Deliver to
United Kingdom
<p>Prepared to meet the demands of technical research tasks, the Hptlc Plates Alugram ® Xtra Nano-Sil G with Nano Silica Gel offers an advanced solution for thin-layer chromatography (TLC). These octadecyl-modified HPTLC Silica Layers feature a specific surface area of approximately 500 m²/g, ensuring higher separation efficiency compared to standard plates. The medium pore width of 60 Å and particle size range of 2-10 µm contribute to shorter separation times and distances, while allowing for smaller sample amounts as low as 0.01-0.1 µl (10-100 nanolitres). This results in lower diffusion and increased detection sensitivity, making it ideal for various applications such as Aflatoxins, Alkaloids, Amines, Amino acids, Analgetics, Antibiotics</p> <ul> <li><strong>Category:</strong> Octadecyl-modified HPTLC Silica Layers</li> <li><strong>Particle size:</strong> 2-10 µm</li> <li><strong>Fluorescent indicator:</strong> no</li> <li><strong>Pore size:</strong> 60 Å</li> <li><strong>Recommended application(s):</strong> Aflatoxins, Alkaloids, Amines, Amino acids, Analgetics, Antibiotics, Hormones, Marihuana compounds, Normal phase (NP), Patulin, Steroids, Sweeteners, Vitamins</li> <li><strong>Temperature stability:</strong> High</li> <li><strong>Specific surface according to BET:</strong> 500 m²/g</li> <li><strong>Modification:</strong> Unmodified silica gel (SiOH)</li> <li><strong>Pore volume:</strong> 0.75 ml/g</li> <li><strong>Plate format:</strong> 5 x 20 cm</li> <li><strong>Separation principle:</strong> Normal phase (NP)</li> <li><strong>Particle type:</strong> Fully porous particles (FPP)</li> <li><strong>pH stability:</strong> 2,0-8,0</li> <li><strong>Phase:</strong> Xtra Nano-SIL G</li> <li><strong>Layer thickness:</strong> 0.2 mm</li> <li><strong>Material:</strong> aluminium</li> </ul>
Product Detail
<p>Widely applied in chemical workflows, octadecyl-modified HPTLC Silica Layers such as the Hptlc Plates Nano-Sil-20 with Nano Silica Gel offer enhanced separation efficiency compared to traditional plates. These plates feature a specific surface area of approximately 500 m²/g, a medium pore width of 60 Å, and a pore volume of 0.75 ml/g. The particle size ranges from 2-10 µm, making them suitable for various applications including Aflatoxins, Alkaloids, Amines, and more. Their high temperature stability ensures reliable results even under demanding conditions. Complete your chromatography laboratory with these advanced HPTLC plates and explore further attractive products on our Chromatography page.</p> <ul> <li><strong>Category:</strong> Octadecyl-modified HPTLC Silica Layers</li> <li><strong>Layer thickness:</strong> 0.2 mm</li> <li><strong>Particle size:</strong> 2-10 µm</li> <li><strong>Recommended application(s):</strong> Aflatoxins, Alkaloids, Amines, Amino acids, Analgetics, Antibiotics, Hormones, Marihuana compounds, Normal phase (NP), Patulin, Steroids, Sweeteners, Vitamins</li> <li><strong>Particle type:</strong> Fully porous particles (FPP)</li> <li><strong>Pore size:</strong> 60 Å</li> <li><strong>Material:</strong> glass</li> <li><strong>Temperature stability:</strong> High</li> <li><strong>Specific surface according to BET:</strong> 500 m²/g</li> <li><strong>Pore volume:</strong> 0.75 ml/g</li> <li><strong>pH stability:</strong> 2,0-8,0</li> <li><strong>Plate format:</strong> 5 x 5 cm</li> <li><strong>Fluorescent indicator:</strong> no</li> <li><strong>Modification:</strong> Unmodified silica gel (SiOH)</li> <li><strong>Separation principle:</strong> Normal phase (NP)</li> <li><strong>Phase:</strong> Nano-SIL-20</li> </ul>
Product Detail
<p>Engineered to maintain reliability in process-driven workflows, these Octadecyl-modified HPTLC Silica Layers, specifically the HPTLC Plates Nano-SIL-20 / UV 254 with Nano Silica Gel, offer enhanced separation capabilities for a variety of applications. Featuring a specific surface area of approximately 500 m²/g and a medium pore width of 60 Å, they provide higher separation efficiency, shorter separation times, and reduced sample quantities compared to standard plates. Their smaller particle size of 2-10 µm ensures lower diffusion and increased detection sensitivity. These plates are compatible with a wide pH range of 2.0-8.0 and exhibit high temperature stability. Recommended for use in analyzing Aflatoxins, Alkaloids, Amines, Amino acids, Analgetics, Antibiotics,</p> <ul> <li><strong>Category:</strong> Octadecyl-modified HPTLC Silica Layers</li> <li><strong>Specific surface according to BET:</strong> 500 m²/g</li> <li><strong>pH stability:</strong> 2,0-8,0</li> <li><strong>Temperature stability:</strong> High</li> <li><strong>Separation principle:</strong> Normal phase (NP)</li> <li><strong>Material:</strong> glass</li> <li><strong>Modification:</strong> Unmodified silica gel (SiOH)</li> <li><strong>Layer thickness:</strong> 0.2 mm</li> <li><strong>Recommended application(s):</strong> Aflatoxins, Alkaloids, Amines, Amino acids, Analgetics, Antibiotics, Hormones, Marihuana compounds, Normal phase (NP), Patulin, Steroids, Sweeteners, Vitamins</li> <li><strong>Plate format:</strong> 10 x 10 cm</li> <li><strong>Fluorescent indicator:</strong> yes</li> <li><strong>Particle size:</strong> 2-10 µm</li> <li><strong>Particle type:</strong> Fully porous particles (FPP)</li> <li><strong>Pore volume:</strong> 0.75 ml/g</li> <li><strong>Pore size:</strong> 60 Å</li> <li><strong>Phase:</strong> Nano-SIL-20</li> </ul>
Product Detail
<p>Widely applied in chemical workflows, octadecyl-modified HPTLC Silica Layers like the Alugram® Xtra Nano-SILGUR plate offer enhanced performance for various applications. This specific product features an aluminum material with a medium pore width of 60 Å, a pore volume of 0.75 ml/g, and particles ranging from 5-17 μm. Its unique nano silica gel layer provides higher separation efficiency, shorter separation times, and reduced sample quantities, making it ideal for detecting trace amounts of substances such as aflatoxins, antibiotics, steroids, and vitamins. Additionally, its high temperature stability and fluorescent indicator ensure reliable results under diverse conditions. Complete your chromatography lab with this versatile HPTLC plate and explore other attractive products available on our Chromatography page.</p> <ul> <li><strong>Category:</strong> Octadecyl-modified HPTLC Silica Layers</li> <li><strong>pH stability:</strong> 2,0-8,0</li> <li><strong>Plate format:</strong> 10 x 10 cm</li> <li><strong>Pore volume:</strong> 0.75 ml/g</li> <li><strong>Material:</strong> aluminium</li> <li><strong>Particle size:</strong> 5-17 µm</li> <li><strong>Layer thickness:</strong> 0.2 mm</li> <li><strong>Fluorescent indicator:</strong> yes</li> <li><strong>Pore size:</strong> 60 Å</li> <li><strong>Temperature stability:</strong> High</li> <li><strong>Specific surface according to BET:</strong> 500 m²/g</li> <li><strong>Separation principle:</strong> Normal phase (NP)</li> <li><strong>Recommended application(s):</strong> Aflatoxins, Alkaloids, Amines, Amino acids, Analgetics, Antibiotics, Hormones, Marihuana compounds, Normal phase (NP), Patulin, Steroids, Sweeteners, Vitamins</li> <li><strong>Modification:</strong> Unmodified silica gel (SiOH), Concentrating zone (kieselguhr, diatomaceous earth or diatomite)</li> <li><strong>Particle type:</strong> Fully porous particles (FPP)</li> <li><strong>Phase:</strong> Xtra Nano-SILGUR</li> </ul>
Product Detail
<p>Widely applied in chemical workflows, the Hptlc Plates Alugram ® Nano-Sil G with Nano Silica Gel offer enhanced separation capabilities for various applications such as aflatoxins, alkaloids, amines, antibiotics, hormones, marihuana compounds, normal phase (NP), patulin, steroids, sweeteners, vitamins, and more. These plates feature a specific surface area of approximately 500 m²/g, medium pore width of 60 Å, and a specific pore volume of 0.75 ml/g. Made of aluminum with nano silica gel 60, they provide higher separation effects, shorter separation times and distances, and require smaller sample amounts of 0.01-0.1 μl (10-100 nanolitres). Their lower diffusion due to extremely small amounts also</p> <ul> <li><strong>Category:</strong> Octadecyl-modified HPTLC Silica Layers</li> <li><strong>Specific surface according to BET:</strong> 500 m²/g</li> <li><strong>Fluorescent indicator:</strong> no</li> <li><strong>Modification:</strong> Unmodified silica gel (SiOH)</li> <li><strong>Material:</strong> aluminium</li> <li><strong>Pore volume:</strong> 0.75 ml/g</li> <li><strong>Layer thickness:</strong> 0.2 mm</li> <li><strong>Separation principle:</strong> Normal phase (NP)</li> <li><strong>Temperature stability:</strong> High</li> <li><strong>Particle type:</strong> Fully porous particles (FPP)</li> <li><strong>Phase:</strong> Nano-SIL G</li> <li><strong>pH stability:</strong> 2,0-8,0</li> <li><strong>Plate format:</strong> 20 x 20 cm</li> <li><strong>Particle size:</strong> 2-10 µm</li> <li><strong>Pore size:</strong> 60 Å</li> <li><strong>Recommended application(s):</strong> Aflatoxins, Alkaloids, Amines, Amino acids, Analgetics, Antibiotics, Hormones, Marihuana compounds, Normal phase (NP), Patulin, Steroids, Sweeteners, Vitamins</li> </ul>
Product Detail
<p>Widely applied in chemical workflows, these HPTLC Plates Nano-SIL-20/UV 254 with Nano Silica Gel come packaged as 100 units in a 5x5cm glass plate format. Featuring a specific surface area of approximately 500 m²/g, they offer higher separation efficiency compared to standard plates, while also reducing separation times and distances. Their smaller particle size of 2-10 µm allows for lower sample amounts of 0.01-0.1 µl, resulting in less diffusion and increased detection sensitivity. These plates are suitable for a wide range of applications including Aflatoxins, Alkaloids, Amines, Amino acids, Analgetics, Antibiotics, Hormones, Marihuana compounds, Normal phase (NP), Patulin, Steroids, Sweeteners,</p> <ul> <li><strong>Category:</strong> Octadecyl-modified HPTLC Silica Layers</li> <li><strong>Layer thickness:</strong> 0.2 mm</li> <li><strong>Pore size:</strong> 60 Å</li> <li><strong>Particle size:</strong> 2-10 µm</li> <li><strong>Temperature stability:</strong> High</li> <li><strong>Particle type:</strong> Fully porous particles (FPP)</li> <li><strong>Fluorescent indicator:</strong> yes</li> <li><strong>Material:</strong> glass</li> <li><strong>Specific surface according to BET:</strong> 500 m²/g</li> <li><strong>Plate format:</strong> 5 x 5 cm</li> <li><strong>pH stability:</strong> 2,0-8,0</li> <li><strong>Recommended application(s):</strong> Aflatoxins, Alkaloids, Amines, Amino acids, Analgetics, Antibiotics, Hormones, Marihuana compounds, Normal phase (NP), Patulin, Steroids, Sweeteners, Vitamins</li> <li><strong>Modification:</strong> Unmodified silica gel (SiOH)</li> <li><strong>Pore volume:</strong> 0.75 ml/g</li> <li><strong>Phase:</strong> Nano-SIL-20</li> <li><strong>Separation principle:</strong> Normal phase (NP)</li> </ul>
Product Detail
<p>Engineered for consistent performance, these HPTLC Plates Alugram ® Xtra Nano-Sil G / UV 254 with Nano Silica Gel offer enhanced separation capabilities through their high specific surface area of approximately 500 m²/g. Measuring 5 x 20 cm in dimension, they feature a medium pore width of 60 Å and a specific pore volume of 0.75 ml/g, making them ideal for a wide range of applications including Aflatoxins, Alkaloids, Amines, and more. Their particle size ranges from 2-10 µm, ensuring reduced diffusion and increased detection sensitivity.</p> <ul> <li><strong>Category:</strong> Octadecyl-modified HPTLC Silica Layers</li> <li><strong>Specific surface according to BET:</strong> 500 m²/g</li> <li><strong>Temperature stability:</strong> High</li> <li><strong>pH stability:</strong> 2,0-8,0</li> <li><strong>Separation principle:</strong> Normal phase (NP)</li> <li><strong>Recommended application(s):</strong> Aflatoxins, Alkaloids, Amines, Amino acids, Analgetics, Antibiotics, Hormones, Marihuana compounds, Normal phase (NP), Patulin, Steroids, Sweeteners, Vitamins</li> <li><strong>Plate format:</strong> 5 x 20 cm</li> <li><strong>Pore size:</strong> 60 Å</li> <li><strong>Phase:</strong> Xtra Nano-SIL G</li> <li><strong>Particle size:</strong> 2-10 µm</li> <li><strong>Material:</strong> aluminium</li> <li><strong>Modification:</strong> Unmodified silica gel (SiOH)</li> <li><strong>Pore volume:</strong> 0.75 ml/g</li> <li><strong>Particle type:</strong> Fully porous particles (FPP)</li> <li><strong>Layer thickness:</strong> 0.2 mm</li> <li><strong>Fluorescent indicator:</strong> yes</li> </ul>
Product Detail
<p>Adapted for use across diverse chemical handling environments, these HPTLC Plates Alugram ® Nano-Sil G with Nano Silica Gel offer enhanced separation capabilities in various applications. Manufactured from aluminum, they feature a specific surface area of approximately 500 m²/g, a medium pore width of 60 Å, and a specific pore volume of 0.75 ml/g. The particle size ranges from 2-10 µm, making them suitable for a wide range of analytes. These plates exhibit high temperature stability and pH compatibility within the range of 2.0-8.0. Recommended for use in the analysis of a variety of substances including aflatoxins, antibiotics, steroids, and vitamins, among others.</p> <ul> <li><strong>Category:</strong> Octadecyl-modified HPTLC Silica Layers</li> <li><strong>Specific surface according to BET:</strong> 500 m²/g</li> <li><strong>Material:</strong> aluminium</li> <li><strong>Layer thickness:</strong> 0.2 mm</li> <li><strong>Separation principle:</strong> Normal phase (NP)</li> <li><strong>Fluorescent indicator:</strong> no</li> <li><strong>Plate format:</strong> 5 x 20 cm</li> <li><strong>pH stability:</strong> 2,0-8,0</li> <li><strong>Phase:</strong> Nano-SIL G</li> <li><strong>Pore size:</strong> 60 Å</li> <li><strong>Particle type:</strong> Fully porous particles (FPP)</li> <li><strong>Recommended application(s):</strong> Aflatoxins, Alkaloids, Amines, Amino acids, Analgetics, Antibiotics, Hormones, Marihuana compounds, Normal phase (NP), Patulin, Steroids, Sweeteners, Vitamins</li> <li><strong>Temperature stability:</strong> High</li> <li><strong>Particle size:</strong> 2-10 µm</li> <li><strong>Modification:</strong> Unmodified silica gel (SiOH)</li> <li><strong>Pore volume:</strong> 0.75 ml/g</li> </ul>
Product Detail
<p>A reliable solution for controlled synthesis, the Hptlc Plates Alugram ® Xtra Nano-Sil G / UV 254 with Nano Silica Gel offers an enhanced separation effect in thin-layer chromatography (TLC). These octadecyl-modified HPTLC Silica Layers feature a specific surface area of approximately 500 m²/g, ensuring higher efficiency compared to standard plates. The medium pore width of 60 Å allows for shorter separation times and distances while requiring smaller sample amounts of 0.01-0.1 μl (10-100 nanolitres). This results in lower diffusion and increased detection sensitivity, making it ideal for applications such as aflatoxins, alkaloids, antibiotics, steroids, and vitamins. Complete your chromatography laboratory with this high-quality HPTLC plate.</p> <ul> <li><strong>Category:</strong> Octadecyl-modified HPTLC Silica Layers</li> <li><strong>Material:</strong> aluminium</li> <li><strong>Layer thickness:</strong> 0.2 mm</li> <li><strong>pH stability:</strong> 2,0-8,0</li> <li><strong>Fluorescent indicator:</strong> yes</li> <li><strong>Particle type:</strong> Fully porous particles (FPP)</li> <li><strong>Modification:</strong> Unmodified silica gel (SiOH)</li> <li><strong>Temperature stability:</strong> High</li> <li><strong>Recommended application(s):</strong> Aflatoxins, Alkaloids, Amines, Amino acids, Analgetics, Antibiotics, Hormones, Marihuana compounds, Normal phase (NP), Patulin, Steroids, Sweeteners, Vitamins</li> <li><strong>Specific surface according to BET:</strong> 500 m²/g</li> <li><strong>Phase:</strong> Xtra Nano-SIL G</li> <li><strong>Separation principle:</strong> Normal phase (NP)</li> <li><strong>Particle size:</strong> 2-10 µm</li> <li><strong>Pore volume:</strong> 0.75 ml/g</li> <li><strong>Pore size:</strong> 60 Å</li> <li><strong>Plate format:</strong> 20 x 20 cm</li> </ul>
Product Detail
<p>Configured for stable performance in synthesis settings, these Octadecyl-modified HPTLC Silica Layers feature an aluminum base with a specific surface area of approximately 500 m²/g, making them ideal for a wide range of applications including Aflatoxins, Alkaloids, Amines, Amino acids, Analgetics, Antibiotics, Hormones, Marihuana compounds, Normal phase (NP), Patulin, Steroids, Sweeteners, Vitamins, and more. The medium pore width is 60 Å, while the specific pore volume is 0.75 ml/g. These plates also include fully porous particles (FPP) with a particle size of 2-10 µm, ensuring high separation efficiency and shorter separation times.</p> <ul> <li><strong>Category:</strong> Octadecyl-modified HPTLC Silica Layers</li> <li><strong>Phase:</strong> Nano-SIL G</li> <li><strong>Separation principle:</strong> Normal phase (NP)</li> <li><strong>Pore size:</strong> 60 Å</li> <li><strong>Specific surface according to BET:</strong> 500 m²/g</li> <li><strong>Layer thickness:</strong> 0.2 mm</li> <li><strong>Pore volume:</strong> 0.75 ml/g</li> <li><strong>Plate format:</strong> 5 x 20 cm</li> <li><strong>Material:</strong> aluminium</li> <li><strong>Fluorescent indicator:</strong> yes</li> <li><strong>pH stability:</strong> 2,0-8,0</li> <li><strong>Recommended application(s):</strong> Aflatoxins, Alkaloids, Amines, Amino acids, Analgetics, Antibiotics, Hormones, Marihuana compounds, Normal phase (NP), Patulin, Steroids, Sweeteners, Vitamins</li> <li><strong>Particle size:</strong> 2-10 µm</li> <li><strong>Modification:</strong> Unmodified silica gel (SiOH)</li> <li><strong>Temperature stability:</strong> High</li> <li><strong>Particle type:</strong> Fully porous particles (FPP)</li> </ul>
Product Detail
<p>Widely applied in chemical workflows, the Hptlc Plates Nano-Sil-20 with Nano Silica Gel offer enhanced separation capabilities for various substances such as aflatoxins, alkaloids, amines, antibiotics, hormones, marihuana compounds, normal phase (NP), patulin, steroids, sweeteners, vitamins, and many others. These plates feature a specific surface area of approximately 500 square meters per gram, ensuring high efficiency and shorter separation times compared to traditional plates. Made of glass with fully porous particles (FPP) and a layer thickness of 0.2 millimeters, these plates provide excellent temperature stability and pH stability within the range of 2.0 to 8.0. With their smaller particle size of 2-10 microns, they allow for lower diffusion and higher detection sensitivity, making them an ideal choice for labor</p> <ul> <li><strong>Category:</strong> Octadecyl-modified HPTLC Silica Layers</li> <li><strong>Pore size:</strong> 60 Å</li> <li><strong>Fluorescent indicator:</strong> no</li> <li><strong>Layer thickness:</strong> 0.2 mm</li> <li><strong>Temperature stability:</strong> High</li> <li><strong>Recommended application(s):</strong> Aflatoxins, Alkaloids, Amines, Amino acids, Analgetics, Antibiotics, Hormones, Marihuana compounds, Normal phase (NP), Patulin, Steroids, Sweeteners, Vitamins</li> <li><strong>Separation principle:</strong> Normal phase (NP)</li> <li><strong>Plate format:</strong> 10 x 10 cm</li> <li><strong>Particle type:</strong> Fully porous particles (FPP)</li> <li><strong>Phase:</strong> Nano-SIL-20</li> <li><strong>Modification:</strong> Unmodified silica gel (SiOH)</li> <li><strong>Pore volume:</strong> 0.75 ml/g</li> <li><strong>Particle size:</strong> 2-10 µm</li> <li><strong>pH stability:</strong> 2,0-8,0</li> <li><strong>Specific surface according to BET:</strong> 500 m²/g</li> <li><strong>Material:</strong> glass</li> </ul>
Product Detail
<p>Suitable for laboratory and industrial environments, this set of 25 Hptlc Plates Alugram ® Nano-Sil G / Uv 254 features an aluminum material with nano silica gel 60, offering a specific surface area of approximately 500 m²/g. These plates boast medium pore width of 60 Å and a specific pore volume of 0.75 ml/g, with particle sizes ranging from 2-10 µm. They are unmodified silica gel (SiOH) plates in a 20 x 20 cm format, suitable for various applications such as Aflatoxins, Alkaloids, Amines, Amino acids, Analgetics, Antibiotics, Hormones, Marihuana compounds, Normal phase (NP), Patulin, Steroids, Sweeteners, Vitam</p> <ul> <li><strong>Category:</strong> Octadecyl-modified HPTLC Silica Layers</li> <li><strong>Recommended application(s):</strong> Aflatoxins, Alkaloids, Amines, Amino acids, Analgetics, Antibiotics, Hormones, Marihuana compounds, Normal phase (NP), Patulin, Steroids, Sweeteners, Vitamins</li> <li><strong>Layer thickness:</strong> 0.2 mm</li> <li><strong>Phase:</strong> Nano-SIL G</li> <li><strong>Separation principle:</strong> Normal phase (NP)</li> <li><strong>Particle size:</strong> 2-10 µm</li> <li><strong>pH stability:</strong> 2,0-8,0</li> <li><strong>Specific surface according to BET:</strong> 500 m²/g</li> <li><strong>Pore size:</strong> 60 Å</li> <li><strong>Plate format:</strong> 20 x 20 cm</li> <li><strong>Modification:</strong> Unmodified silica gel (SiOH)</li> <li><strong>Temperature stability:</strong> High</li> <li><strong>Pore volume:</strong> 0.75 ml/g</li> <li><strong>Material:</strong> aluminium</li> <li><strong>Particle type:</strong> Fully porous particles (FPP)</li> <li><strong>Fluorescent indicator:</strong> yes</li> </ul>
Product Detail© 2023 Copyright. All Rights Reserved. Unit 19, Euroway House, Roydsdale Way, Bradford, BD4 6SE, UK
© 2023 Copyright. All Rights Reserved. Unit 19, Euroway House, Roydsdale Way, Bradford, BD4 6SE, UK
