Deliver to
United Kingdom
DIN-DVGW tested and approved. Acc. to DIN EN 15154-2:2006 and ANSI Z358.1-2014. Universal use, for wall or table mounting . With non-self-closing valve; the release lever locks by itself and the water is switched off again by simply unlocking this. Made of plastic, media-carrying parts made of brass. Silicone tube sheathed in stainless steel, length 1.5 m. Flow rate 7 l/min per shower head at a minimum operating pressure of 1 bar. Water connection ½″ internal thread, union nut. With rubber sleeves that protect against injuries Dust cover caps that open automatically upon actuation Integrated flow regulator for constant water jet, even with fluctuating pressure Extremely wide-spraying shower heads ensure water distribution over a large area Large holes in the shower heads protect against calcification Shower heads can be easily removed for maintenance purposes Adhesive information label for eye shower, 150 x 150 mm Hand-held eye shower angled at 45° with two spray heads
Product Detail
Material: stainless steel. Accessories for eye showers Connecting tube Connecting tube with stainless steel casing for eye showers and hand-held eye showers. DIN-DVGW tested and approved. Nominal size: DN 8 mm Operating pressure: 10 bar Media temperature: max. 70 °C Water connection: 1 / 2 ″ internal thread union nut Eye shower water drain: 1 / 2 ″ internal thread cone
Product Detail
Material: stainless steel, plastic. Accessories for eye showers Replacement spray head Premium, stainless steel Premium series high-power spray head for eye showers and hand-held eye showers made of stainless steel. Complete, with rubber sleeve and dust cap. Water connection: 1 / 2 ″ internal thread
Product Detail
DIN-DVGW tested and approved. Acc. to DIN EN 15154-2:2006 and ANSI Z358.1-2014. Universal use, for wall or table mounting . With non-self-closing valve; the release lever locks by itself and the water is switched off again by simply unlocking this. Made of plastic, media-carrying parts made of brass. Silicone tube sheathed in stainless steel, length 1.5 m. Flow rate 7 l/min per shower head at a minimum operating pressure of 1 bar. Water connection ½″ internal thread, union nut. With rubber sleeves that protect against injuries Dust cover caps that open automatically upon actuation Integrated flow regulator for constant water jet, even with fluctuating pressure Extremely wide-spraying shower heads ensure water distribution over a large area Large holes in the shower heads protect against calcification Shower heads can be easily removed for maintenance purposes Adhesive information label for eye shower, 150 x 150 mm Hand-held eye shower angled at 45° with a spray head
Product Detail
DIN-DVGW tested and approved. According to DIN EN 15154-2:2006 and ANSI Z358.1. With non-self-closing valve; the release lever locks by itself and the water is switched off again by simply unlocking the lever Made of plastic, media-carrying parts made of brass Stainless steel sheathed silicone hose, length 1.5 m Automatic flow regulation: flow rate of 7 l/min per shower head with a minimum operating pressure of 1 bar Water connection ½″ internal thread, union nut Drinking water protection via integrated backflow preventer Hand-held eye shower for diagonal installation with a spray head Delivery incl. information sign for eye shower acc. to DIN EN ISO 7010 and ASR A1.3, self-adhesive PVC film, 100 x 100 mm.
Product Detail
Material: POM. Accessories for eye showers Dust cap Dust cap with hinged closure for eye shower spray heads.
Product Detail
Material: POM, plastic. Accessories for eye showers Replacement spray head Classic High-power spray head for eye showers and hand-held eye showers. Complete, with rubber sleeve, dust cap. Water connection: 1 / 2 ″ internal thread
Product Detail
DIN-DVGW tested and approved. Acc. to DIN EN 15154-2:2006 and ANSI Z358.1. With non-self-closing valve; the release lever locks by itself and the water is switched off again by simply unlocking the lever Made of plastic, media-carrying parts made of brass Stainless steel sheathed silicone hose, length 1.5 m Automatic flow regulation: flow rate of 7 l/min per shower head with a minimum operating pressure of 1 bar Water connection ½″ internal thread, union nut Drinking water protection via integrated backflow preventer Hand-held eye shower for table mounting Angled at 45°, with two spray heads Delivery incl. table duct made of brass, mounting kit, sealing ring and information sign for eye shower according to DIN EN ISO 7010 and ASR A1.3, self-adhesive PVC film, 100 x 100 mm.
Product Detail
DIN-DVGW tested and approved. Acc. to DIN EN 15154-2:2006 and ANSI Z358.1-2014. For flush-type wall mounting or replacing the cold water tap. Made of brass, with chemical-resistant powder coating. Plastic spray plate. Two wide-spraying shower heads angled by 45°. Release lever with 90° actuation. Valve not self-closing. Water connection ½″ external thread. With rubber sleeves that protect against injuries Dust cover caps that open automatically upon actuation Integrated flow regulator for constant water jet, even with fluctuating pressure Extremely wide-spraying shower heads ensure water distribution over a large area Large holes in the shower heads protect against calcification Shower heads can be easily removed for maintenance purposes Adhesive information label for eye shower, 150 x 150 mm Eye wash for flush-type wall mounting
Product Detail
Material: stainless steel. Accessories for eye showers Connecting tube Connecting tube with stainless steel casing for eye showers and hand-held eye showers. DIN-DVGW tested and approved. Nominal size: DN 8 mm Operating pressure: 10 bar Media temperature: max. 70 °C Water connection: 1 / 2 ″ internal thread union nut Eye shower water drain: 1 / 2 ″ internal thread cone
Product Detail
M 22 x 1 external, 1 / 2 ″ internal. For connecting Kleen Eyes ® to taps with 1 / 2 ″ external thread. Adapter for eye wash Kleen Eyes ®
Product Detail
DIN-DVGW tested and approved. Acc. to DIN EN 15154-2:2006 and ANSI Z358.1-2014. Two shower heads angled at 45°, distributor fork and wall flange (water connection ¾″ internal thread) made of brass with chemical-resistant green powder coating. With a large release lever of 130 mm in length, with a large signal “PUSH”, photoluminescent as per DIN 67510. Maintenance-free ball valve, 90° operation, made of stainless steel, not self-closing. Flow rate 14–16 l/min at a minimum operating pressure of 1 bar. Dimensions: W (incl. lever) 330 x D 330 mm. With rubber sleeves that protect against injuries Dust cover caps that open automatically upon actuation Integrated flow regulator for constant water jet, even with fluctuating pressure Extremely wide-spraying shower heads ensure water distribution over a large area Large holes in the shower heads protect against calcification Shower heads can be easily removed for maintenance purposes Adhesive information label for eye shower, 150 x 150 mm Eye shower for surface-type wall mounting
Product Detail© 2023 Copyright. All Rights Reserved. Unit 19, Euroway House, Roydsdale Way, Bradford, BD4 6SE, UK
© 2023 Copyright. All Rights Reserved. Unit 19, Euroway House, Roydsdale Way, Bradford, BD4 6SE, UK
