Deliver to
United Kingdom
Material: polyester. For 0.2/0.5/0.65 and 1.5/2 ml tubes and other containers. Adhere to any plastic without drying out and falling off. Depending on the temperature resistance, e.g. for steam sterilisation, in boiling water baths, in refrigerators, in stirrers and shakers, centrifuges, etc. Extremely close-fitting and do not hinder the removal or loading of tubes in stands or centrifuges, etc. Tearproof. Sheet format US-Letter, 21,6 x 27,9 cm. Labels Tough Spots ® for laser printers round Temperature stability from: -196 °C to +100 °C. Assorted colours: 4 sheets each of blue, green, orange, red and yellow.
Product Detail
Material: vinyl. White, angular cornered labels with acrylate-based adhesive backing. Excellent adhesion to plastic, glass or metal at low temperatures without drying out or peeling off. Care must be taken to ensure that glass and metallic surfaces are absolutely free of oil and grease. Resistant to abrasion, chemicals and moisture. Can be used for refrigerators and freezers and in cryo conditions (liquid nitrogen) (for Cryo Tags ® ). Can be removed without leaving any residue. Coated for use with a resin ribbon. Designed for high resolution and very precise labelling, e.g. for barcode. Suitable for most thermal transfer printers. Wound externally, 25.4 mm (1 inch) roll core, 2000 labels per roll . Thermal transfer labels Cryo-Tags ® Temperature stability from: -196 °C to +80 °C.
Product Detail
Material: vinyl. Autoclavable: yes. White, angular cornered labels with acrylate-based adhesive backing. Excellent adhesion to plastic, glass or metal at low temperatures without drying out or peeling off. Care must be taken to ensure that glass and metallic surfaces are absolutely free of oil and grease. Resistant to abrasion, chemicals and moisture. Can be used for refrigerators and freezers and in cryo conditions (liquid nitrogen) (for Cryo Tags ® ). Can be removed without leaving any residue. Coated for use with a resin ribbon. Designed for high resolution and very precise labelling, e.g. for barcode. Suitable for most thermal transfer printers. Wound externally, 25.4 mm (1 inch) roll core, 2000 labels per roll . Thermal transfer labels Tough Tags ® Temperature stability from: -40 °C to +150 °C.
Product Detail
Material: paper, wood-free. Rectangular labels, white, matt. Labels on DIN A4 sheets Impregnated paper With high strength, rubber-based adhesive. Latex-impregnated surface is water repellent. Suitable for laser printers and copiers. Temperature stable from -5 to +80 °C.
Product Detail
Acrylate-based. Adhere to plastic, glass and metal without drying out or flaking off. Care must be taken to ensure that glass and metallic surfaces are absolutely free of oil and grease. Can even be used in boiling water baths, refrigerators, and under cryo conditions (liquid nitrogen). Can be removed without leaving any residue. Sheet format US-Letter, 21,6 x 27,9 cm, sheet can be laser-printed. Temperature stability from: -196 °C to +79 °C . Cryogenic labels on a sheet assorted colours 4 sheets of each: blue, green, orange, red, yellow
Product Detail
Material: plastic. For long-term storage in liquid nitrogen or dry ice. Adheres to frozen surfaces down to -80 °C without the need for thawing. Good chemical resistance, especially to alcohols (immersion up to 15 minutes) and xylene (immersion up to 30 minutes). Can also be used in water baths. Temperature stability: -196 to +70 °C. Suitable for most common direct thermal printers. Direct thermal labels CryoSTUCK ® Square
Product Detail
Material: polyester. For manual labelling, can be marked with almost any pen. Adhere to any plastic without drying out and falling off. Depending on the temperature resistance, e.g. for steam sterilisation, in boiling water baths, in refrigerators, in stirrers and shakers, centrifuges, etc. Extremely close-fitting and do not hinder the removal or loading of tubes in stands or centrifuges, etc. Tearproof. Assorted colours: 1000 labels each of yellow, lavender, blue, green, red. Labels Tough Spots ® on a roll round Temperature stability from: -196 °C to +80 °C.
Product Detail
Material: PET. Rectangular labels, white, matt. Labels on DIN A4 sheets PET, chemical resistant With permanent acrylic adhesive. Suitable for laser printers, copiers and inkjet printers (with solvent based inks only). Weather resistant and suitable for outdoor use. Saltwater resistant and resistant to many solvents, diluted acids and alkalis. Temperature stable from -20 to +100 °C.
Product Detail
Acrylate-based. Adhere to plastic, glass and metal without drying out or flaking off. Care must be taken to ensure that glass and metallic surfaces are absolutely free of oil and grease. Can even be used in boiling water baths, refrigerators, and under cryo conditions (liquid nitrogen). Can be removed without leaving any residue. Sheet format US-Letter, 21,6 x 27,9 cm, sheet can be laser-printed. Temperature stability from: -196 °C to +79 °C . Cryogenic labels on a sheet white
Product Detail
Acrylate-based. Adhere to plastic, glass and metal without drying out or flaking off. Care must be taken to ensure that glass and metallic surfaces are absolutely free of oil and grease. Can even be used in boiling water baths, refrigerators, and under cryo conditions (liquid nitrogen). Can be removed without leaving any residue. Sheet format US-Letter, 21,6 x 27,9 cm, sheet can be laser-printed. Temperature stability from: -196 °C to +79 °C . Cryogenic labels on a sheet green
Product Detail
Acrylate-based. Adhere to plastic, glass and metal without drying out or flaking off. Care must be taken to ensure that glass and metallic surfaces are absolutely free of oil and grease. Can even be used in boiling water baths, refrigerators, and under cryo conditions (liquid nitrogen). Can be removed without leaving any residue. Sheet format US-Letter, 21,6 x 27,9 cm, sheet can be laser-printed. Temperature stability from: -196 °C to +79 °C . Cryogenic labels on a sheet assorted colours 4 sheets of each: blue, green, orange, red, yellow
Product Detail
Acrylate-based. Adhere to plastic, glass and metal without drying out or flaking off. Care must be taken to ensure that glass and metallic surfaces are absolutely free of oil and grease. Can even be used in boiling water baths, refrigerators, and under cryo conditions (liquid nitrogen). Can be removed without leaving any residue. Sheet format US-Letter, 21,6 x 27,9 cm, sheet can be laser-printed. Temperature stability from: -196 °C to +79 °C . Cryogenic labels on a sheet green
Product Detail© 2023 Copyright. All Rights Reserved. Unit 19, Euroway House, Roydsdale Way, Bradford, BD4 6SE, UK
© 2023 Copyright. All Rights Reserved. Unit 19, Euroway House, Roydsdale Way, Bradford, BD4 6SE, UK
