Deliver to
United Kingdom
<p>Produced for stability across temperature-sensitive applications, the VACUU PURE 10, a member of the vacuum pumps category, stands out as an ideal choice for coarse and fine vacuum applications. With its oil-free design, it ensures zero abrasion and minimal wear, making it suitable for processes up to 10 -3 mbar. Its resistance to condensation eliminates the need for gas ballasts in applications producing large volumes of vapor. After use, the quick-drying pump features an integrated regeneration mode, significantly boosting sample throughput. Weighing 21.1 kg and measuring 507 x 269 x 413 mm, this dry-running screw pump is perfect for evacuating large systems without requiring frequent pump changes. Ideal for air and neutral gases, as well as vapors, the VACUU PURE 10 serves as</p> <ul> <li><strong>Category:</strong> Vacuum pumps</li> <li><strong>Inlet connection:</strong> KF DN 25 small flange</li> <li><strong>Suction capacity (m³/h):</strong> 10.0</li> <li><strong>Mains connection:</strong> 100-230 V, 50/60 Hz</li> <li><strong>Weight:</strong> 21,1 kg</li> <li><strong>L x W x H:</strong> 507 x 269 x 413 mm</li> <li><strong>Noise level:</strong> 52 db</li> <li><strong>Motor power:</strong> 700 W</li> <li><strong>End vacuum (abs.):</strong> 5x10 -3 mbar</li> <li><strong>Suction capacity (l/min):</strong> 167.0</li> <li><strong>Materials in contact with media:</strong> spindle: PEEK stator: aluminium end shield: aluminium</li> <li><strong>Media temperature:</strong> +10 - +40 °C</li> <li><strong>Outlet connection:</strong> KF DN 25 small flange</li> <li><strong>Ambient temperature:</strong> +10 - +40 °C</li> <li><strong>Type:</strong> VACUU PURE 10</li> </ul>
Product Detail
<p>Intended for structured formulation workflows, the Diaphragm Vacuum Pump MD 4 Series MD 4C NT is a three-stage, high-power device designed for continuous, oil-free evacuation and conveying of gases and vapors. This pump offers an extremely high delivery rate approaching the end vacuum, making it a suitable alternative to rotary pumps in various lab applications. Its exceptional chemical resistance and high vapor and condensate resistance, coupled with an integrated gas ballast valve, make it ideal for handling aggressive and corrosive substances, such as those encountered in rotary evaporators, drying ovens, gel dryers, and numerous other laboratory vacuum applications without solvent recovery. With a weight of 14.3 kg, this pump operates on a 230 V, 50/60 Hz mains connection and delivers a suction capacity of</p> <ul> <li><strong>Category:</strong> Vacuum pumps</li> <li><strong>Motor power:</strong> 250 W</li> <li><strong>Inlet connection:</strong> for hose inner Ø 8 mm</li> <li><strong>Outlet connection:</strong> for hose inner Ø 8 mm</li> <li><strong>End vacuum (abs.):</strong> 1,5 mbar</li> <li><strong>Suction capacity (m³/h):</strong> 3.4</li> <li><strong>Mains connection:</strong> 230 V, 50/60 Hz</li> <li><strong>Cylinder:</strong> 4</li> <li><strong>End vacuum abs. with gas ballast:</strong> 3 mbar</li> <li><strong>Materials in contact with media:</strong> ETFE pump head, carbon fibre-reinforced diaphragms: PTFE valves: FFKM</li> <li><strong>Suction capacity (l/min):</strong> 57.0</li> <li><strong>Type:</strong> MD 4C NT</li> <li><strong>Overpressure:</strong> 0,1 bar</li> <li><strong>Weight:</strong> 14,3 kg</li> <li><strong>Steps:</strong> 3</li> <li><strong>Ambient temperature:</strong> +10 - +40 °C</li> <li><strong>IP rating:</strong> 40</li> <li><strong>Media temperature:</strong> +10 - +40 °C</li> </ul>
Product Detail
<p>Engineered for consistent performance, the Diaphragm Vacuum Pump Mz 2C NT is designed for continuous, oil-free evacuation and conveying of aggressive and corrosive gases and vapors. This two-stage diaphragm vacuum pump offers an optimal balance between high delivery rate and good end vacuum, making it suitable for various laboratory applications such as rotary evaporators, vacuum concentrators, and gel dryers. Its robust design ensures excellent stability even for rough chemical applications, while its materials in contact with media—made of highly chemical-resistant fluoroplastics—extend its versatility across numerous chemical and pharmaceutical industry applications. The Mz 2C NT series boasts particularly quiet, low-vibration operation, high gas-tightness, and improved performance characteristics.</p> <ul> <li><strong>Category:</strong> Vacuum pumps</li> <li><strong>Media temperature:</strong> +10 - +40 °C</li> <li><strong>Cylinder:</strong> 2</li> <li><strong>Outlet connection:</strong> for hose inner Ø 8-10 mm</li> <li><strong>Ambient temperature:</strong> +10 - +40 °C</li> <li><strong>Materials in contact with media:</strong> ETFE pump head, carbon fibre-reinforced diaphragms: PTFE valves: FFKM</li> <li><strong>Mains connection:</strong> 230 V, 50/60 Hz</li> <li><strong>Suction capacity (m³/h):</strong> 2.0</li> <li><strong>Noise level:</strong> 45 db</li> <li><strong>Steps:</strong> 2</li> <li><strong>Suction capacity (l/min):</strong> 33.0</li> <li><strong>W x D x H:</strong> 243 x 243 x 198 mm</li> <li><strong>Weight:</strong> 11,1 kg</li> <li><strong>Inlet connection:</strong> for hose inner Ø 8-10 mm</li> <li><strong>Type:</strong> MZ 2C NT</li> <li><strong>IP rating:</strong> 40</li> <li><strong>Motor power:</strong> 180 W</li> <li><strong>End vacuum (abs.):</strong> 7 mbar</li> <li><strong>End vacuum abs. with gas ballast:</strong> 12 mbar</li> </ul>
Product Detail
<p>Widely applied in chemical workflows, the Screw Pump Vacuu Pure 10C, categorized under vacuum pumps, boasts an impressive weight of 21.5 kg and dimensions of L x W x H: 507 x 269 x 413 mm. This dry-running screw pump, powered by a 700 W motor, operates quietly at a noise level of 52 db, making it suitable for various laboratory settings. With a suction capacity of l/min: 150.0 and m³/h: 9.0, it efficiently handles large systems without requiring frequent pump changes. Its high resistance to condensation eliminates the need for gas ballast in applications producing large volumes of vapor. Post-process quick-drying is facilitated by its integrated regeneration mode, enhancing sample throughput. Constructed with materials such as P</p> <ul> <li><strong>Category:</strong> Vacuum pumps</li> <li><strong>Materials in contact with media:</strong> spindle: PEEK stator: PEEK end shield: PEEK</li> <li><strong>Suction capacity (l/min):</strong> 150.0</li> <li><strong>Motor power:</strong> 700 W</li> <li><strong>Weight:</strong> 21,5 kg</li> <li><strong>Noise level:</strong> 52 db</li> <li><strong>Suction capacity (m³/h):</strong> 9.0</li> <li><strong>Type:</strong> VACUU PURE 10C</li> <li><strong>Mains connection:</strong> 100-230 V, 50/60 Hz</li> <li><strong>Inlet connection:</strong> KF DN 25 small flange</li> <li><strong>L x W x H:</strong> 507 x 269 x 413 mm</li> <li><strong>Ambient temperature:</strong> +10 - +40 °C</li> <li><strong>Media temperature:</strong> +10 - +40 °C</li> <li><strong>End vacuum (abs.):</strong> 5x10 -3 mbar</li> <li><strong>Outlet connection:</strong> KF DN 25 small flange</li> </ul>
Product Detail
<p>Engineered to maintain reliability in process-driven workflows, the Diaphragm Vacuum Pump Md 4 Series Md 4 Nt is a three-stage, high-power vacuum pump designed for continuous, oil-free evacuation and conveying of gases and vapors. This vacuum technology product features an extremely high delivery rate that nearly reaches the end vacuum, making it suitable as a replacement for rotary pumps. The Md 4 Nt series offers particularly quiet, low-vibration operation, high gas-tightness, and improved performance characteristics. With an extended diaphragm service life, this vacuum pump is ideal for meeting the high vacuum requirements of physics and analytical applications. It is specifically engineered for non-aggressive gases and vapors, such as those used in degassing viscous media and boosting turbomolecular pumps.</p> <ul> <li><strong>Category:</strong> Vacuum pumps</li> <li><strong>Steps:</strong> 3</li> <li><strong>Mains connection:</strong> 230 V, 50/60 Hz</li> <li><strong>Inlet connection:</strong> KF DN 16 small flange</li> <li><strong>Weight:</strong> 16,4 kg</li> <li><strong>Suction capacity (m³/h):</strong> 3.8</li> <li><strong>Suction capacity (l/min):</strong> 63.0</li> <li><strong>Motor power:</strong> 250 W</li> <li><strong>End vacuum (abs.):</strong> 1 mbar</li> <li><strong>Type:</strong> MD 4 NT</li> <li><strong>IP rating:</strong> 40</li> <li><strong>Cylinder:</strong> 4</li> <li><strong>Media temperature:</strong> +10 - +40 °C</li> <li><strong>Ambient temperature:</strong> +10 - +40 °C</li> <li><strong>Outlet connection:</strong> G 1 / 4 ″ silencer</li> <li><strong>Overpressure:</strong> 0,1 bar</li> <li><strong>Materials in contact with media:</strong> pump head: aluminium alloy diaphragms: FPM valves: FPM</li> </ul>
Product Detail
<p>Engineered to maintain reliability in process-driven workflows, the Diaphragm Vacuum Pump Md 4 Series Md 4 Nt is a three-stage, high-power vacuum pump designed for continuous, oil-free evacuation and conveying of gases and vapors. This vacuum technology product features an extremely high delivery rate that nearly reaches the end vacuum, making it suitable as a replacement for rotary pumps. The Md 4 Nt series offers particularly quiet, low-vibration operation, high gas-tightness, and improved performance characteristics. With an extended diaphragm service life, this vacuum pump is ideal for meeting the high vacuum requirements of physics and analytical applications. It is specifically engineered for non-aggressive gases and vapors, such as those used in degassing viscous media and boosting turbomolecular pumps.</p> <ul> <li><strong>Category:</strong> Vacuum pumps</li> <li><strong>Steps:</strong> 3</li> <li><strong>Mains connection:</strong> 230 V, 50/60 Hz</li> <li><strong>Inlet connection:</strong> KF DN 16 small flange</li> <li><strong>Weight:</strong> 16,4 kg</li> <li><strong>Suction capacity (m³/h):</strong> 3.8</li> <li><strong>Suction capacity (l/min):</strong> 63.0</li> <li><strong>Motor power:</strong> 250 W</li> <li><strong>End vacuum (abs.):</strong> 1 mbar</li> <li><strong>Type:</strong> MD 4 NT</li> <li><strong>IP rating:</strong> 40</li> <li><strong>Cylinder:</strong> 4</li> <li><strong>Media temperature:</strong> +10 - +40 °C</li> <li><strong>Ambient temperature:</strong> +10 - +40 °C</li> <li><strong>Outlet connection:</strong> G 1 / 4 ″ silencer</li> <li><strong>Overpressure:</strong> 0,1 bar</li> <li><strong>Materials in contact with media:</strong> pump head: aluminium alloy diaphragms: FPM valves: FPM</li> </ul>
Product Detail
<p>Widely applied in chemical workflows, the Screw Pump Vacuu Pure 10C, categorized under vacuum pumps, boasts an impressive weight of 21.5 kg and dimensions of L x W x H: 507 x 269 x 413 mm. This dry-running screw pump, powered by a 700 W motor, operates quietly at a noise level of 52 db, making it suitable for various laboratory settings. With a suction capacity of l/min: 150.0 and m³/h: 9.0, it efficiently handles large systems without requiring frequent pump changes. Its high resistance to condensation eliminates the need for gas ballast in applications producing large volumes of vapor. Post-process quick-drying is facilitated by its integrated regeneration mode, enhancing sample throughput. Constructed with materials such as P</p> <ul> <li><strong>Category:</strong> Vacuum pumps</li> <li><strong>Materials in contact with media:</strong> spindle: PEEK stator: PEEK end shield: PEEK</li> <li><strong>Suction capacity (l/min):</strong> 150.0</li> <li><strong>Motor power:</strong> 700 W</li> <li><strong>Weight:</strong> 21,5 kg</li> <li><strong>Noise level:</strong> 52 db</li> <li><strong>Suction capacity (m³/h):</strong> 9.0</li> <li><strong>Type:</strong> VACUU PURE 10C</li> <li><strong>Mains connection:</strong> 100-230 V, 50/60 Hz</li> <li><strong>Inlet connection:</strong> KF DN 25 small flange</li> <li><strong>L x W x H:</strong> 507 x 269 x 413 mm</li> <li><strong>Ambient temperature:</strong> +10 - +40 °C</li> <li><strong>Media temperature:</strong> +10 - +40 °C</li> <li><strong>End vacuum (abs.):</strong> 5x10 -3 mbar</li> <li><strong>Outlet connection:</strong> KF DN 25 small flange</li> </ul>
Product Detail
<p>Intended for structured formulation workflows, the Diaphragm Vacuum Pump MD 4 Series MD 4C NT is a three-stage, high-power device designed for continuous, oil-free evacuation and conveying of gases and vapors. This pump offers an extremely high delivery rate approaching the end vacuum, making it a suitable alternative to rotary pumps in various lab applications. Its exceptional chemical resistance and high vapor and condensate resistance, coupled with an integrated gas ballast valve, make it ideal for handling aggressive and corrosive substances, such as those encountered in rotary evaporators, drying ovens, gel dryers, and numerous other laboratory vacuum applications without solvent recovery. With a weight of 14.3 kg, this pump operates on a 230 V, 50/60 Hz mains connection and delivers a suction capacity of</p> <ul> <li><strong>Category:</strong> Vacuum pumps</li> <li><strong>Motor power:</strong> 250 W</li> <li><strong>Inlet connection:</strong> for hose inner Ø 8 mm</li> <li><strong>Outlet connection:</strong> for hose inner Ø 8 mm</li> <li><strong>End vacuum (abs.):</strong> 1,5 mbar</li> <li><strong>Suction capacity (m³/h):</strong> 3.4</li> <li><strong>Mains connection:</strong> 230 V, 50/60 Hz</li> <li><strong>Cylinder:</strong> 4</li> <li><strong>End vacuum abs. with gas ballast:</strong> 3 mbar</li> <li><strong>Materials in contact with media:</strong> ETFE pump head, carbon fibre-reinforced diaphragms: PTFE valves: FFKM</li> <li><strong>Suction capacity (l/min):</strong> 57.0</li> <li><strong>Type:</strong> MD 4C NT</li> <li><strong>Overpressure:</strong> 0,1 bar</li> <li><strong>Weight:</strong> 14,3 kg</li> <li><strong>Steps:</strong> 3</li> <li><strong>Ambient temperature:</strong> +10 - +40 °C</li> <li><strong>IP rating:</strong> 40</li> <li><strong>Media temperature:</strong> +10 - +40 °C</li> </ul>
Product Detail
<p>Produced for stability across temperature-sensitive applications, the VACUU PURE 10, a member of the vacuum pumps category, stands out as an ideal choice for coarse and fine vacuum applications. With its oil-free design, it ensures zero abrasion and minimal wear, making it suitable for processes up to 10 -3 mbar. Its resistance to condensation eliminates the need for gas ballasts in applications producing large volumes of vapor. After use, the quick-drying pump features an integrated regeneration mode, significantly boosting sample throughput. Weighing 21.1 kg and measuring 507 x 269 x 413 mm, this dry-running screw pump is perfect for evacuating large systems without requiring frequent pump changes. Ideal for air and neutral gases, as well as vapors, the VACUU PURE 10 serves as</p> <ul> <li><strong>Category:</strong> Vacuum pumps</li> <li><strong>Inlet connection:</strong> KF DN 25 small flange</li> <li><strong>Suction capacity (m³/h):</strong> 10.0</li> <li><strong>Mains connection:</strong> 100-230 V, 50/60 Hz</li> <li><strong>Weight:</strong> 21,1 kg</li> <li><strong>L x W x H:</strong> 507 x 269 x 413 mm</li> <li><strong>Noise level:</strong> 52 db</li> <li><strong>Motor power:</strong> 700 W</li> <li><strong>End vacuum (abs.):</strong> 5x10 -3 mbar</li> <li><strong>Suction capacity (l/min):</strong> 167.0</li> <li><strong>Materials in contact with media:</strong> spindle: PEEK stator: aluminium end shield: aluminium</li> <li><strong>Media temperature:</strong> +10 - +40 °C</li> <li><strong>Outlet connection:</strong> KF DN 25 small flange</li> <li><strong>Ambient temperature:</strong> +10 - +40 °C</li> <li><strong>Type:</strong> VACUU PURE 10</li> </ul>
Product Detail
<p>Engineered for consistent performance, the Diaphragm Vacuum Pump Mz 2C NT is designed for continuous, oil-free evacuation and conveying of aggressive and corrosive gases and vapors. This two-stage diaphragm vacuum pump offers an optimal balance between high delivery rate and good end vacuum, making it suitable for various laboratory applications such as rotary evaporators, vacuum concentrators, and gel dryers. Its robust design ensures excellent stability even for rough chemical applications, while its materials in contact with media—made of highly chemical-resistant fluoroplastics—extend its versatility across numerous chemical and pharmaceutical industry applications. The Mz 2C NT series boasts particularly quiet, low-vibration operation, high gas-tightness, and improved performance characteristics.</p> <ul> <li><strong>Category:</strong> Vacuum pumps</li> <li><strong>Media temperature:</strong> +10 - +40 °C</li> <li><strong>Cylinder:</strong> 2</li> <li><strong>Outlet connection:</strong> for hose inner Ø 8-10 mm</li> <li><strong>Ambient temperature:</strong> +10 - +40 °C</li> <li><strong>Materials in contact with media:</strong> ETFE pump head, carbon fibre-reinforced diaphragms: PTFE valves: FFKM</li> <li><strong>Mains connection:</strong> 230 V, 50/60 Hz</li> <li><strong>Suction capacity (m³/h):</strong> 2.0</li> <li><strong>Noise level:</strong> 45 db</li> <li><strong>Steps:</strong> 2</li> <li><strong>Suction capacity (l/min):</strong> 33.0</li> <li><strong>W x D x H:</strong> 243 x 243 x 198 mm</li> <li><strong>Weight:</strong> 11,1 kg</li> <li><strong>Inlet connection:</strong> for hose inner Ø 8-10 mm</li> <li><strong>Type:</strong> MZ 2C NT</li> <li><strong>IP rating:</strong> 40</li> <li><strong>Motor power:</strong> 180 W</li> <li><strong>End vacuum (abs.):</strong> 7 mbar</li> <li><strong>End vacuum abs. with gas ballast:</strong> 12 mbar</li> </ul>
Product Detail© 2023 Copyright. All Rights Reserved. Unit 19, Euroway House, Roydsdale Way, Bradford, BD4 6SE, UK
© 2023 Copyright. All Rights Reserved. Unit 19, Euroway House, Roydsdale Way, Bradford, BD4 6SE, UK
