Deliver to
United Kingdom
<p>Formulated to support synthetic operations, the Flow Sensor for P770 falls under the category of other sensors and general accessories. This device is designed for measuring air and gases, with a measuring range of 0.3 to 20 meters per second. It comes equipped with a handle and a connection cable that measures one meter in length. With its dimensions of 22 millimeters in diameter and 175 millimeters in height, this flow sensor is an ideal addition to any laboratory's inventory.</p> <ul> <li><strong>Category:</strong> Other sensors and general accessories</li> <li><strong>Cable length:</strong> 1 m</li> <li><strong>Ø x L:</strong> 22 x 175 mm</li> <li><strong>Version:</strong> Flow sensor</li> </ul>
Product Detail
<p>Suitable for laboratory and industrial environments, this IDS WLM set is designed for wireless transmission of measured values from an IDS sensor to an IDS device. This versatile accessory kit supports various parameters such as pH, redox, oxygen, conductivity, and turbidity measurements. It includes the wireless modules IDS WLM-S for the IDS sensor and IDS WLM-M for the IDS device, along with a charger for the wireless module IDS WLM-S that comes equipped with a USB power supply unit. This comprehensive set ensures seamless communication between your IDS devices and sensors in diverse applications.</p> <ul> <li><strong>Category:</strong> Other sensors and general accessories</li> <li><strong>Type:</strong> IDS WLM set</li> </ul>
Product Detail
<p>Crafted to support technical production environments, the Redox Metal Single-Rod Measuring Cell Scienceline Plus Me-E Pt 6X Series, specifically the Me-E Pt 62 model, is designed for measuring redox potential. This device features a robust platinum diaphragm that ensures resistance to stirring, making it ideal for titration applications. Its increased KCl outflow rate reduces contamination within the diaphragm/reference chamber, providing more stable measurements in low-electrolyte media. Cleaning of the diaphragm should only be performed using chemical methods. Note that this product does not include a connecting cable; one must be ordered separately. The Me-E Pt 62 model boasts a 12mm shaft diameter, a 120mm shaft length made of glass, and a platinum sensor with a 1mm diameter. It operates between</p> <ul> <li><strong>Category:</strong> Other sensors and general accessories</li> <li><strong>Shaft length:</strong> 120 mm</li> <li><strong>Operating temperature:</strong> -5 to +100 °C</li> <li><strong>Sensor type:</strong> platinum, pin, Ø 1 mm</li> <li><strong>Shaft material:</strong> glass</li> <li><strong>Connection:</strong> S7 connector</li> <li><strong>Electrolyte:</strong> 3 mol/l KCl</li> <li><strong>Temperature sensor:</strong> without</li> <li><strong>Type:</strong> Me-E Pt 62</li> <li><strong>Reference system:</strong> Silamid ®</li> <li><strong>Parameters:</strong> redox</li> <li><strong>Storage solution:</strong> 3 mol/l KCl</li> <li><strong>Ø Shaft:</strong> 12 mm</li> <li><strong>Diaphragm:</strong> platinum</li> </ul>
Product Detail
<p>Developed to align with modern chemical standards, this storage set is designed specifically for the safe and efficient storage of electrodes with a shaft diameter of 12mm. Ideal for laboratories or industrial settings where electrochemical measurements are common, it ensures the readiness of these essential tools for immediate use when required. The set includes a GL 45 screw cap and five seals with holes, although a separate purchase of the screw top bottle and storage solution may be necessary depending on specific needs. By prioritizing both safety and convenience, this storage set for electrodes Set 1 offers an indispensable addition to any laboratory inventory.</p> <ul> <li><strong>Category:</strong> Other sensors and general accessories</li> <li><strong>Version:</strong> Set 1</li> </ul>
Product Detail
<p>Formulated to support synthetic operations, this Electrode Holder with Cable Duct is designed for applications requiring multiple electrodes. Its base plate measures 110 x 130 mm, providing a stable foundation, while its arm can extend up to 32 cm for optimal reach. Equipped with three joints, it offers adaptability in various working conditions. The holder accommodates three electrodes with an opening diameter of 16 mm, and an additional 11 mm opening is available for added versatility. Weighing just 0.6 kg (base plate) and 0.1 kg (arm), it ensures ease of handling during laboratory procedures.</p> <ul> <li><strong>Category:</strong> Other sensors and general accessories</li> <li><strong>Version:</strong> Electrode holder</li> </ul>
Product Detail
<p>Intended for structured formulation workflows, the Type: InLab ® Trace flow cell is an essential accessory for other sensors and general accessories in labware, measuring instruments, and sensors categories. This high-quality flow cell is specifically designed to be used with the InLab ® Trace conductivity sensor, providing accurate measurements up to 10 µS/cm with minimal CO2 interference. With connections for hoses with an inner diameter of 5mm, it allows for efficient flow rates exceeding 100ml/min. This accessory is indispensable for maintaining precision and reliability in your laboratory's measurement processes.</p> <ul> <li><strong>Category:</strong> Other sensors and general accessories</li> <li><strong>Type:</strong> InLab ® Trace flow cell</li> </ul>
Product Detail
<p>Designed with efficiency in synthetic processes in mind, this Accessories Replaceable Membranes Set for Oxy 7 is an essential tool for maintaining optimal performance of your OXY DO7 sensor. This set includes two replaceable membranes, ensuring seamless replacement when needed, thereby minimizing downtime during critical experiments. By using these high-quality membranes, you can trust that your sensor will continue to deliver accurate oxygen readings, enhancing the reliability of your results.</p> <ul> <li><strong>Category:</strong> Other sensors and general accessories</li> <li><strong>Designation:</strong> Set with two replaceable membranes for OXY DO7 sensor</li> </ul>
Product Detail
<p>Recommended for applications requiring controlled solvent behavior, the AS/IDS-3 connecting cable is an essential accessory in the other sensors and general accessories category of measuring instruments. This cable features a sensor plug head connection and a specific 4-pole device connection, making it compatible with various IDS sensors. With a length of 3 meters, this cable offers flexibility while maintaining precise control over solvents during your experiments.</p> <ul> <li><strong>Category:</strong> Other sensors and general accessories</li> <li><strong>Type:</strong> AS/IDS-3</li> <li><strong>Connection:</strong> sensor: plug head device: specific (4-pole)</li> <li><strong>Version:</strong> length 3 m</li> </ul>
Product Detail
<p>Prepared for use in regulated laboratory conditions, the Redox Metal Single-Rod Measuring Cell Scienceline Plus Me-E Pt 6X Series, specifically the Me-E Pt 61 model, is designed for measuring redox potential. This device features a robust platinum diaphragm that ensures resistance to stirring, making it ideal for titration applications. Its increased KCl outflow rate reduces contamination within the diaphragm/reference chamber, allowing for more stable measurements in low-electrolyte media. It's essential to clean the diaphragm chemically and note that this product does not come with a connecting cable; one must be ordered separately. The Me-E Pt 61 model has a shaft diameter of 12mm, a platinum diaphragm, an S7 connector, and operates at a temperature range of -5 to +</p> <ul> <li><strong>Category:</strong> Other sensors and general accessories</li> <li><strong>Sensor type:</strong> platinum, pin, Ø 1 mm</li> <li><strong>Shaft material:</strong> glass</li> <li><strong>Type:</strong> Me-E Pt 61</li> <li><strong>Parameters:</strong> redox</li> <li><strong>Storage solution:</strong> 3 mol/l KCl</li> <li><strong>Temperature sensor:</strong> without</li> <li><strong>Electrolyte:</strong> 3 mol/l KCl</li> <li><strong>Reference system:</strong> Silamid ®</li> <li><strong>Diaphragm:</strong> platinum</li> <li><strong>Shaft length:</strong> 170 mm</li> <li><strong>Connection:</strong> S7 connector</li> <li><strong>Ø Shaft:</strong> 12 mm</li> <li><strong>Operating temperature:</strong> -5 to +100 °C</li> </ul>
Product Detail
<p>A reliable solution for controlled synthesis, the Accessories Oxygen Sensor OXY DO7 falls under the category of other sensors and general accessories. This device is designed specifically for use with the OXY 7 system, featuring a fixed cable length of 3 meters (BNC/Cinch). Notably, it comes equipped with two replaceable membranes and an electrolyte solution, ensuring optimal performance and longevity in your oxygen measurement tasks.</p> <ul> <li><strong>Category:</strong> Other sensors and general accessories</li> <li><strong>Designation:</strong> Oxygen sensor OXY DO7 with fixed cable L 3 m (BNC/Cinch), 2 replaceable membranes and electrolyte solution</li> </ul>
Product Detail
<p>Designed with efficiency in synthetic processes in mind, this Climate Sensor With Bluetooth ® Impeller Probe (0.10 to 15.00 m/S) is an essential tool for measuring flow velocity, volume flow, and temperature at various points such as air outlets, poppet valves, ventilation grilles, or swirl diffusers. Its compact dimensions of 375 x 105 x 46 mm make it easy to maneuver in tight spaces, while its Bluetooth ® connectivity ensures a cordless and seamless connection to the testo 440 measuring device. The sensor's standard impeller probe and temperature measurement capabilities (-20.0 to +70.0 °C) provide accurate readings within a ±0.5 °C margin. Powered by 4 x 1.5 V AA batteries, this climate sensor offers a flow measuring range</p> <ul> <li><strong>Category:</strong> Other sensors and general accessories</li> <li><strong>Flow measuring range:</strong> 0.10 to 15.00 m/s</li> <li><strong>Flow accuracy:</strong> ±(0.1 m/s + 1.5% of measured value)</li> <li><strong>Radio range outdoors:</strong> 20 m</li> <li><strong>Temperature measuring range:</strong> -20.0 to +70.0 °C</li> <li><strong>L x W x D:</strong> 375 x 105 x 46 mm</li> <li><strong>Sensor type:</strong> impeller probe, standard</li> <li><strong>Power supply:</strong> 4 x 1.5 V AA batteries</li> <li><strong>Parameters:</strong> current temperature</li> <li><strong>Temperature accuracy:</strong> ±0.5 °C</li> <li><strong>Version:</strong> 0.10 to 15.00 m/s</li> </ul>
Product Detail
<p>Manufactured to meet research and production requirements, this AS/IDS-1.5 Accessories Connecting Cable for IDS Sensors is designed specifically for sensor applications. With a version featuring a length of 1.5 meters, it provides an optimal connection between the sensor and the measuring instrument. The cable boasts a 4-pole plug head on the device end, ensuring compatibility with the intended equipment.</p> <ul> <li><strong>Category:</strong> Other sensors and general accessories</li> <li><strong>Version:</strong> length 1.5 m</li> <li><strong>Connection:</strong> sensor: plug head device: specific (4-pole)</li> <li><strong>Type:</strong> AS/IDS-1.5</li> </ul>
Product Detail© 2023 Copyright. All Rights Reserved. Unit 19, Euroway House, Roydsdale Way, Bradford, BD4 6SE, UK
© 2023 Copyright. All Rights Reserved. Unit 19, Euroway House, Roydsdale Way, Bradford, BD4 6SE, UK
