Deliver to
United Kingdom
Material: PTFE. In thin-layer chromatography, the separation of the components of a mixture is the most delicate step, as it is subject to different and variable parameters. Some are perfectly controlled (chemical nature of the stationary and mobile phase), others are more random (degree of humidity, ambient temperature, pre-saturation). All require precise and rigorous protocols to achieve correct, repeatable and reproducible separations. The quality of the migration separation chamber and the choice of its size and shape are very important. Further attractive products to complete your chromatography laboratory can be found on our Chromatography page! Horizontal Developing Chamber for TLC biostep ® (DESAGA) For analysing small-format plates. The H separating chamber optimally utilises the advantages of the high-performance TLC coating: small grain size 5 µm better packing more theoretical plates faster migration of the HPTLC optimum separations even with the shortest runs Anywhere, especially where time is limited and clear results must be achieved, is the ideal place to use the H separation chamber: in the laboratory and in the pharmacy. The chambers are made of solvent-resistant PTFE, precisely milled and sealed with a 4 mm thick glass cover disc. Easy-to-clean glass frit rods guide the superplasticiser to the layer. Delivery incl. frit rods and cover plate.
Product Detail
Enables the preparation of “special” TLC plates. The device can be set to produce layer thicknesses from 100 to 2000 μm. The plate preparator consists of a spreading table and spreading container, the simultaneous use of which guarantees optimum results! Capacity: 5 plates 200 × 200 mm, 10 plates 100 × 100 mm or 100 × 200 mm and 20 plates 100 × 100 mm. Application Simply dilute the sorbent with a suitable solvent, homogenise well to dissolve any lumps and pour into the spreading device. Set the desired thickness of the plates (100-2000 µm). Move the lever and pull the device straight and continuously over the clean carrier plates. TLC Plate Preparer biostep ® (DESAGA)
Product Detail
Tube for biostep ® (DESAGA) Sprayer Box Special chemical-resistant exhaust air hose with a length of 2 metres. Delivery incl. spiral clamp.
Product Detail
Material: PVC. Sprayer Box biostep ® (DESAGA) with fan Improve the safety and productivity of your laboratory! The spray chamber as a protective device when spraying TLC plates with aggressive solutions is made of acid-resistant PVC and can accommodate TLC plates up to 20 x 20 cm. A built-in low-noise fan directs the spray mist via the pipe connection at the rear into a fume cupboard to ensure that no hazardous vapours remain in your working environment. The fan’s pipe connection leads upwards and can be easily connected to a standard NW 110 installation pipe to ensure efficient ventilation. With an air supply of 400 m 3 /h, the spray chamber is converted into a small fume cupboard on your workbench. Any reagent that runs off is collected in a separate tray. Delivery without tube.
Product Detail
Material: borosilicate glass 3.3. Autoclavable: yes. Cylindrical glass beaker with ground rim. Battery jars ROTILABO ®
Product Detail
Further attractive products to complete your chromatography laboratory can be found on our Chromatography page! The template results in 39 spotting positions. Spotting Guide for TLC plates biostep ® (DESAGA) To deposit samples at regular dot or line intervals and read the Rf. The numbered triangular cut-outs at 5 mm intervals provide exact guidance for the pipette. The non-slip underside prevents unintentional displacement on the table.
Product Detail
Material: aluminium, surface anodised on all sides, imprint by sub-anodising resistant to solvents.. Further attractive products to complete your chromatography laboratory can be found on our Chromatography page! Ruler ROTICHROM ® for TLC plates For sample application and evaluation of thin layer chromatography. A special printing process (sub-anodised printing), which is only used for anodised aluminium, means that the print is smudge- and scratch-proof and resistant to oil and solvents. Even finger sweat cannot harm the print for years.
Product Detail
TLC Plate Heater biostep ® (DESAGA) Thermoplate S plus The Thermoplate S plus is an electronically controlled hotplate for detection reactions in TLC/HPTLC and for precise heating and drying operations in the laboratory. Advantages: Changing colours from green to red at increasing temperatures Timer function with acustic signal Program control with saving up to 9 programs The unit operates with a platinum resistance thermometer. Temperature readout is made on a coloured touchscreen which changes from green or blue to red at increasing temperatures. This means the user can visually see if it is safe to touch the plate or not. An accustic signal informs the user as soon as a defined time or requested temperature is reached. The heating surface is made of high conductivity aluminium that - together with the ultralarge area of the heating element - ensures a uniform temperature distribution Technical specifications: Temperature range: 25-200 °C Heating area: 240 x 240 mm Heating rate (at 50 °C): 10 K/min Fluctuation range of temperature: 2 K
Product Detail
© 2023 Copyright. All Rights Reserved. Unit 19, Euroway House, Roydsdale Way, Bradford, BD4 6SE, UK
© 2023 Copyright. All Rights Reserved. Unit 19, Euroway House, Roydsdale Way, Bradford, BD4 6SE, UK
