension value of 38 mN/m or greater, below that it rolls off. The line applied with QUICKTEST 38 ® or RAPIDTEST 38 ® dries in a matter of seconds and no longer needs to be wiped off. Advantages: Extremely easy to handle Perfect for quick checks No wiping off necessary Lasting display of result Archiving of test result possible ATTENTION: The test liquid of QUICKTEST 38 ® and RAPIDTEST 38 ® contains solvents. Solvent-sensitive materials (e.g. PS) can be attacked by this, which can lead to misinterpretation! RAPIDTEST 38 ® arcotest ® , green Not toxic to aquatic organisms Does not cause eye damage Not harmful to health
Product Detail
Test inks can provide information about the adhesive strength of printing inks, paints and adhesives on all surfaces such as plastic, metal and glass and about the degree of cleanliness in mN/m (dyne/cm). The arcotest ® ORGANIC test inks are test liquids with a defined surface tension that are coloured. They have been specially developed to offer non-toxic and non-labelling inks. The application and handling of arcotest ® ORGANIC is based on DIN 53364 and ISO 8296. Result: If the edges of the cotton swab or pencil application contract within 2 seconds, repeat the measurement with the next lowest value. If the edges run outwards, repeat the measurement with the next highest value. The surface tension is reached when the line remains in place for just 2 seconds. Shelf life 1 year unopened, 6 months after opening. Individual components of the test inks evaporate to varying degrees. Close bottles and pens tightly after use. Test Inks arcotest ® arcoweb ® , green The arcoweb ® wipes are intended for single use. They are sealed in paper-aluminium composite packaging. This prevents the ink from flowing due to large quantities. Appropriate handling ensures that no ink is spilled and that hands are not stained by the green ink. The test ink contained is non-hazardous, non-toxic and non-hazardous to health in accordance with the Hazardous Substances Regulation (EC) No. 1272/2008. Observation time: 2 s Accuracy: ±1 mN/m Properties: Ideal for large areas Easy handling Not toxic, harmful to health or the environment Constantly low application quantity No spillage Result visible within 2 seconds Application width 25 mm
Product Detail
The QUICKTEST 38 ® and the RAPIDTEST 38 ® can be used to determine to what extent the pretreatment of polyolefins (polypropylene, polyethylene, polybutylene) has shown an effect.The liquid contained in the pen remains as a continuous line at a surface tension value of 38 mN/m or greater, below that it rolls off. The line applied with QUICKTEST 38 ® or RAPIDTEST 38 ® dries in a matter of seconds and no longer needs to be wiped off. Advantages: Extremely easy to handle Perfect for quick checks No wiping off necessary Lasting display of result Archiving of test result possible ATTENTION: The test liquid of QUICKTEST 38 ® and RAPIDTEST 38 ® contains solvents. Solvent-sensitive materials (e.g. PS) can be attacked by this, which can lead to misinterpretation! RAPIDTEST 38 ® arcotest ® , green Not toxic to aquatic organisms Does not cause eye damage Not harmful to health
Product Detail
The QUICKTEST 38 ® and the RAPIDTEST 38 ® can be used to determine to what extent the pretreatment of polyolefins (polypropylene, polyethylene, polybutylene) has shown an effect.The liquid contained in the pen remains as a continuous line at a surface tension value of 38 mN/m or greater, below that it rolls off. The line applied with QUICKTEST 38 ® or RAPIDTEST 38 ® dries in a matter of seconds and no longer needs to be wiped off. Advantages: Extremely easy to handle Perfect for quick checks No wiping off necessary Lasting display of result Archiving of test result possible ATTENTION: The test liquid of QUICKTEST 38 ® and RAPIDTEST 38 ® contains solvents. Solvent-sensitive materials (e.g. PS) can be attacked by this, which can lead to misinterpretation! QUICKTEST 38 ® arcotest ® , red Good readability due to striking red colouring
Product Detail
Test inks can provide information about the adhesive strength of printing inks, paints and adhesives on all surfaces such as plastic, metal and glass and about the degree of cleanliness in mN/m (dyne/cm). The arcotest ® ORGANIC test inks are test liquids with a defined surface tension that are coloured. They have been specially developed to offer non-toxic and non-labelling inks. The application and handling of arcotest ® ORGANIC is based on DIN 53364 and ISO 8296. Result: If the edges of the cotton swab or pencil application contract within 2 seconds, repeat the measurement with the next lowest value. If the edges run outwards, repeat the measurement with the next highest value. The surface tension is reached when the line remains in place for just 2 seconds. Shelf life 1 year unopened, 6 months after opening. Individual components of the test inks evaporate to varying degrees. Close bottles and pens tightly after use. Test Inks arcotest ® arcoweb ® , green The arcoweb ® wipes are intended for single use. They are sealed in paper-aluminium composite packaging. This prevents the ink from flowing due to large quantities. Appropriate handling ensures that no ink is spilled and that hands are not stained by the green ink. The test ink contained is non-hazardous, non-toxic and non-hazardous to health in accordance with the Hazardous Substances Regulation (EC) No. 1272/2008. Observation time: 2 s Accuracy: ±1 mN/m Properties: Ideal for large areas Easy handling Not toxic, harmful to health or the environment Constantly low application quantity No spillage Result visible within 2 seconds Application width 25 mm
Product Detail
Cleaning agent arcotestCLEANER for test inks arcotestCLEANER is a solvent based on ethyl alcohol. It is used to improve the cleanliness of various surfaces such as metals, glass and plastic surfaces. With arcotestCLEANER, tested parts can be reused by wiping off the test ink. As surfaces are always different, a suitability test should be carried out before each application. Better cleanliness through surface cleaning Solvent system based on ethyl alcohol No unpleasant odour Dries very quickly Can clean and possibly increase the adhesive strength in one step Easy cleaning of the applied test inks Available in 250 ml aluminium bottles
Product Detail
arcospray 38 ® , colourless The arcospray 38 ® test ink is a test liquid with 38 mN/m surface tension. It was developed to quickly determine whether the surface is grease-free,It was developed to quickly determine whether the surface is grease-free, as it can be assumed that it is grease-free from this value. arcospray 38 ® can be cleaned off without leaving any residue after application using heat radiation - infrared. Tested parts can continue to be used. Not only large surfaces, but also very small surfaces, such as chain links, can be assessed quickly and easily using arcospray 38 ® . The determination of the surface tension is carried out by spraying the test ink onto the surfaces to be assessed. Application: - Hold the spray bottle at a distance of approx. at a distance of approx. 15 cm - Spray 2 to 4 times Result: If the test ink contracts, the surface tension of the test surface is lower than 38 mN/m. If the ink spray application remains remains unchanged, the surface tension value surface tension has reached 38 mN/mor slightly higher. Observation time: 2 s Accuracy: ±1 mN/m Properties: Ideal for very small and large areas Easy to handle Not toxic, harmful to health or the environment Residue-free testing of surfaces Simple spraying of the arcospray ink Results visible within 2 seconds Non-contact surface testing
Product Detail© 2023 Copyright. All Rights Reserved. Unit 19, Euroway House, Roydsdale Way, Bradford, BD4 6SE, UK
© 2023 Copyright. All Rights Reserved. Unit 19, Euroway House, Roydsdale Way, Bradford, BD4 6SE, UK
