Deliver to
United Kingdom
Extension cable for moisture sensor. Accessories extension cable for leakage monitors I and II
Product Detail
Material: SAN. For easy visual monitoring of flow rates. With ball and two hose connectors. Minimum flow rate of 140 ml/min for fluids and 8 l/min for gases. Connectors for hose internal Ø 6.5-10 mm. Flow indicator with ball
Product Detail
Material: SAN. With two hose nozzles (L 25 mm, Ø 6–11 mm). Minimum flow rate 150 ml/min. Flow indicator with impeller made from styrene-acrylonitrile Suitable for water and similar liquids.
Product Detail
For monitoring all equipment powered by water. Reliably prevents flooding by automatically cutting off the water using the solenoid valve. When the highly sensitive moisture sensor detects a water film of 0.5 mm, it will set off an audible alarm and close the solenoid valve. Plug housing with earthed plug connection and earthed socket. Leakage monitor Model I Delivery incl. moisture sensor, solenoid valve and alarm buzzer.
Product Detail
Material: SAN. With two hose nozzles (L 25 mm, Ø 6–11 mm). Minimum flow rate 150 ml/min. Flow indicator with impeller made from styrene-acrylonitrile Suitable for water and similar liquids.
Product Detail
Material: SAN. With two hose nozzles (L 25 mm, Ø 6–11 mm). Minimum flow rate 150 ml/min. Flow indicator with impeller made from styrene-acrylonitrile Suitable for water and similar liquids.
Product Detail
Extension cable for moisture sensor. Accessories extension cable for leakage monitors I and II
Product Detail
Extension cable for moisture sensor. Accessories extension cable for leakage monitors I and II
Product Detail
Material: stainless steel 1.4571. External temperature gauge Pt 100 with LEMO connector. Temperature gauge Pt 100 for AQUASTOP ® II Delivery incl. connection cable.
Product Detail
Material: PMP. With two hose nozzles (L 25 mm, Ø 6–11 mm). Minimum flow rate 150 ml/min. Flow indicator with impeller made of polymethylpentene Can be sterilised. Highly chemical-resistant.
Product Detail
For monitoring cooling water flow and temperature in the laboratory. For installation in apparatus that runs without permanent supervision. Power supply and water supply are cut off in case of irregularities or when the preset temperature limit is exceeded. Application: If the flow rate drops below the preset minimum level, the solenoid valve shuts off the coolant supply and connected electrical device (e.g. heating mantle) is de-energised. If the maximum temperature is exceeded, the solenoid valve stays open, the apparatus continues to be cooled and the electrical device is de-energised. The temperature at the coolant outlet is recorded by the internal NTC sensor integrated in the flow sensor. As an option, an external Pt 100 temperature sensor which automatically deactivates the internal sensor can be installed in a freely selectable position on the test set-up (if required, please order separately). Features: 2-line LED display for simultaneous display of flow rate and temperature LED for switching status and alarm indication Freely selectable alarm limits Acoustic pre-alarm alerts user before final deactivation With Schuko socket on the back Laboratory cooling water monitor AQUASTOP ® II Delivery incl. solenoid valve, flow sensor with internal NTC sensor and hose connector (for hose internal Ø 10 mm).
Product Detail
Material: PMP. With two hose nozzles (L 25 mm, Ø 6–11 mm). Minimum flow rate 150 ml/min. Flow indicator with impeller made of polymethylpentene Can be sterilised. Highly chemical-resistant.
Product Detail© 2023 Copyright. All Rights Reserved. Unit 19, Euroway House, Roydsdale Way, Bradford, BD4 6SE, UK
© 2023 Copyright. All Rights Reserved. Unit 19, Euroway House, Roydsdale Way, Bradford, BD4 6SE, UK
