Deliver to
United Kingdom
For determining conductivity/salinity/TDS. Large colour touchscreen (7″) for straightforward data input and direct measurements Simple and intuitive operation. On-screen instructions provide step-by-step guidance through the programs (e. g. sensor calibration). Screen display can be adjusted for specific requirements. Full-screen mode displays all information, while the details screen only shows the most important measurement information with large digits. Calibration can be performed with predefined and user-specific buffers and buffer groups. Verification mode enables checking of the current sensor status. Electrode arm can be operated easily with one hand. Simple and safe electrode handling via specific positions for cleaning and storage. Precise positioning via vertical and horizontal movements. Traceable documentation. With each measurement, data such as the timestamp or sample and sensor ID is saved and automatically printed or exported. Two-level user management (administrator, operator) prevents unwanted changes to device settings. Internal measurement data memory: save by pressing a key or with time-controlled, measuring intervals Intelligent Sensor Management (ISM ® ) for automatic recognition of ISM ® sensors and reading in calibration data Benchtop conductivity meters SevenDirect™ SD30 Pure H2O kit With conductivity sensor for samples with low conductivity, such as pure and high-purity water.InLab ® 741-ISM ® with integrated temperature gauge. Measuring range: 0.001 to 500 μS/cm. Stainless steel shaft, L/Ø: 120/12 mm. Operating range: 0 to +100 °C. Delivery incl. InLab ® 741-ISM ® conductivity sensor, test solutions (1413 μS/cm, 2 x 20 ml), electrode holder and protective cover.
Product Detail
Space-saving design with large display Simple, user-friendly menu Automatic calibration with three predefined standards Automatic or manual temperature correction Automatically or manually end a measurement; with acoustic and visual endpoint signal Saves the current calibration Selectable reference temperature With robust conductivity sensor for medium to very high conductivity: LE703 with integrated temperature gauge. Measuring range: 0.01 to 200 S/cm. Plastic shaft, L/Ø: 120/12 mm. Operating range: 0 to +80 °C. Benchtop conductivity meters FiveEasy™ F30 Standard Kit Delivery incl. conductivity electrode type LE703, test solutions (1413 μS/cm and 12.88 mS/cm, each with 2 x 20 ml sachets), electrode arm and mains adapter.
Product Detail
Ideal for routine measurements in laboratories. Large, clear LCD display with all important information at a glance Intuitive operation through simple keyboard Reproducible measurement results through automatic AutoRead function with automatic recognition of stable measured values Easy calibration with adjustable calibration timer Benchtop conductivity meter inoLab ® Cond 7110 Basic Delivery incl. electrode holder, power supply unit and batteries. Without conductivity sensor, please order separately.
Product Detail
Ideal for routine measurements in laboratories. Large, clear LCD display with all important information at a glance Intuitive operation through simple keyboard Reproducible measurement results through automatic AutoRead function with automatic recognition of stable measured values Easy calibration with adjustable calibration timer Benchtop conductivity meter inoLab ® Cond 7110 Set 1 Delivery incl. conductivity sensor TetraCon ® 325, buffer solution (1413 μS/cm), electrode holder, power supply unit and batteries.
Product Detail
For determining conductivity/salinity/TDS. Large colour touchscreen (7″) for straightforward data input and direct measurements Simple and intuitive operation. On-screen instructions provide step-by-step guidance through the programs (e. g. sensor calibration). Screen display can be adjusted for specific requirements. Full-screen mode displays all information, while the details screen only shows the most important measurement information with large digits. Calibration can be performed with predefined and user-specific buffers and buffer groups. Verification mode enables checking of the current sensor status. Electrode arm can be operated easily with one hand. Simple and safe electrode handling via specific positions for cleaning and storage. Precise positioning via vertical and horizontal movements. Traceable documentation. With each measurement, data such as the timestamp or sample and sensor ID is saved and automatically printed or exported. Two-level user management (administrator, operator) prevents unwanted changes to device settings. Internal measurement data memory: save by pressing a key or with time-controlled, measuring intervals Intelligent Sensor Management (ISM ® ) for automatic recognition of ISM ® sensors and reading in calibration data Benchtop conductivity meters SevenDirect™ SD30 Standard kit With conductivity sensor for moderate to very high conductivities:InLab ® 731-ISM ® with integrated temperature sensor, measuring range: 0.01 to 1000 mS/cm, plastic shaft, shaft length/Ø: 120/12 mm, application range 0 to +100 °C. Delivery incl. InLab ® 731-ISM ® conductivity sensor, buffer solutions (1413 μS/cm and 12.88 mS/cm, each 2 x 20 ml), electrode holder and protective cover.
Product Detail
Large LCD display, backlit with simultaneous display of conductivity and temperature Automatic calibration with display of the calibrated ranges, stores the current calibration Automatic and manual temperature correction Confirmation when a stable measured value is reached Reference temperature, adjustable cell constant and temperature coefficient Benchtop conductivity meters COND 50 VioLab Basic Delivery incl. test solutions (1413 μS/cm and 12.88 mS/cm), electrode holder and mains adapter. Without conductivity sensor, please order separately.
Product Detail
For determining conductivity/salinity/TDS. Large colour touchscreen (7″) for straightforward data input and direct measurements Simple and intuitive operation. On-screen instructions provide step-by-step guidance through the programs (e. g. sensor calibration). Screen display can be adjusted for specific requirements. Full-screen mode displays all information, while the details screen only shows the most important measurement information with large digits. Calibration can be performed with predefined and user-specific buffers and buffer groups. Verification mode enables checking of the current sensor status. Electrode arm can be operated easily with one hand. Simple and safe electrode handling via specific positions for cleaning and storage. Precise positioning via vertical and horizontal movements. Traceable documentation. With each measurement, data such as the timestamp or sample and sensor ID is saved and automatically printed or exported. Two-level user management (administrator, operator) prevents unwanted changes to device settings. Internal measurement data memory: save by pressing a key or with time-controlled, measuring intervals Intelligent Sensor Management (ISM ® ) for automatic recognition of ISM ® sensors and reading in calibration data Benchtop conductivity meters SevenDirect™ SD30 Basic Delivery incl. electrode holder and protective casing. Without conductivity sensor, please order separately.
Product Detail
Large LCD display, backlit with simultaneous display of conductivity and temperature Automatic calibration with display of the calibrated ranges, stores the current calibration Automatic and manual temperature correction Confirmation when a stable measured value is reached Reference temperature, adjustable cell constant and temperature coefficient Benchtop conductivity meters COND 50 VioLab Set 2301T conductivity sensor with integrated temperature gauge. Measuring range: 10 μS to 200 mS/cm. Steel shaft, length/Ø: 120/12 mm. Operating range: 0 to +60 °C. Delivery incl. 2301T conductivity sensor, test solutions (1413 μS/cm and 12.88 mS/cm), electrode holder and mains adapter.
Product Detail© 2023 Copyright. All Rights Reserved. Unit 19, Euroway House, Roydsdale Way, Bradford, BD4 6SE, UK
© 2023 Copyright. All Rights Reserved. Unit 19, Euroway House, Roydsdale Way, Bradford, BD4 6SE, UK
