Deliver to
United Kingdom
For an operating temperature range from 5 °C above room temperature to 100 °C. Special baths for gentle exhaust steam applications from columns, Erlenmeyer flasks or beakers. For unsupervised continuous operation based on water lever controllers and a low-water safety device. Bath unit, cover frame with openings and split sieve plate over the tubular heating element, made of stainless steel. Bath clearance 150 mm. Serial water baths Hydro H-V series Delivery incl. removable flat/perforated lids with multi-part set of rings and stand rods (L 600 x Ø 12 mm).
Product Detail
Stainless steel inner tank LCD display for displaying setpoint/actual temperature values Integrated digital clock (1 min to 99 h, 59 min or continuous operation) Overheating protection Heater exposed on floor Internal water drainage tube with integrated quick-release coupling Water bath WB series standard model Operating temperature range from 5 °C above room temperature to 99 °C (temperature adjustment range from 10 to 99 °C). Delivery incl. removable bottom and stainless steel cover.
Product Detail
For temperature control of ointments, emulsions, samples, plates and nutrient solutions in the laboratory, as well as warm storage and calibration in industrial applications. For an operating temperature range from 5 °C above ambient temperature to +100 °C Intuitive 3.5″ colour graphic display with touchscreen Integrated digital clock from 1 min to 99.59 h Independent temperature limiter for heater switch-off in the event of a fault Corrosion-protected heating outside of the working area Stainless steel tray with no corners or edges for ease of cleaning, incl. central drain (no obstructing fittings) Bath drainage by drain valve Water bath WTB series incl. flat cover with sets of rings and slanting cover. Delivery incl. inclined and flat cover with sets of rings and drain valve.
Product Detail
For an operating temperature range from 25 to 100 °C. TFT display showing all process data Adjustment and display of temperature values at increments of 0.1 °C With timer function, max. 999 h, 59 min Adjustable trigger points for overheating and insufficient temperature alarm up to max. ±10 K Visual and audible alarm in the event of lack of water, overheating, insufficient temperature and gauge break or short circuit Three application-specific timer functions Bath unit, cover frame, sieve plate, lid and heater made of stainless steel With a drain valve Water bath Hydro-series Standard version Delivery incl. stainless steel lid.
Product Detail
With pump device for continuous circulation of the temperature control medium. For an operating temperature range from 5 °C above ambient temperature to +100 °C Pump can be switched on and off Intuitive 3.5″ colour graphic display with touchscreen Integrated digital clock from 1 min to 99.59 h Independent temperature limiter for heater switch-off in the event of a fault Corrosion-protected heating outside of the working area Stainless steel tray with no corners or edges for ease of cleaning, incl. central drain (no obstructing fittings) Bath drainage by drain valve Water bath with circulation pump WTB series Delivery incl. stainless steel slanting cover and pump device.
Product Detail
For a temperature range up to 99.9 °C. Digital temperature display Internal timer function (max. 99 h, 59 min in 1 min increments), with signal after expiry of the time, optionally with or without heating switch-off Integrated drain screw (except PURA™ 4) Easy to clean as there are no fittings in the bath Integrated run-dry protection and recessed grips Foldable bath cover available as accessory, please order separately Water bath PURA™ series
Product Detail
Stainless steel inner tank LCD display for displaying setpoint/actual temperature values Integrated digital clock (1 min to 99 h, 59 min or continuous operation) Overheating protection Heater exposed on floor Internal water drainage tube with integrated quick-release coupling Water bath WB series standard model Operating temperature range from 5 °C above room temperature to 99 °C (temperature adjustment range from 10 to 99 °C). Delivery incl. removable bottom and stainless steel cover.
Product Detail
For a temperature range up to 99.9 °C. Digital temperature display Internal timer function (max. 99 h, 59 min in 1 min increments), with signal after expiry of the time, optionally with or without heating switch-off Integrated drain screw (except PURA™ 4) Easy to clean as there are no fittings in the bath Integrated run-dry protection and recessed grips Foldable bath cover available as accessory, please order separately Water bath PURA™ series
Product Detail
With pump device for continuous circulation of the temperature control medium. For an operating temperature range from 5 °C above ambient temperature to +100 °C Pump can be switched on and off Intuitive 3.5″ colour graphic display with touchscreen Integrated digital clock from 1 min to 99.59 h Independent temperature limiter for heater switch-off in the event of a fault Corrosion-protected heating outside of the working area Stainless steel tray with no corners or edges for ease of cleaning, incl. central drain (no obstructing fittings) Bath drainage by drain valve Water bath with circulation pump WTB series Delivery incl. stainless steel slanting cover and pump device.
Product Detail© 2023 Copyright. All Rights Reserved. Unit 19, Euroway House, Roydsdale Way, Bradford, BD4 6SE, UK
© 2023 Copyright. All Rights Reserved. Unit 19, Euroway House, Roydsdale Way, Bradford, BD4 6SE, UK
