Produced to ensure dependable processing results, the Sensor Tetracon ® 925 Series with IDS Technology is designed for use with IDS-compatible output devices like MultiLine ® IDS and inoLab ® Multi IDS. Its unique IDS technology converts measurement signals into digital signals within the sensor head, providing interference-free and accurate transmission to IDS devices. It stores sensor ID, calibration data, and measurement settings, enabling seamless operation across various IDS devices without recalibration. Additionally, it features a memory capacity for up to 10 calibrations, an integrated temperature gauge for temperature-compensated measurements, and a cell constant of 0.475 cm-1. This versatile sensor is suitable for medium to high conductivity applications, offering a measuring range of 1 μS/cm to 2000 mS/cm for conductivity, 0 mg

• Category: Conductivity sensors
• TDS accuracy: ±0.5% of the measured value
• Temperature accuracy: ±0.2 °C
• Version: with fixed cable (1.5 m)
• IP rating: 67
• Salinity accuracy: ±0.5% of the measured value
• Cell constant: 0,475 cm -1
• Temperature sensor: NTC 30 kΩ
• Conductivity measuring range: 1 µS/cm to 2000 mS/cm
• Type: TetraCon ® 925
• Salinity measuring range: 0 mg/l to 70 g/l
• Parameters: conductivity salinity TDS temperature
• TDS measuring range: 0 mg/l to 200 g/l
• Conductivity accuracy: ±0.5% of the measured value
• Connection: specific (4-pole)
• Shaft material: epoxid
• Ø Shaft: 15.3 mm
• Cell type: 4 graphite pins
• Operating temperature: 0 to +100 °C
• Shaft length: 120 mm